[Sat Jun 15 15:50:27 2013] Detection parameters:
  Position = (146.9, 195.1) = 9 57 52.69 69 31 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.8 +/- 11.1
  Background counts = 13.9
  Rate = 0.005 +/- 0.0009

[Sat Jun 15 15:50:31 2013] Off-axis axis estimate = 13.30'
[Sat Jun 15 15:56:26 2013] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 15:56:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 15:56:26 2013] Initial guess for spatial extent in simple fitting = 13.08"
[Sat Jun 15 15:56:26 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.935
[Sat Jun 15 15:56:26 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 13.08"
[Sat Jun 15 21:25:01 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 15 21:25:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src2.csv
[Sat Jun 15 21:25:01 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 15 21:25:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src2.csv
[Sat Jun 15 21:25:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:25:03 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 15 21:25:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 15 21:25:03 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 15 21:25:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 15 21:25:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 23:44:47 2013] Warning, spatial fit 2 centroid is now closest to src. 84
[Sat Jun 15 23:44:48 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 23:44:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 23:44:48 2013] Assessing source extent using major
[Sat Jun 15 23:44:48 2013] Source does appear to be extended
[Sat Jun 15 23:44:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 23:44:48 2013] Source is confused with source 4
[Sat Jun 15 23:45:23 2013] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 23:45:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 23:45:23 2013] Initial guess for spatial extent in simple fitting = 13.08"
[Sat Jun 15 23:45:23 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.935
[Sat Jun 15 23:45:23 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 13.08"
[Sun Jun 16 08:22:27 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 16 08:22:27 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src2.csv
[Sun Jun 16 08:22:27 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 16 08:22:27 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src2.csv
[Sun Jun 16 08:22:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 08:22:30 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 16 08:22:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 16 08:22:30 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 16 08:22:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 16 08:22:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:02:55 2013] Warning, spatial fit 2 centroid is now closest to src. 79
[Sun Jun 16 11:02:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 11:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 11:02:55 2013] Assessing source extent using major
[Sun Jun 16 11:02:55 2013] Source does appear to be extended
[Sun Jun 16 11:02:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 11:03:35 2013] XMMSAS src. selection expression = ellipse(12730.086975, 16926.286438, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 11:03:35 2013] Writing source region out to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 16 11:03:35 2013] Extracting stamp from image fullrun_pn_xmm0657801701_pi300-10000_cl_sm2.00.img.gz, (109, 158) - (184, 233)
[Sun Jun 16 11:03:35 2013] XMMSAS bgd. selection expression = annulus(12730.086975, 16926.286438, 1087.500000, 2175.000000, X, Y) && !ellipse(13588.915939, 17517.986267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12175.002655, 16534.272690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12947.809998, 17307.807510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14647.938095, 18796.380219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11727.441711, 16149.695679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15694.340897, 19820.030746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15348.697235, 19303.797470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15306.982742, 18836.371597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14097.776199, 17866.918182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14357.742065, 17329.432724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13426.339203, 16929.979584, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 11:03:35 2013] Writing fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2.gif
[Sun Jun 16 11:04:25 2013] Mean detx,y = (-17156.00, -451.00) 
[Sun Jun 16 11:04:29 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 11:04:59 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 11:05:00 2013] Setting source spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 16 11:05:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 16 12:04:16 2013] Not generating rmf since there are only 55 counts
[Sun Jun 16 12:04:16 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:20:14 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:20:14 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1.00
[Sun Jun 16 14:20:14 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1.00
[Sun Jun 16 14:20:14 2013] Got source and background scale factors 1115076.000000, 5857220.000000
[Sun Jun 16 14:20:14 2013] User source parameters:
  Position = (146.9, 195.1) = 9 57 52.69 69 31 31.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 0.8 +/- 2.3
  Background aperture counts = 0.2
  Rate = 0.01 +/- 0.03

[Sun Jun 16 14:20:14 2013] Updating counts from extracted products
[Sun Jun 16 14:20:14 2013] Set source signif. to 0.81/0.44 = 1.86
[Sun Jun 16 14:20:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:20:40 2013] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2.arf
[Sun Jun 16 14:20:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:20:40 2013] Updating source flux to 1.1e-13
[Sun Jun 16 14:21:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:21:11 2013] xmm0657801701/analysis//spectral/fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete