[Sat Dec 17 02:17:10 2011] Detection parameters:
  Position = (184.1, 199.0) = 5 57 31.07 -33 18 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 860.4 +/- 38.0
  Background counts = 48.9
  Rate = 0.02 +/- 0.0009

[Sat Dec 17 02:17:12 2011] Off-axis axis estimate = 10.99'
[Sat Dec 17 02:20:30 2011] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 02:20:30 2011] Initial guess for spatial extent in simple fitting = 11.92"
[Sat Dec 17 02:20:30 2011] source mask rpix=2.7, npix_max = 42, mask sum = 35, frac = 0.833
[Sat Dec 17 02:20:30 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 11.92"
[Sat Dec 17 07:32:11 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src26.ximg exists
[Sat Dec 17 07:32:11 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Dec 17 07:32:11 2011] Fit fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_src26 appears to have run properly
[Sat Dec 17 07:32:12 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Dec 17 07:32:12 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Dec 17 07:32:12 2011] Fit fullrun_mos1_xmm0656781101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Dec 17 07:56:41 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.487675 pixels away
[Sat Dec 17 07:56:41 2011] Spatial fit model total counts = 641.416000, observed total counts = 638.000000
[Sat Dec 17 07:56:41 2011] Offset between fit and detection position for source 26 = 0.610849 pixels
[Sat Dec 17 07:56:41 2011] Warning, changing simple spatial fit ID from 26 to 28
[Sat Dec 17 07:56:41 2011] 639.461000 total counts/ 408.401000 bgd. counts: snr = 11.433557
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.610849 pixels
  Position = (184.7, 198.9) = 5 57 30.87 -33 19 1.4
  Extent = 7.8 (6.2-10.2)" x 4.1 (3.4-5.4)", rotation angle = 58 (48-74) degrees
  Source counts = 231.1 +/- 25.3
  Background counts = 408.4
  Rate = 0.006 +/- 0.0007
[Sat Dec 17 07:56:41 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 07:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 07:56:41 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 07:56:41 2011] Source does appear to be extended
[Sat Dec 17 07:56:41 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Sat Dec 17 07:56:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 07:56:50 2011] Initial guess for spatial extent in simple fitting = 5.98"
[Sat Dec 17 07:56:50 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.137
[Sat Dec 17 07:56:50 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 5.98"
[Sat Dec 17 14:34:28 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src24.ximg exists
[Sat Dec 17 14:34:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src24.csv
[Sat Dec 17 14:34:28 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Dec 17 14:34:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src24.csv
[Sat Dec 17 14:34:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 14:34:29 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Dec 17 14:34:29 2011] fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Dec 17 14:34:29 2011] Fit fullrun_mos1_xmm0656781101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sat Dec 17 15:01:20 2011] Warning, spatial fit 24 centroid is now closest to src. 28
[Sat Dec 17 15:01:20 2011] Spatial fit model total counts = 640.868000, observed total counts = 638.000000
[Sat Dec 17 15:01:20 2011] Offset between fit and detection position for source 26 = 0.643361 pixels
[Sat Dec 17 15:01:20 2011] Warning, changing simple spatial fit ID from 24 to 25
[Sat Dec 17 15:01:20 2011] 638.075000 total counts/ 404.180000 bgd. counts: snr = 11.634120
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.643361 pixels
  Position = (184.3, 198.3) = 5 57 30.99 -33 19 3.7
  Extent = 6.2 (5.5-7.1)", rotation angle = 0
  Source counts = 233.9 +/- 25.3
  Background counts = 404.2
  Rate = 0.006 +/- 0.0007
[Sat Dec 17 15:01:20 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 15:01:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 15:01:20 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 15:01:20 2011] Source does appear to be extended
[Sat Dec 17 15:01:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 15:01:30 2011] XMMSAS src. selection expression = ellipse(15986.212000, 17207.070000, 373.765211, 373.765211, 0.000000, X, Y)
[Sat Dec 17 15:01:30 2011] Writing source region out to fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src26_src.reg
[Sat Dec 17 15:01:30 2011] Extracting stamp from image fullrun_mos1_xmm0656781101_pi300-10000_cl_sm2.00.img.gz, (163, 177) - (206, 220)
[Sat Dec 17 15:01:30 2011] XMMSAS bgd. selection expression = annulus(15986.212000, 17207.070000, 622.942018, 1245.884036, X, Y)
[Sat Dec 17 15:01:30 2011] Writing fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src26.gif
[Sat Dec 17 15:29:28 2011] Mean detx,y = (-10786.47, -10592.18) 
[Sat Dec 17 15:29:29 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 15:29:36 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 15:29:36 2011] Setting source spectrum file to fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Dec 17 15:29:36 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Dec 17 18:51:05 2011] Updating aperture counts using extracted products
[Sat Dec 17 18:51:05 2011] Error reading totcts from fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Dec 17 18:51:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 18:51:06 2011] Using photon index=1.80, rate=0.00649, arf fullrun_mos1_xmm0656781101_pi300-10000_pass1_cl_src26.arf
[Sat Dec 17 18:51:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 18:51:06 2011] Updating source flux to 2.1e-13