[Thu Nov 24 01:33:28 2011] Detection parameters:
  Position = (112.0, 318.2) = 5 41 31.69 -1 53 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.3 +/- 18.1
  Background counts = 18.9
  Rate = 0.004 +/- 0.0004

[Thu Nov 24 01:33:29 2011] Off-axis axis estimate = 13.59'
[Thu Nov 24 03:25:44 2011] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:25:44 2011] Initial guess for spatial extent in simple fitting = 13.22"
[Thu Nov 24 03:25:44 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.117
[Thu Nov 24 03:25:44 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 13.22"
[Thu Nov 24 05:04:14 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_src15.ximg exists
[Thu Nov 24 05:04:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_src15.csv
[Thu Nov 24 05:04:14 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Nov 24 05:04:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_src15.csv
[Thu Nov 24 05:04:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 05:04:15 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Nov 24 05:04:15 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Nov 24 05:04:15 2011] Fit fullrun_mos2_xmm0657200201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Nov 24 05:04:30 2011] Spatial fit model total counts = 1030.250000, observed total counts = 1030.000000
[Thu Nov 24 05:04:30 2011] Offset between fit and detection position for source 17 = 1.848318 pixels
[Thu Nov 24 05:04:30 2011] Warning, changing simple spatial fit ID from 15 to 11
[Thu Nov 24 05:04:30 2011] 743.626700 total counts/ 674.013000 bgd. counts: snr = 2.681394
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.848318 pixels
  Position = (113.9, 318.4) = 5 41 31.16 -1 53 57.2
  Extent = 4.7 (4.2-6.1)", rotation angle = 0
  Source counts = 69.6 +/- 27.3
  Background counts = 674.0
  Rate = 0.001 +/- 0.0006
[Thu Nov 24 05:04:30 2011] Spatial fit model total counts = 683.508000, observed total counts = 682.000000
[Thu Nov 24 05:04:30 2011] Offset between fit and detection position for source 17 = 1.772020 pixels
[Thu Nov 24 05:04:30 2011] Warning, changing simple spatial fit ID from 11 to 15
[Thu Nov 24 05:04:30 2011] 473.425000 total counts/ 367.243000 bgd. counts: snr = 5.540821
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.772020 pixels
  Position = (112.1, 318.4) = 5 41 31.67 -1 53 57.0
  Extent = 4.3 (3.5-5.3)", rotation angle = 0
  Source counts = 106.2 +/- 21.8
  Background counts = 367.2
  Rate = 0.002 +/- 0.0005
[Thu Nov 24 05:04:30 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 05:04:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 05:04:30 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 05:04:30 2011] Source does appear to be extended
[Thu Nov 24 05:04:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:07:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:07:06 2011] Initial guess for spatial extent in simple fitting = 4.29"
[Thu Nov 24 06:07:06 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.020
[Thu Nov 24 06:07:06 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 4.29"
[Thu Nov 24 07:44:12 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_src15.ximg exists
[Thu Nov 24 07:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_src15.csv
[Thu Nov 24 07:44:12 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Nov 24 07:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_src15.csv
[Thu Nov 24 07:44:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:44:12 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Nov 24 07:44:12 2011] fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Nov 24 07:44:12 2011] Fit fullrun_mos2_xmm0657200201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Nov 24 07:44:23 2011] Spatial fit model total counts = 1030.300000, observed total counts = 1030.000000
[Thu Nov 24 07:44:23 2011] Offset between fit and detection position for source 17 = 1.465993 pixels
[Thu Nov 24 07:44:23 2011] Warning, changing simple spatial fit ID from 15 to 11
[Thu Nov 24 07:44:23 2011] 747.988500 total counts/ 679.277000 bgd. counts: snr = 2.636368
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.465993 pixels
  Position = (113.6, 318.4) = 5 41 31.24 -1 53 57.0
  Extent = 4.6 (3.9-6.5)", rotation angle = 0
  Source counts = 68.7 +/- 27.3
  Background counts = 679.3
  Rate = 0.001 +/- 0.0006
[Thu Nov 24 07:44:23 2011] Spatial fit model total counts = 1040.640000, observed total counts = 1037.000000
[Thu Nov 24 07:44:23 2011] Offset between fit and detection position for source 17 = 1.447235 pixels
[Thu Nov 24 07:44:23 2011] Warning, changing simple spatial fit ID from 11 to 26
[Thu Nov 24 07:44:23 2011] 1039.537000 total counts/ 912.299000 bgd. counts: snr = 4.212581
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.447235 pixels
  Position = (112.1, 318.3) = 5 41 31.66 -1 53 57.6
  Extent = 6.5" x 6.5", rotation angle = 0
  Source counts = 127.2 +/- 32.2
  Background counts = 912.3
  Rate = 0.003 +/- 0.0007
[Thu Nov 24 07:44:23 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:44:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:44:23 2011] Assessing source extent using major
[Thu Nov 24 07:44:23 2011] Source does appear to be extended
[Thu Nov 24 07:44:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 09:11:56 2011] XMMSAS src. selection expression = ellipse(9705.504000, 27643.148000, 388.092011, 388.092011, 0.000000, X, Y)
[Thu Nov 24 09:11:56 2011] Writing source region out to fullrun_mos2_xmm0657200201_pi300-10000_pass1_cl_src17_src.reg
[Thu Nov 24 09:11:56 2011] Extracting stamp from image fullrun_mos2_xmm0657200201_pi300-10000_cl_sm2.00.img.gz, (90, 296) - (134, 341)
[Thu Nov 24 09:11:56 2011] XMMSAS bgd. selection expression = annulus(9705.504000, 27643.148000, 646.820019, 1293.640037, X, Y) && !ellipse(8970.195114, 28335.207520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7894.395828, 27023.227448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8849.026215, 26756.243011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8171.870285, 29093.738770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8029.652000, 27811.890000, 1766.384051, 674.506419, 90.000000, X, Y) && !ellipse(10844.480000, 26548.438000, 2069.824060, 2069.824060, 0.000000, X, Y) && !ellipse(8414.484900, 25008.873600, 1660.272048, 581.978417, 70.897967, X, Y)
[Thu Nov 24 09:11:56 2011] Writing fullrun_mos2_xmm0657200201_pi300-10000_pass1_cl_src17.gif
[Thu Nov 24 09:22:28 2011] Mean detx,y = (-15096.73, -948.05) 
[Thu Nov 24 09:22:29 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 09:22:33 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 09:22:33 2011] Setting source spectrum file to fullrun_mos2_xmm0657200201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Nov 24 09:22:33 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0657200201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Nov 24 12:40:05 2011] Updating aperture counts using extracted products
[Thu Nov 24 12:40:05 2011] Error reading totcts from fullrun_mos2_xmm0657200201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Nov 24 12:40:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 12:40:05 2011] Using photon index=1.80, rate=0.0027, arf fullrun_mos2_xmm0657200201_pi300-10000_pass1_cl_src17.arf
[Thu Nov 24 12:40:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 12:40:05 2011] Updating source flux to 9.2e-14