[Sun Aug  5 06:21:10 2012] Detection parameters:
  Position = (320.2, 309.0) = 15 55 38.50 11 10 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.1 +/- 17.4
  Background counts = 12.7
  Rate = 0.006 +/- 0.0009

[Sun Aug  5 06:21:10 2012] Off-axis axis estimate = 1.75'
[Sun Aug  5 07:19:33 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 07:19:33 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Aug  5 07:19:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.684
[Sun Aug  5 07:19:33 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.31"
[Sun Aug  5 08:24:44 2012] fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_src8.ximg exists
[Sun Aug  5 08:24:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_src8.csv
[Sun Aug  5 08:24:44 2012] fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Aug  5 08:24:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_src8.csv
[Sun Aug  5 08:24:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 08:24:45 2012] fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Aug  5 08:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Aug  5 08:24:45 2012] fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Aug  5 08:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Aug  5 08:24:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 08:24:57 2012] Spatial fit model total counts = 6397.240000, observed total counts = 6653.000000
[Sun Aug  5 08:24:57 2012] Offset between fit and detection position for source 23 = 3.413523 pixels
[Sun Aug  5 08:24:57 2012] Warning, changing simple spatial fit ID from 8 to 3
[Sun Aug  5 08:24:57 2012] 5639.669000 total counts/ 5523.420000 bgd. counts: snr = 1.564174
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 3.413523 pixels
  Position = (322.3, 311.7) = 15 55 37.87 11 10 45.4
  Extent = 14.8 (14.8-29.5)", rotation angle = 0
  Source counts = 116.2 +/- 75.1
  Background counts = 5523.4
  Rate = 0.005 +/- 0.003
  Deleting source due to low Poisson probability