[Mon Jun  3 16:48:26 2013] Detection parameters:
  Position = (372.9, 386.8) = 0 47 35.88 -72 45 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.6 +/- 6.6
  Background counts = 1.9
  Rate = 0.004 +/- 0.001

[Mon Jun  3 16:48:26 2013] Off-axis axis estimate = 8.38'
[Mon Jun  3 17:00:02 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 17:00:02 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Mon Jun  3 17:00:02 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.867
[Mon Jun  3 17:00:02 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.62"
[Mon Jun  3 17:08:09 2013] fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun  3 17:08:09 2013] fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun  3 17:08:09 2013] Fit fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_src4 appears to have run properly
[Mon Jun  3 17:08:09 2013] fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun  3 17:08:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun  3 17:08:09 2013] fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun  3 17:08:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun  3 17:08:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656780301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 17:18:59 2013] Spatial fit model total counts = 35.190200, observed total counts = 35.000000
[Mon Jun  3 17:18:59 2013] Offset between fit and detection position for source 3 = 0.786601 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.786601 pixels
  Position = (372.1, 386.6) = 0 47 36.64 -72 45 34.5
  Extent = 12.0 (8.6-15.4)" x 8.1 (4.4-11.3)", rotation angle = 15
  Source counts = 37.2 +/- 6.1
  Background counts = 0.0
  Rate = 0.005 +/- 0.0009
 Deleting source due to low signal-to-noise ratio