[Sat Jun 15 15:50:28 2013] Detection parameters:
  Position = (278.3, 287.9) = 9 56 3.80 69 38 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.4 +/- 12.6
  Background counts = 16.9
  Rate = 0.009 +/- 0.001

[Sat Jun 15 15:50:31 2013] Off-axis axis estimate = 1.65'
[Sat Jun 15 15:56:26 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 15:56:26 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Jun 15 15:56:26 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sat Jun 15 15:56:26 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.25"
[Sat Jun 15 21:25:02 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 15 21:25:02 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:02 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 15 21:25:02 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:25:04 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 15 21:25:04 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:04 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 15 21:25:04 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 23:44:48 2013] Warning, spatial fit 17 centroid is now closest to src. 12
[Sat Jun 15 23:44:48 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 23:44:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 23:44:48 2013] Assessing source extent using major
[Sat Jun 15 23:44:48 2013] Source does appear to be extended
[Sat Jun 15 23:44:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 23:44:48 2013] Source is confused with source 12
[Sat Jun 15 23:45:23 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 23:45:23 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Jun 15 23:45:23 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sat Jun 15 23:45:23 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.25"
[Sun Jun 16 08:22:28 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 16 08:22:28 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:28 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 16 08:22:28 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 08:22:31 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 16 08:22:31 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:31 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 16 08:22:31 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:02:55 2013] Warning, spatial fit 17 centroid is now closest to src. 12
[Sun Jun 16 11:02:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 11:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 11:02:55 2013] Assessing source extent using major
[Sun Jun 16 11:02:55 2013] Source does appear to be extended
[Sun Jun 16 11:02:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 11:03:36 2013] XMMSAS src. selection expression = ellipse(24165.494629, 25001.576630, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 11:03:36 2013] Writing source region out to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17_src.reg
[Sun Jun 16 11:03:36 2013] Extracting stamp from image fullrun_pn_xmm0657801701_pi300-10000_cl_sm2.00.img.gz, (241, 250) - (316, 325)
[Sun Jun 16 11:03:36 2013] XMMSAS bgd. selection expression = annulus(24165.494629, 25001.576630, 1087.500000, 2175.000000, X, Y) && !ellipse(23846.981384, 26082.680664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23075.315704, 26290.569458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22808.997681, 25756.820953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22076.042328, 25434.779175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23757.512207, 25449.947357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23659.292053, 24945.932526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22452.379456, 24991.899048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21588.539124, 24742.355499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21158.381897, 24622.029572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.278503, 24576.817078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23008.945282, 24461.028595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22080.153641, 24410.628174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25228.475433, 24137.903564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.918365, 24155.527649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.471039, 23699.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21838.960159, 23871.243042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23861.530945, 23658.936279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21304.712509, 23708.027771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22557.733673, 23612.760010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.268555, 23271.604675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23172.086212, 23702.330078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.033707, 23361.936737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.176147, 23278.850250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24215.754333, 23080.447876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21680.715103, 22934.015045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21279.408752, 22825.283630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22866.550751, 22637.679260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26563.240967, 22809.812775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.918640, 22350.317474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.151917, 22053.201111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25511.066132, 27945.751892, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 11:03:36 2013] Writing fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17.gif
[Sun Jun 16 11:15:54 2013] Mean detx,y = (nan, nan) 
[Sun Jun 16 11:15:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 11:16:20 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 11:16:21 2013] Setting source spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 16 11:16:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 16 12:09:28 2013] Not generating rmf since there are only 76 counts
[Sun Jun 16 12:09:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:20:18 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:20:18 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 0.00
[Sun Jun 16 14:20:18 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17_bgd.pi.gz = 0.00
[Sun Jun 16 14:20:18 2013] Got source and background scale factors 1334944.000000, 2830644.000000
[Sun Jun 16 14:20:18 2013] User source parameters:
  Position = (278.3, 287.9) = 9 56 3.80 69 38 15.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 0.0 +/- 1.9
  Background aperture counts = 0.0
  Rate = 0 +/- 0.02

[Sun Jun 16 14:20:18 2013] Updating counts from extracted products
[Sun Jun 16 14:20:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:20:40 2013] Using photon index=1.80, rate=0, arf fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17.arf
[Sun Jun 16 14:20:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:20:40 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 14:21:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:21:11 2013] xmm0657801701/analysis//spectral/fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete