[Wed Jun 13 03:38:03 2012] Detection parameters:
  Position = (100.8, 292.9) = 5 41 38.26 -1 55 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.1 +/- 14.6
  Background counts = 32.3
  Rate = 0.0007 +/- 0.0002

[Wed Jun 13 03:38:03 2012] Off-axis axis estimate = 14.33'
[Wed Jun 13 04:04:16 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 04:04:16 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Wed Jun 13 04:04:16 2012] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.875
[Wed Jun 13 04:04:16 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 13.60"
[Wed Jun 13 07:40:06 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src59.ximg exists
[Wed Jun 13 07:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src59.csv
[Wed Jun 13 07:40:06 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Jun 13 07:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src59.csv
[Wed Jun 13 07:40:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:40:07 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Jun 13 07:40:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Wed Jun 13 07:40:07 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Jun 13 07:40:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Wed Jun 13 07:40:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:21:27 2012] Spatial fit model total counts = 1152.030000, observed total counts = 1085.000000
[Wed Jun 13 12:21:27 2012] Offset between fit and detection position for source 27 = 2.195902 pixels
[Wed Jun 13 12:21:27 2012] Warning, changing simple spatial fit ID from 59 to 48
[Wed Jun 13 12:21:27 2012] 1128.058000 total counts/ 542.832000 bgd. counts: snr = 25.118338
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.195902 pixels
  Position = (102.7, 291.7) = 5 41 37.72 -1 55 42.9
  Extent = 27.4 (27.3-54.9)", rotation angle = 0
  Source counts = 585.2 +/- 33.6
  Background counts = 542.8
  Rate = 0.006 +/- 0.0004
[Wed Jun 13 12:21:28 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:21:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:21:28 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 12:21:28 2012] Source does appear to be extended
[Wed Jun 13 12:21:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:21:28 2012] Source is confused with source 29
[Wed Jun 13 12:26:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 12:26:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 12:26:32 2012] Initial guess for spatial extent in simple fitting = 27.43"
[Wed Jun 13 12:26:32 2012] source mask rpix=6.3, npix_max = 185, mask sum = 166, frac = 0.896
[Wed Jun 13 12:26:32 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 27.43"
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src56.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src56.csv
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src56_1.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src56.csv
[Wed Jun 13 16:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:59:42 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Wed Jun 13 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed Jun 13 16:59:42 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Wed Jun 13 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed Jun 13 16:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:25:21 2012] Warning, spatial fit 56 centroid is now closest to src. 16
[Wed Jun 13 20:25:21 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 20:25:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 20:25:21 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 20:25:21 2012] Source does appear to be extended
[Wed Jun 13 20:25:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:26:09 2012] XMMSAS src. selection expression = ellipse(8885.454000, 25331.726000, 1645.770047, 1645.770047, 0.000000, X, Y)
[Wed Jun 13 21:26:09 2012] Writing source region out to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src27_src.reg
[Wed Jun 13 21:26:09 2012] Extracting stamp from image fullrun_mos1_xmm0657200101_pi300-10000_cl_sm2.00.img.gz, (8, 197) - (197, 386)
[Wed Jun 13 21:26:09 2012] XMMSAS bgd. selection expression = annulus(8885.454000, 25331.726000, 2742.950079, 5485.900158, X, Y) && !ellipse(8468.684000, 29599.634000, 1127.361632, 1127.361632, 0.000000, X, Y) && !ellipse(8650.212000, 28046.576000, 305.757609, 305.757609, 0.000000, X, Y) && !ellipse(8392.558000, 27436.700000, 4273.488123, 1009.792029, 29.394000, X, Y) && !ellipse(9121.408000, 27369.556000, 668.012819, 668.012819, 0.000000, X, Y) && !ellipse(9779.934000, 28281.836000, 874.152025, 874.152025, 0.000000, X, Y) && !ellipse(7833.970680, 27867.436493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8522.984000, 20641.586000, 443.637613, 443.637613, 0.000000, X, Y) && !ellipse(10389.758965, 22642.126434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14026.414322, 21371.096207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8915.877861, 26934.222900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9144.570801, 28926.939209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10696.065712, 27424.896210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10630.977200, 25781.476800, 412.736812, 412.736812, 0.000000, X, Y) && !ellipse(12151.453000, 26358.243200, 532.425615, 193.416006, 100.105100, X, Y) && !ellipse(12373.683807, 19787.559738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9314.324081, 25072.837616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9033.883293, 31341.144073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9868.378000, 25226.994200, 2136.744061, 2136.744061, 0.000000, X, Y) && !ellipse(9538.784800, 23548.680800, 1889.696054, 746.546421, 16.356200, X, Y) && !ellipse(13415.234543, 21293.493683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14052.097748, 24470.822998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8730.038422, 22193.301697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9139.218262, 26427.653931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8530.472000, 23921.832000, 2636.240076, 2636.240076, 0.000000, X, Y) && !ellipse(11655.385544, 31487.221130, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 21:26:09 2012] Writing fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src27.gif
[Wed Jun 13 21:53:09 2012] Mean detx,y = (1167.32, 15109.05) 
[Wed Jun 13 21:53:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:53:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:53:58 2012] Setting source spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jun 13 21:53:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Jun 14 04:07:10 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:07:10 2012] Error reading totcts from fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 14 04:07:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:07:11 2012] Using photon index=1.80, rate=0.00612, arf fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src27.arf
[Thu Jun 14 04:07:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:07:11 2012] Updating source flux to 1.6e-13
[Thu Jun 14 04:07:13 2012] Flag c found in src. 27 procflags, skipping spectral fitting