[Wed Jun 13 03:38:02 2012] Detection parameters:
  Position = (105.6, 304.3) = 5 41 36.87 -1 54 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.2 +/- 17.4
  Background counts = 33.2
  Rate = 0.0009 +/- 0.0002

[Wed Jun 13 03:38:03 2012] Off-axis axis estimate = 13.99'
[Wed Jun 13 04:04:16 2012] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 04:04:16 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Wed Jun 13 04:04:16 2012] source mask rpix=3.1, npix_max = 51, mask sum = 44, frac = 0.856
[Wed Jun 13 04:04:16 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 13.42"
[Wed Jun 13 07:40:05 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src47.ximg exists
[Wed Jun 13 07:40:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src47.csv
[Wed Jun 13 07:40:05 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed Jun 13 07:40:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src47.csv
[Wed Jun 13 07:40:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:40:07 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed Jun 13 07:40:07 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed Jun 13 07:40:07 2012] Fit fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Wed Jun 13 12:21:27 2012] Source 22 is offset by 5.161336 and 3.243379 pixels which is larger than
2 X fitted extent = 1.539678 x 1.539678, not incorporating fit results
[Wed Jun 13 12:21:27 2012] Warning, spatial fit 47 centroid is now closest to src. 4
[Wed Jun 13 12:21:28 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:21:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:21:28 2012] Assessing source extent using major
[Wed Jun 13 12:21:28 2012] Source does appear to be extended
[Wed Jun 13 12:21:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:21:28 2012] Source is confused with source 4
[Wed Jun 13 12:21:28 2012] Source is confused with source 20
[Wed Jun 13 12:21:28 2012] Source is confused with source 28
[Wed Jun 13 12:21:28 2012] Source is confused with source 27
[Wed Jun 13 12:26:32 2012] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 12:26:32 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Wed Jun 13 12:26:32 2012] source mask rpix=3.1, npix_max = 51, mask sum = 44, frac = 0.856
[Wed Jun 13 12:26:32 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 13.42"
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src46.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src46.csv
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src46_1.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src46.csv
[Wed Jun 13 16:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:59:42 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Wed Jun 13 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Wed Jun 13 16:59:42 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Wed Jun 13 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Wed Jun 13 16:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:25:21 2012] Warning, spatial fit 46 centroid is now closest to src. 28
[Wed Jun 13 20:25:21 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 20:25:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 20:25:21 2012] Assessing source extent using major
[Wed Jun 13 20:25:21 2012] Source does appear to be extended
[Wed Jun 13 20:25:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:26:09 2012] XMMSAS src. selection expression = ellipse(9139.218262, 26427.653931, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 21:26:09 2012] Writing source region out to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src22_src.reg
[Wed Jun 13 21:26:09 2012] Extracting stamp from image fullrun_mos1_xmm0657200101_pi300-10000_cl_sm2.00.img.gz, (68, 267) - (143, 342)
[Wed Jun 13 21:26:09 2012] XMMSAS bgd. selection expression = annulus(9139.218262, 26427.653931, 1087.500000, 2175.000000, X, Y) && !ellipse(8468.684000, 29599.634000, 1127.361632, 1127.361632, 0.000000, X, Y) && !ellipse(8650.212000, 28046.576000, 305.757609, 305.757609, 0.000000, X, Y) && !ellipse(8392.558000, 27436.700000, 4273.488123, 1009.792029, 29.394000, X, Y) && !ellipse(9121.408000, 27369.556000, 668.012819, 668.012819, 0.000000, X, Y) && !ellipse(9779.934000, 28281.836000, 874.152025, 874.152025, 0.000000, X, Y) && !ellipse(7833.970680, 27867.436493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8915.877861, 26934.222900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9144.570801, 28926.939209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10696.065712, 27424.896210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10630.977200, 25781.476800, 412.736812, 412.736812, 0.000000, X, Y) && !ellipse(9314.324081, 25072.837616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9868.378000, 25226.994200, 2136.744061, 2136.744061, 0.000000, X, Y) && !ellipse(9538.784800, 23548.680800, 1889.696054, 746.546421, 16.356200, X, Y) && !ellipse(8530.472000, 23921.832000, 2636.240076, 2636.240076, 0.000000, X, Y) && !ellipse(8885.454000, 25331.726000, 2194.360063, 2194.360063, 0.000000, X, Y)
[Wed Jun 13 21:26:09 2012] Writing fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src22.gif
[Wed Jun 13 21:50:40 2012] Mean detx,y = (225.67, 15392.44) 
[Wed Jun 13 21:50:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:50:50 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:50:50 2012] Setting source spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jun 13 21:50:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Jun 14 02:45:54 2012] Not generating rmf since there are only 87 counts
[Thu Jun 14 02:45:54 2012] rmf not generated due to insufficient counts
[Thu Jun 14 04:07:10 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:07:10 2012] Error reading totcts from fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Jun 14 04:07:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:07:11 2012] Using photon index=1.80, rate=0.000911, arf fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src22.arf
[Thu Jun 14 04:07:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:07:11 2012] Updating source flux to 3.2e-14
[Thu Jun 14 04:07:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting