[Thu Feb 23 15:03:40 2012] Detection parameters:
  Position = (389.1, 443.1) = 5 56 22.04 -33 0 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.3 +/- 23.8
  Background counts = 34.2
  Rate = 0.008 +/- 0.0006

[Thu Feb 23 15:03:42 2012] Off-axis axis estimate = 12.38'
[Fri Feb 24 09:54:37 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 09:54:37 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Fri Feb 24 09:54:37 2012] source mask rpix=2.9, npix_max = 46, mask sum = 46, frac = 0.994
[Fri Feb 24 09:54:37 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.62"
[Fri Feb 24 14:31:07 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_src10.ximg exists
[Fri Feb 24 14:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_src10.csv
[Fri Feb 24 14:31:07 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Feb 24 14:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_src10.csv
[Fri Feb 24 14:31:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 14:31:08 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Feb 24 14:31:08 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Feb 24 14:31:08 2012] Fit fullrun_mos2_xmm0656781001_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Feb 24 14:32:01 2012] Warning, spatial fit 10 centroid is now closest to src. 3
[Fri Feb 24 14:32:01 2012] Spatial fit model total counts = 1329.910000, observed total counts = 1353.000000
[Fri Feb 24 14:32:01 2012] Offset between fit and detection position for source 5 = 1.818979 pixels
[Fri Feb 24 14:32:01 2012] Warning, changing simple spatial fit ID from 10 to 13
[Fri Feb 24 14:32:01 2012] 1448.784000 total counts/ 240.864000 bgd. counts: snr = 77.830931
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.818979 pixels
  Position = (387.4, 442.4) = 5 56 22.62 -33 0 54.0
  Extent = 26.6" x 21.2", rotation angle = 337
  Source counts = 1207.9 +/- 38.1
  Background counts = 240.9
  Rate = 0.03 +/- 0.0009
[Fri Feb 24 14:32:01 2012] Spatial fit model total counts = 1193.810000, observed total counts = 1191.000000
[Fri Feb 24 14:32:01 2012] Offset between fit and detection position for source 5 = 1.654723 pixels
[Fri Feb 24 14:32:01 2012] Warning, changing simple spatial fit ID from 13 to 17
[Fri Feb 24 14:32:01 2012] 1113.817000 total counts/ 474.398000 bgd. counts: snr = 29.357165
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.654723 pixels
  Position = (388.8, 443.3) = 5 56 22.14 -33 0 50.1
  Extent = 16.4 (13.3-18.9)", rotation angle = 0
  Source counts = 639.4 +/- 33.4
  Background counts = 474.4
  Rate = 0.02 +/- 0.0008
[Fri Feb 24 14:32:01 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:32:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:32:01 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 14:32:01 2012] Source does appear to be extended
[Fri Feb 24 14:32:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 14:32:02 2012] Source is confused with source 3
[Sat Feb 25 02:17:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 02:17:13 2012] Initial guess for spatial extent in simple fitting = 16.40"
[Sat Feb 25 02:17:13 2012] source mask rpix=3.8, npix_max = 72, mask sum = 68, frac = 0.932
[Sat Feb 25 02:17:13 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 16.40"
[Sat Feb 25 07:19:09 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass1_src10.ximg exists
[Sat Feb 25 07:19:09 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Feb 25 07:19:09 2012] Fit fullrun_mos2_xmm0656781001_pi300-10000_cl_pass1_src10 appears to have run properly
[Sat Feb 25 07:19:10 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Feb 25 07:19:10 2012] fullrun_mos2_xmm0656781001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Feb 25 07:19:10 2012] Fit fullrun_mos2_xmm0656781001_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Feb 25 07:19:53 2012] Source 5 is offset by 2.322943 and 0.622483 pixels which is larger than
2 X fitted extent = 1.398814 x 1.398814, not incorporating fit results
[Sat Feb 25 07:19:53 2012] Warning, spatial fit 10 centroid is now closest to src. 13
[Sat Feb 25 07:19:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 07:19:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 07:19:53 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 07:19:53 2012] Source does appear to be extended
[Sat Feb 25 07:19:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:04:13 2012] XMMSAS src. selection expression = ellipse(33779.904000, 38516.408000, 984.018028, 984.018028, 0.000000, X, Y)
[Sun Feb 26 05:04:13 2012] Writing source region out to fullrun_mos2_xmm0656781001_pi300-10000_pass1_cl_src5_src.reg
[Sun Feb 26 05:04:13 2012] Extracting stamp from image fullrun_mos2_xmm0656781001_pi300-10000_cl_sm2.00.img.gz, (332, 387) - (445, 500)
[Sun Feb 26 05:04:13 2012] XMMSAS bgd. selection expression = annulus(33779.904000, 38516.408000, 1640.030047, 3280.060094, X, Y) && !ellipse(31843.439400, 34777.246000, 1377.040040, 1377.040040, 0.000000, X, Y) && !ellipse(31549.456000, 34381.760000, 1348.248039, 1348.248039, 0.000000, X, Y) && !ellipse(31103.842000, 33779.300000, 1655.136048, 1655.136048, 0.000000, X, Y) && !ellipse(32702.972321, 36314.367065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31925.238000, 35156.306000, 1806.320052, 1806.320052, 0.000000, X, Y) && !ellipse(33302.857605, 37431.574188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34076.000000, 39002.446000, 1255.032036, 1255.032036, 0.000000, X, Y) && !ellipse(34552.268000, 39904.914000, 2064.528059, 2064.528059, 0.000000, X, Y) && !ellipse(33941.868000, 38864.460000, 822.080024, 822.080024, 0.000000, X, Y) && !ellipse(34396.112400, 39691.578000, 4129.056119, 516.132015, 117.813000, X, Y) && !ellipse(32157.644000, 35517.208000, 1263.592036, 1263.592036, 0.000000, X, Y) && !ellipse(33700.792000, 38255.410000, 3620.912104, 3620.912104, 0.000000, X, Y) && !ellipse(32902.062000, 36813.360000, 1850.776053, 1850.776053, 0.000000, X, Y) && !ellipse(35262.518799, 41352.675446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31282.230000, 34192.404000, 2798.864081, 2798.864081, 0.000000, X, Y) && !ellipse(36692.899902, 36311.677521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33571.692596, 39924.835205, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 05:04:13 2012] Writing fullrun_mos2_xmm0656781001_pi300-10000_pass1_cl_src5.gif
[Sun Feb 26 05:15:58 2012] Mean detx,y = (185.18, 13232.59) 
[Sun Feb 26 05:16:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 05:16:34 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 05:16:35 2012] Setting source spectrum file to fullrun_mos2_xmm0656781001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Feb 26 05:16:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0656781001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Feb 26 08:49:25 2012] Updating aperture counts using extracted products
[Sun Feb 26 08:49:25 2012] Error reading totcts from fullrun_mos2_xmm0656781001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Feb 26 08:49:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 08:49:27 2012] Using photon index=1.80, rate=0.0156, arf fullrun_mos2_xmm0656781001_pi300-10000_pass1_cl_src5.arf
[Sun Feb 26 08:49:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 08:49:27 2012] Updating source flux to 8.1e-12
[Sun Feb 26 08:59:49 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Sun Feb 26 08:59:49 2012] Flag c found in src. 5 procflags, skipping spectral fitting