[Sat Jun 22 12:25:59 2013] Detection parameters:
  Position = (261.5, 279.1) = 20 58 23.51 43 53 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.7 +/- 19.4
  Background counts = 13.5
  Rate = 0.01 +/- 0.001

[Sat Jun 22 12:26:00 2013] Off-axis axis estimate = 3.02'
[Sat Jun 22 13:42:51 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 13:42:51 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Jun 22 13:42:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.833
[Sat Jun 22 13:42:51 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.94"
[Sat Jun 22 14:16:17 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 22 14:16:17 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 22 14:16:17 2013] Fit fullrun_mos2_xmm0656781201_pi300-10000_cl_pass0_src3 appears to have run properly
[Sat Jun 22 14:16:18 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 22 14:16:18 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 22 14:16:18 2013] Fit fullrun_mos2_xmm0656781201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 22 14:16:33 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.079281 pixels away
[Sat Jun 22 14:16:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 14:16:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 14:16:33 2013] Assessing source extent using major
[Sat Jun 22 14:16:33 2013] Source does appear to be extended
[Sat Jun 22 14:16:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 15:29:51 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 15:29:51 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Jun 22 15:29:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.833
[Sat Jun 22 15:29:51 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.94"
[Sat Jun 22 15:53:52 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 22 15:53:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 22 15:53:53 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 22 15:53:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 22 15:53:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 15:53:58 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 22 15:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 22 15:53:58 2013] fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 22 15:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 22 15:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656781201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 15:54:35 2013] Source 2 is offset by 6.840509 and 6.434564 pixels which is larger than
2 X fitted extent = 0.912414 x 0.912414, not incorporating fit results
[Sat Jun 22 15:54:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 15:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 15:54:35 2013] Assessing source extent using major
[Sat Jun 22 15:54:35 2013] Source does appear to be extended
[Sat Jun 22 15:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 17:13:34 2013] XMMSAS src. selection expression = ellipse(22705.584290, 24236.267090, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 17:13:34 2013] Writing source region out to fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 22 17:13:34 2013] Extracting stamp from image fullrun_mos2_xmm0656781201_pi300-10000_cl_sm2.00.img.gz, (224, 242) - (299, 317)
[Sat Jun 22 17:13:34 2013] XMMSAS bgd. selection expression = annulus(22705.584290, 24236.267090, 1087.500000, 2175.000000, X, Y) && !ellipse(24290.385600, 24502.781600, 479.928814, 479.928814, 0.000000, X, Y) && !ellipse(23644.798248, 24859.046692, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 17:13:34 2013] Writing fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2.gif
[Sat Jun 22 17:14:17 2013] Mean detx,y = (-853.51, 1404.39) 
[Sat Jun 22 17:14:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 17:14:27 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 17:14:28 2013] Setting source spectrum file to fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 22 17:14:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 22 17:22:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 17:22:51 2013] rmf not generated due to insufficient counts
[Sat Jun 22 17:27:02 2013] Updating aperture counts using extracted products
[Sat Jun 22 17:27:02 2013] Total counts from fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 363.00
[Sat Jun 22 17:27:02 2013] Total counts from fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 620.00
[Sat Jun 22 17:27:02 2013] Got source and background scale factors 1133916.000000, 9163728.000000
[Sat Jun 22 17:27:02 2013] User source parameters:
  Position = (261.5, 279.1) = 20 58 23.51 43 53 6.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 286.3 +/- 20.1
  Background aperture counts = 76.7
  Rate = 0.01 +/- 0.0009

[Sat Jun 22 17:27:02 2013] Updating counts from extracted products
[Sat Jun 22 17:27:02 2013] Set source signif. to 286.28/8.76 = 32.68
[Sat Jun 22 17:27:05 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 17:27:05 2013] Using photon index=1.80, rate=0.0133, arf fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2.arf
[Sat Jun 22 17:27:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 17:27:05 2013] Updating source flux to 2.1e-13
[Sat Jun 22 17:27:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 17:27:19 2013] xmm0656781201/analysis//spectral/fullrun_mos2_xmm0656781201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete