[Wed Jun 13 03:38:02 2012] Detection parameters:
  Position = (282.8, 281.4) = 5 40 45.45 -1 56 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122325.9 +/- 432.4
  Background counts = 41.3
  Rate = 2 +/- 0.005

[Wed Jun 13 03:38:03 2012] Off-axis axis estimate = 1.68'
[Wed Jun 13 04:04:16 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 04:04:16 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jun 13 04:04:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.902
[Wed Jun 13 04:04:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Jun 13 07:40:04 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 07:40:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:40:04 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 07:40:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:40:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:40:06 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 07:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 13 07:40:06 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 13 07:40:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:21:27 2012] Spatial fit model total counts = 87676.500000, observed total counts = 107546.000000
[Wed Jun 13 12:21:27 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 12:21:28 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:21:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:21:28 2012] Assessing source extent using major
[Wed Jun 13 12:21:28 2012] Source does appear to be extended
[Wed Jun 13 12:21:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:26:32 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 12:26:32 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jun 13 12:26:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.902
[Wed Jun 13 12:26:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Wed Jun 13 16:59:40 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 16:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 16:59:40 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 16:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 16:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 13 16:59:41 2012] fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 16:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 13 16:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657200101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:25:21 2012] Spatial fit model total counts = 96339.700000, observed total counts = 107546.000000
[Wed Jun 13 20:25:21 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 20:25:21 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 20:25:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 20:25:21 2012] Assessing source extent using major
[Wed Jun 13 20:25:21 2012] Source does appear to be extended
[Wed Jun 13 20:25:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:26:08 2012] Counts = 122325.898438, rescaling region sizes by 3.000000
[Wed Jun 13 21:26:08 2012] XMMSAS src. selection expression = ellipse(24557.169861, 24429.059387, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed Jun 13 21:26:08 2012] Writing source region out to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 21:26:08 2012] Extracting stamp from image fullrun_mos1_xmm0657200101_pi300-10000_cl_sm2.00.img.gz, (170, 169) - (395, 394)
[Wed Jun 13 21:26:08 2012] XMMSAS bgd. selection expression = annulus(24557.169861, 24429.059387, 9787.500000, 19575.000000, X, Y) && !ellipse(8468.684000, 29599.634000, 1127.361632, 1127.361632, 0.000000, X, Y) && !ellipse(22013.735428, 16554.334091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8650.212000, 28046.576000, 305.757609, 305.757609, 0.000000, X, Y) && !ellipse(8392.558000, 27436.700000, 4273.488123, 1009.792029, 29.394000, X, Y) && !ellipse(9879.675400, 17973.297241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9121.408000, 27369.556000, 668.012819, 668.012819, 0.000000, X, Y) && !ellipse(16246.114395, 27971.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33531.251620, 32405.686200, 521.446415, 521.446415, 0.000000, X, Y) && !ellipse(9779.934000, 28281.836000, 874.152025, 874.152025, 0.000000, X, Y) && !ellipse(22911.582703, 8469.022491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7833.970680, 27867.436493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8522.984000, 20641.586000, 443.637613, 443.637613, 0.000000, X, Y) && !ellipse(12927.064926, 32666.093964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10389.758965, 22642.126434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14026.414322, 21371.096207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8915.877861, 26934.222900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9144.570801, 28926.939209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34213.887800, 15104.925400, 448.946413, 448.946413, 0.000000, X, Y) && !ellipse(25847.726501, 13416.892609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36448.538971, 16039.659317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10696.065712, 27424.896210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39763.571306, 24701.094879, 766.118645, 325.795749, 98.745117, X, Y) && !ellipse(10630.977200, 25781.476800, 412.736812, 412.736812, 0.000000, X, Y) && !ellipse(12151.453000, 26358.243200, 532.425615, 193.416006, 100.105100, X, Y) && !ellipse(12373.683807, 19787.559738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14840.451614, 32806.951233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11572.411600, 32112.925800, 338.899210, 338.899210, 0.000000, X, Y) && !ellipse(15157.274933, 16012.526245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21230.910660, 9414.676224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31745.486450, 26329.611664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13443.246000, 18073.068000, 995.472029, 995.472029, 0.000000, X, Y) && !ellipse(41193.835663, 22933.245087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9314.324081, 25072.837616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28967.412476, 15563.601944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9033.883293, 31341.144073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13010.720917, 16128.930695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16305.384800, 17598.601600, 2210.712064, 1050.752030, 8.912000, X, Y) && !ellipse(9868.378000, 25226.994200, 2136.744061, 2136.744061, 0.000000, X, Y) && !ellipse(9538.784800, 23548.680800, 1889.696054, 746.546421, 16.356200, X, Y) && !ellipse(13415.234543, 21293.493683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14052.097748, 24470.822998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8730.038422, 22193.301697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15400.802185, 24298.933746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9139.218262, 26427.653931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8530.472000, 23921.832000, 2636.240076, 2636.240076, 0.000000, X, Y) && !ellipse(33295.585480, 17120.685028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8869.000000, 18495.510971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11655.385544, 31487.221130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9323.513138, 16930.724319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14650.313019, 14558.239258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8885.454000, 25331.726000, 2194.360063, 2194.360063, 0.000000, X, Y) && !ellipse(16084.342133, 12847.775131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11454.758255, 16577.431519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11217.403082, 16608.097020, 2118.768061, 721.698293, 0.000000, X, Y)
[Wed Jun 13 21:26:08 2012] Writing fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 21:26:26 2012] Mean detx,y = (328.50, -222.04) 
[Wed Jun 13 21:26:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:32:21 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:32:21 2012] Setting source spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 21:32:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 21:55:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 21:55:28 2012] rmf not generated due to insufficient counts
[Thu Jun 14 04:07:09 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:07:09 2012] Error reading totcts from fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 04:07:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:07:10 2012] Using photon index=1.80, rate=1.54, arf fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 04:07:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:07:10 2012] Updating source flux to 1.8e-11
[Thu Jun 14 04:07:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 04:11:45 2012] xmm0657200101/analysis//spectral/fullrun_mos1_xmm0657200101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete