[Sat Jun 15 15:50:28 2013] Detection parameters:
  Position = (290.5, 278.0) = 9 55 53.61 69 37 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.2 +/- 11.7
  Background counts = 17.9
  Rate = 0.008 +/- 0.001

[Sat Jun 15 15:50:31 2013] Off-axis axis estimate = 1.59'
[Sat Jun 15 15:56:26 2013] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 15:56:26 2013] Initial guess for spatial extent in simple fitting = 7.22"
[Sat Jun 15 15:56:26 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.071
[Sat Jun 15 15:56:26 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 7.22"
[Sat Jun 15 21:25:02 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 15 21:25:02 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:02 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 15 21:25:02 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:25:04 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 15 21:25:04 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:04 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 15 21:25:04 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 23:44:48 2013] Source 20 is offset by -2.830880 and -7.636856 pixels which is larger than
2 X fitted extent = 0.830189 x 0.830189, not incorporating fit results
[Sat Jun 15 23:44:48 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 23:44:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 23:44:48 2013] Assessing source extent using major
[Sat Jun 15 23:44:48 2013] Source does appear to be extended
[Sat Jun 15 23:44:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 23:44:48 2013] Source is confused with source 23
[Sat Jun 15 23:45:23 2013] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 23:45:23 2013] Initial guess for spatial extent in simple fitting = 7.22"
[Sat Jun 15 23:45:23 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.071
[Sat Jun 15 23:45:23 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 7.22"
[Sun Jun 16 08:22:28 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jun 16 08:22:28 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:28 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jun 16 08:22:28 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 08:22:31 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jun 16 08:22:31 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:31 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jun 16 08:22:31 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:02:55 2013] Warning, spatial fit 20 centroid is now closest to src. 21
[Sun Jun 16 11:02:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 11:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 11:02:55 2013] Assessing source extent using major
[Sun Jun 16 11:02:55 2013] Source does appear to be extended
[Sun Jun 16 11:02:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 11:03:36 2013] XMMSAS src. selection expression = ellipse(25228.475433, 24137.903564, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 11:03:36 2013] Writing source region out to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20_src.reg
[Sun Jun 16 11:03:36 2013] Extracting stamp from image fullrun_pn_xmm0657801701_pi300-10000_cl_sm2.00.img.gz, (253, 241) - (328, 316)
[Sun Jun 16 11:03:37 2013] XMMSAS bgd. selection expression = annulus(25228.475433, 24137.903564, 1087.500000, 2175.000000, X, Y) && !ellipse(23846.981384, 26082.680664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23075.315704, 26290.569458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22808.997681, 25756.820953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23757.512207, 25449.947357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23659.292053, 24945.932526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22452.379456, 24991.899048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.278503, 24576.817078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24165.494629, 25001.576630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23008.945282, 24461.028595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.918365, 24155.527649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.471039, 23699.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23861.530945, 23658.936279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22557.733673, 23612.760010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.268555, 23271.604675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23172.086212, 23702.330078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.033707, 23361.936737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.176147, 23278.850250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24215.754333, 23080.447876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22866.550751, 22637.679260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26563.240967, 22809.812775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.918640, 22350.317474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.151917, 22053.201111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25155.486023, 21524.129440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27349.089813, 21620.484436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27961.039551, 21341.073135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26893.014191, 21148.092331, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 11:03:37 2013] Writing fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20.gif
[Sun Jun 16 11:17:52 2013] Mean detx,y = (nan, nan) 
[Sun Jun 16 11:17:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 11:18:27 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 11:18:27 2013] Setting source spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jun 16 11:18:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Jun 16 12:09:56 2013] Not generating rmf since there are only 65 counts
[Sun Jun 16 12:09:56 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:20:19 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:20:19 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 0.00
[Sun Jun 16 14:20:19 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20_bgd.pi.gz = 0.00
[Sun Jun 16 14:20:19 2013] Got source and background scale factors 1183320.000000, 3756844.000000
[Sun Jun 16 14:20:19 2013] User source parameters:
  Position = (290.5, 278.0) = 9 55 53.61 69 37 31.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 0.0 +/- 1.9
  Background aperture counts = 0.0
  Rate = 0 +/- 0.02

[Sun Jun 16 14:20:19 2013] Updating counts from extracted products
[Sun Jun 16 14:20:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:20:40 2013] Using photon index=1.80, rate=0, arf fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20.arf
[Sun Jun 16 14:20:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:20:40 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 14:21:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:21:11 2013] xmm0657801701/analysis//spectral/fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete