[Sun Aug  5 06:20:50 2012] Detection parameters:
  Position = (429.3, 468.7) = 15 55 6.21 11 22 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.2 +/- 8.7
  Background counts = 10.9
  Rate = 0.002 +/- 0.0004

[Sun Aug  5 06:20:50 2012] Off-axis axis estimate = 15.57'
[Sun Aug  5 06:43:26 2012] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 06:43:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug  5 06:43:26 2012] Initial guess for spatial extent in simple fitting = 14.21"
[Sun Aug  5 06:43:26 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.863
[Sun Aug  5 06:43:26 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 14.21"
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src25.csv
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src25.csv
[Sun Aug  5 07:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Aug  5 07:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Aug  5 07:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 08:24:52 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.122890 pixels away
[Sun Aug  5 08:24:52 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 08:24:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 08:24:52 2012] Assessing source extent using major
[Sun Aug  5 08:24:52 2012] Source does appear to be extended
[Sun Aug  5 08:24:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 08:24:52 2012] Deleting source due to low Poisson probability 0.8