[Wed Jun 19 07:32:30 2013] Detection parameters:
  Position = (291.6, 275.8) = 8 21 57.34 -43 0 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67173.3 +/- 321.7
  Background counts = 3629.7
  Rate = 3 +/- 0.01

[Wed Jun 19 07:32:31 2013] Off-axis axis estimate = 1.71'
[Wed Jun 19 08:02:10 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 08:02:10 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jun 19 08:02:10 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Wed Jun 19 08:02:10 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jun 19 14:13:40 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 19 14:13:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 19 14:13:40 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 19 14:13:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 19 14:13:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 14:13:41 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 19 14:13:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 19 14:13:41 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 19 14:13:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 19 14:13:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657600201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:58:43 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.136053 pixels away
[Thu Jun 20 23:58:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 23:58:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 23:58:43 2013] Assessing source extent using major
[Thu Jun 20 23:58:43 2013] Source does appear to be extended
[Thu Jun 20 23:58:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 00:00:37 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 00:00:37 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 21 00:00:37 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri Jun 21 00:00:37 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Fri Jun 21 13:49:34 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 21 13:49:35 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 21 13:49:35 2013] Fit fullrun_pn_xmm0657600201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 21 13:49:35 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 21 13:49:35 2013] fullrun_pn_xmm0657600201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 21 13:49:35 2013] Fit fullrun_pn_xmm0657600201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 22 19:45:57 2013] Spatial fit model total counts = 118150.000000, observed total counts = 123725.000000
[Sat Jun 22 19:45:57 2013] Offset between fit and detection position for source 1 = 0.302608 pixels
[Sat Jun 22 19:45:57 2013] 113723.500000 total counts/ 25600.000000 bgd. counts: snr = 550.771875
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.302608 pixels
  Position = (291.9, 275.7) = 8 21 57.23 -43 0 17.7
  Extent = 14.3 (14.1-14.4)" x 12.1 (12.0-12.2)", rotation angle = 300 (298-302) degrees
  Source counts = 88123.5 +/- 337.2
  Background counts = 25600.0
  Rate = 2 +/- 0.009
[Sat Jun 22 19:45:57 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 19:45:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 19:45:57 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 19:45:57 2013] Source does appear to be extended
[Sat Jun 22 19:45:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Sat Jun 22 19:47:54 2013] Counts = 88123.500000, rescaling region sizes by 3.000000
[Sat Jun 22 19:47:54 2013] XMMSAS src. selection expression = ellipse(25344.774800, 23935.848400, 2565.792074, 2172.546063, 300.063000, X, Y)
[Sat Jun 22 19:47:54 2013] Writing source region out to fullrun_pn_xmm0657600201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 22 19:47:54 2013] Extracting stamp from image fullrun_pn_xmm0657600201_pi300-10000_cl_sm2.00.img.gz, (144, 128) - (439, 423)
[Sat Jun 22 19:47:54 2013] XMMSAS bgd. selection expression = annulus(25344.774800, 23935.848400, 12828.960369, 25657.920738, X, Y) && !ellipse(26700.748000, 25473.908000, 6458.544186, 6458.544186, 0.000000, X, Y) && !ellipse(27287.825800, 24140.698200, 3509.016101, 3509.016101, 0.000000, X, Y) && !ellipse(25240.856000, 26601.414000, 3268.704094, 3268.704094, 0.000000, X, Y) && !ellipse(25916.887360, 28390.402924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25862.287000, 27989.483800, 3444.048099, 3444.048099, 0.000000, X, Y) && !ellipse(21542.708008, 27071.644562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21781.120346, 26132.096069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21847.989914, 25621.361359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26357.090000, 26084.274000, 3229.272093, 3229.272093, 302.329700, X, Y) && !ellipse(21982.550781, 25111.162964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.830902, 24228.304657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24311.564000, 23088.637200, 3798.552109, 3798.552109, 0.000000, X, Y)
[Sat Jun 22 19:47:54 2013] Writing fullrun_pn_xmm0657600201_pi300-10000_pass1_cl_src1.gif
[Sat Jun 22 19:51:04 2013] Mean detx,y = (31.64, 317.79) 
[Sat Jun 22 19:51:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 19:56:09 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 19:56:09 2013] Setting source spectrum file to fullrun_pn_xmm0657600201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 22 19:56:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0657600201_pi300-10000_pass1_cl_src1_bgd.pi.gz