[Sun Aug  5 06:20:50 2012] Detection parameters:
  Position = (335.3, 448.7) = 15 55 34.02 11 20 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.0 +/- 10.4
  Background counts = 11.1
  Rate = 0.003 +/- 0.0005

[Sun Aug  5 06:20:50 2012] Off-axis axis estimate = 11.22'
[Sun Aug  5 06:43:26 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 06:43:26 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Sun Aug  5 06:43:26 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.147
[Sun Aug  5 06:43:26 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.04"
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src10.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src10.csv
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src10.csv
[Sun Aug  5 07:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Aug  5 07:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 08:24:52 2012] Source 6 is offset by 6.146798 and -7.155071 pixels which is larger than
2 X fitted extent = 1.365062 x 1.365062, not incorporating fit results
[Sun Aug  5 08:24:52 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.253101 pixels away
[Sun Aug  5 08:24:52 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 08:24:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 08:24:52 2012] Assessing source extent using major
[Sun Aug  5 08:24:52 2012] Source does appear to be extended
[Sun Aug  5 08:24:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 08:24:52 2012] Deleting source due to low Poisson probability 0.9