[Fri Nov 25 22:25:38 2011] Detection parameters:
  Position = (299.3, 314.0) = 17 2 22.47 -0 59 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.9 +/- 13.5
  Background counts = 19.4
  Rate = 0.008 +/- 0.001

[Fri Nov 25 22:25:39 2011] Off-axis axis estimate = 1.13'
[Sat Nov 26 01:16:24 2011] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:16:24 2011] Initial guess for spatial extent in simple fitting = 6.99"
[Sat Nov 26 01:16:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Sat Nov 26 01:16:24 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 6.99"
[Sat Nov 26 02:51:16 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_src8.ximg exists
[Sat Nov 26 02:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_src8.csv
[Sat Nov 26 02:51:16 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Nov 26 02:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_src8.csv
[Sat Nov 26 02:51:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 02:51:16 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Nov 26 02:51:16 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Nov 26 02:51:16 2011] Fit fullrun_mos2_xmm0656202201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Nov 26 02:51:41 2011] Spatial fit model total counts = 515.260000, observed total counts = 516.000000
[Sat Nov 26 02:51:41 2011] Offset between fit and detection position for source 8 = 1.103295 pixels
[Sat Nov 26 02:51:41 2011] 500.628500 total counts/ 445.430000 bgd. counts: snr = 2.615397
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.103295 pixels
  Position = (298.8, 315.0) = 17 2 22.62 -0 59 14.2
  Extent = 12.4 (9.3-14.0)", rotation angle = 0
  Source counts = 55.2 +/- 22.4
  Background counts = 445.4
  Rate = 0.005 +/- 0.002
[Sat Nov 26 02:51:41 2011] Spatial fit model total counts = 498.228000, observed total counts = 493.000000
[Sat Nov 26 02:51:41 2011] Offset between fit and detection position for source 8 = 1.021008 pixels
[Sat Nov 26 02:51:41 2011] Warning, changing simple spatial fit ID from 8 to 13
[Sat Nov 26 02:51:41 2011] 488.895900 total counts/ 400.344000 bgd. counts: snr = 4.425692
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.021008 pixels
  Position = (298.1, 314.2) = 17 2 22.81 -0 59 17.7
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source counts = 88.6 +/- 22.1
  Background counts = 400.3
  Rate = 0.008 +/- 0.002
[Sat Nov 26 02:51:41 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 02:51:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 02:51:41 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 02:51:41 2011] Source does appear to be extended
[Sat Nov 26 02:51:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 02:51:41 2011] Source is confused with source 15
[Sat Nov 26 02:51:41 2011] Source is confused with source 13
[Sat Nov 26 06:20:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 06:20:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 06:20:08 2011] Initial guess for spatial extent in simple fitting = 14.34"
[Sat Nov 26 06:20:08 2011] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.110
[Sat Nov 26 06:20:08 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 14.34"
[Sat Nov 26 07:38:04 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_src7.ximg exists
[Sat Nov 26 07:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_src7.csv
[Sat Nov 26 07:38:04 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Nov 26 07:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_src7.csv
[Sat Nov 26 07:38:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 07:38:05 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Nov 26 07:38:05 2011] fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Nov 26 07:38:05 2011] Fit fullrun_mos2_xmm0656202201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Nov 26 07:38:25 2011] Warning, spatial fit 7 centroid is now closest to src. 6
[Sat Nov 26 07:38:25 2011] Spatial fit model total counts = 493.734000, observed total counts = 493.000000
[Sat Nov 26 07:38:25 2011] Offset between fit and detection position for source 8 = 0.500166 pixels
[Sat Nov 26 07:38:25 2011] Warning, changing simple spatial fit ID from 7 to 11
[Sat Nov 26 07:38:25 2011] 475.222700 total counts/ 387.945000 bgd. counts: snr = 4.431168
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.500166 pixels
  Position = (297.9, 313.7) = 17 2 22.87 -0 59 19.7
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source counts = 87.3 +/- 21.8
  Background counts = 387.9
  Rate = 0.008 +/- 0.002
[Sat Nov 26 07:38:25 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 07:38:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 07:38:25 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 07:38:25 2011] Source does appear to be extended
[Sat Nov 26 07:38:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 09:09:01 2011] XMMSAS src. selection expression = ellipse(25871.788600, 27244.154000, 860.484025, 860.484025, 0.000000, X, Y)
[Sat Nov 26 09:09:01 2011] Writing source region out to fullrun_mos2_xmm0656202201_pi300-10000_pass1_cl_src8_src.reg
[Sat Nov 26 09:09:01 2011] Extracting stamp from image fullrun_mos2_xmm0656202201_pi300-10000_cl_sm2.00.img.gz, (248, 264) - (347, 363)
[Sat Nov 26 09:09:01 2011] XMMSAS bgd. selection expression = annulus(25871.788600, 27244.154000, 1434.140041, 2868.280083, X, Y) && !ellipse(26974.128400, 28067.151200, 845.432024, 845.432024, 0.000000, X, Y) && !ellipse(26284.107117, 28643.982117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.069061, 27029.827850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.993400, 28681.236200, 1208.296035, 1208.296035, 0.000000, X, Y) && !ellipse(26110.452271, 27685.882935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.830383, 28059.408386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26351.274048, 25619.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.513763, 24918.999908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27962.393400, 27826.206000, 1211.680035, 786.576023, 256.236000, X, Y) && !ellipse(27142.620000, 27356.762000, 1129.984033, 709.887220, 275.658000, X, Y)
[Sat Nov 26 09:09:01 2011] Writing fullrun_mos2_xmm0656202201_pi300-10000_pass1_cl_src8.gif
[Sat Nov 26 09:11:15 2011] Mean detx,y = (1116.27, -305.05) 
[Sat Nov 26 09:11:18 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 09:11:34 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 09:11:34 2011] Setting source spectrum file to fullrun_mos2_xmm0656202201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Nov 26 09:11:34 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656202201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Nov 26 09:16:45 2011] Not generating rmf since there are only 87 counts
[Sat Nov 26 09:16:45 2011] rmf not generated due to insufficient counts
[Sat Nov 26 09:25:54 2011] Updating aperture counts using extracted products
[Sat Nov 26 09:25:54 2011] Error reading totcts from fullrun_mos2_xmm0656202201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Nov 26 09:25:55 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 09:25:55 2011] Using photon index=1.80, rate=0.00808, arf fullrun_mos2_xmm0656202201_pi300-10000_pass1_cl_src8.arf
[Sat Nov 26 09:25:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 09:25:55 2011] Updating source flux to 8.1e-14
[Sat Nov 26 09:26:11 2011] Flag c found in src. 8 procflags, skipping spectral fitting
[Sat Nov 26 09:26:11 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Nov 26 09:26:29 2011] xmm0656202201/analysis//spectral/fullrun_mos2_xmm0656202201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete