[Sun Aug  5 06:20:50 2012] Detection parameters:
  Position = (286.4, 325.1) = 15 55 48.50 11 11 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.2 +/- 14.6
  Background counts = 12.1
  Rate = 0.003 +/- 0.0007

[Sun Aug  5 06:20:50 2012] Off-axis axis estimate = 2.12'
[Sun Aug  5 06:43:26 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 06:43:26 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Sun Aug  5 06:43:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.013
[Sun Aug  5 06:43:26 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.49"
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Aug  5 07:19:33 2012] Fit fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_src12 appears to have run properly
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Aug  5 07:19:33 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Aug  5 07:19:33 2012] Fit fullrun_mos1_xmm0656990101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Aug  5 08:24:52 2012] Spatial fit model total counts = 920.300000, observed total counts = 916.000000
[Sun Aug  5 08:24:52 2012] Offset between fit and detection position for source 16 = 7.195472 pixels
[Sun Aug  5 08:24:52 2012] 944.686000 total counts/ 669.745000 bgd. counts: snr = 10.623919
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 7.195472 pixels
  Position = (292.9, 322.0) = 15 55 46.57 11 11 30.4
  Extent = 15.0 (14.9-30.0)", rotation angle = 0
  Source counts = 274.9 +/- 30.7
  Background counts = 669.7
  Rate = 0.01 +/- 0.001
[Sun Aug  5 08:24:52 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 08:24:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 08:24:52 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 08:24:52 2012] Source does appear to be extended
[Sun Aug  5 08:24:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 09:07:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 09:07:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug  5 09:07:30 2012] Initial guess for spatial extent in simple fitting = 14.98"
[Sun Aug  5 09:07:30 2012] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.029
[Sun Aug  5 09:07:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.98"
[Sun Aug  5 09:13:40 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_src4.ximg exists
[Sun Aug  5 09:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_src4.csv
[Sun Aug  5 09:13:40 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Aug  5 09:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_src4.csv
[Sun Aug  5 09:13:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 09:13:40 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Aug  5 09:13:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Aug  5 09:13:40 2012] fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Aug  5 09:13:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Aug  5 09:13:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656990101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 09:46:44 2012] Warning, spatial fit 4 centroid is now closest to src. 16
[Sun Aug  5 09:46:44 2012] Source 4 in spatial fitting is no longer close to this source
[Sun Aug  5 09:46:44 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 09:46:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 09:46:44 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 09:46:44 2012] Source does appear to be extended
[Sun Aug  5 09:46:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 11:43:25 2012] XMMSAS src. selection expression = ellipse(25432.590000, 27967.644000, 898.638026, 898.638026, 0.000000, X, Y)
[Sun Aug  5 11:43:25 2012] Writing source region out to fullrun_mos1_xmm0656990101_pi300-10000_pass1_cl_src16_src.reg
[Sun Aug  5 11:43:25 2012] Extracting stamp from image fullrun_mos1_xmm0656990101_pi300-10000_cl_sm2.00.img.gz, (241, 270) - (345, 374)
[Sun Aug  5 11:43:25 2012] XMMSAS bgd. selection expression = annulus(25432.590000, 27967.644000, 1497.730043, 2995.460086, X, Y) && !ellipse(26459.277000, 27834.552000, 1389.708040, 1389.708040, 0.000000, X, Y)
[Sun Aug  5 11:43:25 2012] Writing fullrun_mos1_xmm0656990101_pi300-10000_pass1_cl_src16.gif
[Sun Aug  5 11:46:30 2012] Mean detx,y = (411.13, -626.54) 
[Sun Aug  5 11:46:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 11:46:46 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 11:46:46 2012] Setting source spectrum file to fullrun_mos1_xmm0656990101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Aug  5 11:46:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0656990101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Aug  5 12:16:01 2012] Updating aperture counts using extracted products
[Sun Aug  5 12:16:01 2012] Error reading totcts from fullrun_mos1_xmm0656990101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Aug  5 12:16:01 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 12:16:01 2012] Using photon index=1.80, rate=0.0127, arf fullrun_mos1_xmm0656990101_pi300-10000_pass1_cl_src16.arf
[Sun Aug  5 12:16:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 12:16:01 2012] Updating source flux to 1.2e-13