[Wed Jun 13 03:38:03 2012] Detection parameters:
  Position = (102.5, 213.1) = 5 41 37.78 -2 1 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.5 +/- 14.7
  Background counts = 27.6
  Rate = 0.0008 +/- 0.0002

[Wed Jun 13 03:38:03 2012] Off-axis axis estimate = 15.49'
[Wed Jun 13 04:04:16 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 04:04:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 04:04:16 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Wed Jun 13 04:04:16 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.991
[Wed Jun 13 04:04:16 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 14.17"
[Wed Jun 13 07:40:05 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src51.ximg exists
[Wed Jun 13 07:40:05 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Jun 13 07:40:05 2012] Fit fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src51 appears to have run properly
[Wed Jun 13 07:40:07 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Jun 13 07:40:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jun 13 07:40:07 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Jun 13 07:40:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jun 13 07:40:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:21:27 2012] Warning, spatial fit 51 centroid is now closest to src. 5
[Wed Jun 13 12:21:27 2012] Source 45 is offset by 7.540299 and 5.109253 pixels which is larger than
2 X fitted extent = 1.505039 x 1.505039, not incorporating fit results
[Wed Jun 13 12:21:28 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:21:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:21:28 2012] Assessing source extent using major
[Wed Jun 13 12:21:28 2012] Source does appear to be extended
[Wed Jun 13 12:21:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:26:32 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 12:26:32 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Wed Jun 13 12:26:32 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.991
[Wed Jun 13 12:26:32 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 14.17"
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src49.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src49.csv
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src49_1.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src49.csv
[Wed Jun 13 16:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:59:42 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Wed Jun 13 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Wed Jun 13 16:59:42 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Wed Jun 13 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Wed Jun 13 16:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:25:21 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 21.960298 pixels away
[Wed Jun 13 20:25:21 2012] Warning, spatial fit 49 centroid is now closest to src. 54
[Wed Jun 13 20:25:21 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 20:25:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 20:25:21 2012] Assessing source extent using major
[Wed Jun 13 20:25:21 2012] Source does appear to be extended
[Wed Jun 13 20:25:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:26:09 2012] XMMSAS src. selection expression = ellipse(8869.000000, 18495.510971, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 21:26:09 2012] Writing source region out to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src45_src.reg
[Wed Jun 13 21:26:09 2012] Extracting stamp from image fullrun_mos1_xmm0657200101_pi300-10000_cl_sm2.00.img.gz, (65, 176) - (140, 251)
[Wed Jun 13 21:26:09 2012] XMMSAS bgd. selection expression = annulus(8869.000000, 18495.510971, 1087.500000, 2175.000000, X, Y) && !ellipse(9879.675400, 17973.297241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8522.984000, 20641.586000, 443.637613, 443.637613, 0.000000, X, Y) && !ellipse(9323.513138, 16930.724319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11454.758255, 16577.431519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11217.403082, 16608.097020, 2118.768061, 721.698293, 0.000000, X, Y)
[Wed Jun 13 21:26:09 2012] Writing fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src45.gif
[Wed Jun 13 21:52:03 2012] Mean detx,y = (8256.68, 14378.20) 
[Wed Jun 13 21:52:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:52:13 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:52:13 2012] Setting source spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Jun 13 21:52:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Jun 14 02:49:59 2012] Not generating rmf since there are only 76 counts
[Thu Jun 14 02:49:59 2012] rmf not generated due to insufficient counts
[Thu Jun 14 04:07:10 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:07:10 2012] Error reading totcts from fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Jun 14 04:07:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:07:11 2012] Using photon index=1.80, rate=0.0008, arf fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src45.arf
[Thu Jun 14 04:07:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:07:11 2012] Updating source flux to 2.4e-14
[Thu Jun 14 04:07:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting