[Thu Mar 22 16:03:42 2012] Detection parameters:
  Position = (254.2, 373.3) = 11 33 26.56 -9 23 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.3 +/- 16.7
  Background counts = 42.7
  Rate = 0.01 +/- 0.001

[Thu Mar 22 16:03:43 2012] Off-axis axis estimate = 6.31'
[Thu Mar 22 16:25:39 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 16:25:39 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Thu Mar 22 16:25:39 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.958
[Thu Mar 22 16:25:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.58"
[Thu Mar 22 16:40:33 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 22 16:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_src3.csv
[Thu Mar 22 16:40:33 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 22 16:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_src3.csv
[Thu Mar 22 16:40:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 16:40:33 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 22 16:40:33 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 22 16:40:33 2012] Fit fullrun_mos1_xmm0656202601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Mar 22 16:56:14 2012] Spatial fit model total counts = 446.654000, observed total counts = 425.000000
[Thu Mar 22 16:56:14 2012] Offset between fit and detection position for source 7 = 0.082802 pixels
[Thu Mar 22 16:56:14 2012] 443.294200 total counts/ 349.295000 bgd. counts: snr = 5.029537
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.082802 pixels
  Position = (254.3, 373.3) = 11 33 26.54 -9 23 53.8
  Extent = 4.8 (3.6-5.9)", rotation angle = 0
  Source counts = 94.0 +/- 21.1
  Background counts = 349.3
  Rate = 0.007 +/- 0.001
[Thu Mar 22 16:56:14 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 16:56:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 16:56:14 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 16:56:14 2012] Source does appear to be extended
[Thu Mar 22 16:56:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 17:14:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 17:14:25 2012] Initial guess for spatial extent in simple fitting = 4.77"
[Thu Mar 22 17:14:25 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.882
[Thu Mar 22 17:14:25 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.77"
[Thu Mar 22 17:28:10 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 22 17:28:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_src3.csv
[Thu Mar 22 17:28:10 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 22 17:28:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_src3.csv
[Thu Mar 22 17:28:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 17:28:10 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 22 17:28:10 2012] fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 22 17:28:10 2012] Fit fullrun_mos1_xmm0656202601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar 22 17:40:38 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Thu Mar 22 17:40:38 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 17:40:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 17:40:38 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 17:40:38 2012] Source does appear to be extended
[Thu Mar 22 17:40:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 18:00:02 2012] XMMSAS src. selection expression = ellipse(22073.913000, 32429.993000, 286.329759, 286.329759, 0.000000, X, Y)
[Thu Mar 22 18:00:02 2012] Writing source region out to fullrun_mos1_xmm0656202601_pi300-10000_pass1_cl_src7_src.reg
[Thu Mar 22 18:00:02 2012] Extracting stamp from image fullrun_mos1_xmm0656202601_pi300-10000_cl_sm2.00.img.gz, (238, 357) - (271, 390)
[Thu Mar 22 18:00:02 2012] XMMSAS bgd. selection expression = annulus(22073.913000, 32429.993000, 477.216265, 954.432530, X, Y)
[Thu Mar 22 18:00:02 2012] Writing fullrun_mos1_xmm0656202601_pi300-10000_pass1_cl_src7.gif
[Thu Mar 22 18:00:51 2012] Mean detx,y = (6134.40, -1884.07) 
[Thu Mar 22 18:00:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 18:01:24 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 18:01:24 2012] Setting source spectrum file to fullrun_mos1_xmm0656202601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Mar 22 18:01:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0656202601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Mar 22 18:08:51 2012] Not generating rmf since there are only 93 counts
[Thu Mar 22 18:08:51 2012] rmf not generated due to insufficient counts
[Thu Mar 22 18:13:48 2012] Updating aperture counts using extracted products
[Thu Mar 22 18:13:48 2012] Error reading totcts from fullrun_mos1_xmm0656202601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Mar 22 18:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 18:13:48 2012] Using photon index=1.80, rate=0.00662, arf fullrun_mos1_xmm0656202601_pi300-10000_pass1_cl_src7.arf
[Thu Mar 22 18:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 18:13:48 2012] Updating source flux to 1.1e-13
[Thu Mar 22 18:13:50 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting