[Wed Jun 13 03:38:36 2012] Detection parameters:
  Position = (89.8, 321.0) = 5 41 41.45 -1 53 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 724.4 +/- 35.1
  Background counts = 27.4
  Rate = 0.008 +/- 0.0004

[Wed Jun 13 03:38:37 2012] Off-axis axis estimate = 15.21'
[Wed Jun 13 07:40:07 2012] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:40:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 07:40:07 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Wed Jun 13 07:40:07 2012] source mask rpix=3.2, npix_max = 55, mask sum = 31, frac = 0.558
[Wed Jun 13 07:40:07 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 14.04"
[Wed Jun 13 12:21:09 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun 13 12:21:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_src14.csv
[Wed Jun 13 12:21:09 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun 13 12:21:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_src14.csv
[Wed Jun 13 12:21:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:21:11 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun 13 12:21:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun 13 12:21:11 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun 13 12:21:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Jun 13 12:21:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:21:39 2012] Warning, spatial fit 14 centroid is now closest to src. 31
[Wed Jun 13 12:21:40 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:21:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:21:40 2012] Assessing source extent using major
[Wed Jun 13 12:21:40 2012] Source does appear to be extended
[Wed Jun 13 12:21:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 16:59:43 2012] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 16:59:43 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Wed Jun 13 16:59:43 2012] source mask rpix=3.2, npix_max = 55, mask sum = 31, frac = 0.558
[Wed Jun 13 16:59:43 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 14.04"
[Wed Jun 13 20:25:06 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_src14.ximg exists
[Wed Jun 13 20:25:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_src14.csv
[Wed Jun 13 20:25:06 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Jun 13 20:25:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_src14.csv
[Wed Jun 13 20:25:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:25:07 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Jun 13 20:25:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Jun 13 20:25:07 2012] fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Jun 13 20:25:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Jun 13 20:25:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:25:29 2012] Source 8 is offset by -0.221869 and -8.928041 pixels which is larger than
2 X fitted extent = 1.557526 x 1.557526, not incorporating fit results
[Wed Jun 13 20:25:29 2012] Warning, spatial fit 14 centroid is now closest to src. 3
[Wed Jun 13 20:25:29 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 20:25:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 20:25:29 2012] Assessing source extent using major
[Wed Jun 13 20:25:29 2012] Source does appear to be extended
[Wed Jun 13 20:25:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 02:58:05 2012] XMMSAS src. selection expression = ellipse(7765.659431, 27881.298401, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 02:58:05 2012] Writing source region out to fullrun_mos2_xmm0657200101_pi300-10000_pass1_cl_src8_src.reg
[Thu Jun 14 02:58:05 2012] Extracting stamp from image fullrun_mos2_xmm0657200101_pi300-10000_cl_sm2.00.img.gz, (52, 284) - (127, 359)
[Thu Jun 14 02:58:05 2012] XMMSAS bgd. selection expression = annulus(7765.659431, 27881.298401, 1087.500000, 2175.000000, X, Y) && !ellipse(8460.462013, 29618.537170, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(8658.553085, 28148.543030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8153.664000, 27331.294000, 273.578408, 273.578408, 0.000000, X, Y) && !ellipse(8899.757187, 27534.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9542.656000, 26209.596000, 2165.464062, 2165.464062, 0.000000, X, Y) && !ellipse(7728.963608, 26574.739899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9169.198853, 28914.829620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10614.231735, 25697.048279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7605.695908, 26043.184448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9651.386024, 25626.615662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9268.661560, 25076.153748, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 02:58:05 2012] Writing fullrun_mos2_xmm0657200101_pi300-10000_pass1_cl_src8.gif
[Thu Jun 14 03:15:46 2012] Mean detx,y = (-16787.76, -884.43) 
[Thu Jun 14 03:15:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 03:15:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 03:15:58 2012] Setting source spectrum file to fullrun_mos2_xmm0657200101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 14 03:15:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0657200101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jun 14 03:51:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 03:51:50 2012] rmf not generated due to insufficient counts
[Thu Jun 14 04:07:11 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:07:11 2012] Error reading totcts from fullrun_mos2_xmm0657200101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 14 04:07:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:07:12 2012] Using photon index=1.80, rate=0.00757, arf fullrun_mos2_xmm0657200101_pi300-10000_pass1_cl_src8.arf
[Thu Jun 14 04:07:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:07:12 2012] Getting flux using calc_pl_flux failed
[Thu Jun 14 04:11:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting