[Sat Dec 17 02:17:10 2011] Detection parameters:
  Position = (303.4, 335.0) = 5 56 49.68 -33 9 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2698.4 +/- 72.3
  Background counts = 156.1
  Rate = 0.07 +/- 0.002

[Sat Dec 17 02:17:12 2011] Off-axis axis estimate = 2.67'
[Sat Dec 17 02:20:30 2011] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 02:20:30 2011] Initial guess for spatial extent in simple fitting = 7.76"
[Sat Dec 17 02:20:30 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.766
[Sat Dec 17 02:20:30 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.76"
[Sat Dec 17 07:32:10 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec 17 07:32:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src3.csv
[Sat Dec 17 07:32:10 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec 17 07:32:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src3.csv
[Sat Dec 17 07:32:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 07:32:12 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec 17 07:32:12 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec 17 07:32:12 2011] Fit fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Dec 17 07:56:41 2011] Source 3 is offset by -2.266211 and 6.113214 pixels which is larger than
2 X fitted extent = 4.179991 x 4.179991, not incorporating fit results
[Sat Dec 17 07:56:41 2011] Source 3 is offset by -0.328786 and 2.293651 pixels which is larger than
2 X fitted extent = 1.395890 x 1.395890, not incorporating fit results
[Sat Dec 17 07:56:41 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 07:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 07:56:41 2011] Assessing source extent using major
[Sat Dec 17 07:56:41 2011] Source does appear to be extended
[Sat Dec 17 07:56:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 07:56:41 2011] Source is confused with source 8
[Sat Dec 17 07:56:50 2011] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 07:56:50 2011] Initial guess for spatial extent in simple fitting = 7.76"
[Sat Dec 17 07:56:50 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.766
[Sat Dec 17 07:56:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.76"
[Sat Dec 17 14:34:27 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Dec 17 14:34:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src3.csv
[Sat Dec 17 14:34:27 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Dec 17 14:34:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src3.csv
[Sat Dec 17 14:34:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 14:34:29 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Dec 17 14:34:29 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Dec 17 14:34:29 2011] Fit fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Dec 17 15:01:20 2011] Source 3 is offset by -2.390763 and 6.113214 pixels which is larger than
2 X fitted extent = 4.154929 x 4.154929, not incorporating fit results
[Sat Dec 17 15:01:20 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 19.086810 pixels away
[Sat Dec 17 15:01:20 2011] Source 3 is offset by 8.116892 and 5.045145 pixels which is larger than
2 X fitted extent = 7.123632 x 7.123632, not incorporating fit results
[Sat Dec 17 15:01:20 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 15:01:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 15:01:20 2011] Assessing source extent using major
[Sat Dec 17 15:01:20 2011] Source does appear to be extended
[Sat Dec 17 15:01:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 15:01:29 2011] Counts = 2698.436768, rescaling region sizes by 2.000000
[Sat Dec 17 15:01:29 2011] XMMSAS src. selection expression = ellipse(26343.003632, 29094.155609, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Dec 17 15:01:29 2011] Writing source region out to fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src3_src.reg
[Sat Dec 17 15:01:29 2011] Extracting stamp from image fullrun_mos1_xmm0656781101_pi300-10000_cl_sm2.00.img.gz, (228, 260) - (378, 410)
[Sat Dec 17 15:01:29 2011] XMMSAS bgd. selection expression = annulus(26343.003632, 29094.155609, 4350.000000, 8700.000000, X, Y) && !ellipse(27175.407400, 27523.911800, 4534.440130, 4534.440130, 0.000000, X, Y) && !ellipse(27039.784210, 29009.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27624.734955, 29270.754883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.926117, 30036.823761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.184000, 29620.748000, 1247.096036, 1247.096036, 0.000000, X, Y) && !ellipse(26384.572000, 29491.034000, 1245.560036, 1245.560036, 0.000000, X, Y) && !ellipse(26949.730000, 29512.308000, 237.879207, 237.879207, 0.000000, X, Y) && !ellipse(25292.074000, 28968.614000, 593.828817, 593.828817, 0.000000, X, Y) && !ellipse(28846.024000, 29898.046000, 1688.320049, 1688.320049, 0.000000, X, Y) && !ellipse(30707.141663, 28579.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22543.682600, 27851.607200, 511.219215, 511.219215, 0.000000, X, Y) && !ellipse(23464.094000, 27768.906000, 637.598418, 637.598418, 0.000000, X, Y) && !ellipse(22985.126800, 27869.682000, 683.443220, 683.443220, 0.000000, X, Y) && !ellipse(21081.979446, 27968.624969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.406000, 28081.982000, 1276.960037, 1276.960037, 0.000000, X, Y) && !ellipse(31061.861800, 27731.433600, 253.128007, 253.128007, 0.000000, X, Y) && !ellipse(32125.494000, 27067.026000, 1414.984041, 1414.984041, 0.000000, X, Y) && !ellipse(31554.504883, 27256.344330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30558.159400, 26803.112000, 1329.224038, 1329.224038, 0.000000, X, Y) && !ellipse(32891.808200, 27087.249400, 1502.032043, 463.427213, 7.933000, X, Y) && !ellipse(29605.094757, 25442.922150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.713000, 34364.123000, 1189.376034, 1189.376034, 0.000000, X, Y) && !ellipse(27651.439200, 33342.360000, 912.056026, 912.056026, 0.000000, X, Y) && !ellipse(27535.779700, 32207.381200, 861.408025, 861.408025, 0.000000, X, Y) && !ellipse(27453.941400, 31832.638000, 703.584820, 703.584820, 0.000000, X, Y) && !ellipse(27527.728149, 30653.565826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28530.081360, 30388.774445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29951.846000, 30798.550000, 1417.792041, 1417.792041, 0.000000, X, Y) && !ellipse(30321.624000, 30470.527000, 1454.528042, 1454.528042, 0.000000, X, Y) && !ellipse(31149.072000, 29481.964400, 1432.040041, 1432.040041, 0.000000, X, Y) && !ellipse(30230.774000, 29300.050000, 1432.040041, 1432.040041, 0.000000, X, Y) && !ellipse(22485.745209, 27371.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30324.084600, 25190.296400, 1318.080038, 542.439216, 30.886000, X, Y) && !ellipse(23800.380000, 23515.502000, 1196.240034, 1196.240034, 0.000000, X, Y) && !ellipse(26845.445400, 23336.938000, 1245.024036, 1245.024036, 0.000000, X, Y) && !ellipse(27577.440918, 22502.655090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26650.384000, 21169.143800, 1347.984039, 1347.984039, 0.000000, X, Y)
[Sat Dec 17 15:01:29 2011] Writing fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src3.gif
[Sat Dec 17 15:10:48 2011] Mean detx,y = (1143.27, -762.12) 
[Sat Dec 17 15:10:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 15:13:24 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 15:13:24 2011] Setting source spectrum file to fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 17 15:13:24 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Dec 17 16:29:35 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 16:29:35 2011] rmf not generated due to insufficient counts
[Sat Dec 17 18:51:05 2011] Updating aperture counts using extracted products
[Sat Dec 17 18:51:05 2011] Error reading totcts from fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 17 18:51:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 18:51:06 2011] Using photon index=1.80, rate=0.0695, arf fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src3.arf
[Sat Dec 17 18:51:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 18:51:06 2011] Updating source flux to 6.6e-13
[Sat Dec 17 18:51:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting