[Mon Dec 19 02:11:16 2011] Detection parameters:
  Position = (299.6, 315.0) = 5 42 51.95 -35 58 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.0 +/- 10.0
  Background counts = 16.7
  Rate = 0.005 +/- 0.001

[Mon Dec 19 02:11:17 2011] Off-axis axis estimate = 1.20'
[Mon Dec 19 02:13:46 2011] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 02:13:46 2011] Initial guess for spatial extent in simple fitting = 7.03"
[Mon Dec 19 02:13:46 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.116
[Mon Dec 19 02:13:46 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 7.03"
[Mon Dec 19 03:05:48 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_src19.ximg exists
[Mon Dec 19 03:05:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_src19.csv
[Mon Dec 19 03:05:48 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Dec 19 03:05:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_src19.csv
[Mon Dec 19 03:05:48 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 03:05:49 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Dec 19 03:05:49 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Dec 19 03:05:49 2011] Fit fullrun_pn_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Dec 19 04:57:20 2011] Source 19 is offset by 6.647470 and 1.486283 pixels which is larger than
2 X fitted extent = 6.465058 x 6.465058, not incorporating fit results
[Mon Dec 19 04:57:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 04:57:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 04:57:20 2011] Assessing source extent using major
[Mon Dec 19 04:57:20 2011] Source does appear to be extended
[Mon Dec 19 04:57:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 04:57:37 2011] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 04:57:37 2011] Initial guess for spatial extent in simple fitting = 7.03"
[Mon Dec 19 04:57:37 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.116
[Mon Dec 19 04:57:37 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 7.03"
[Mon Dec 19 05:40:20 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_src17.ximg exists
[Mon Dec 19 05:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_src17.csv
[Mon Dec 19 05:40:20 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Dec 19 05:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_src17.csv
[Mon Dec 19 05:40:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 05:40:20 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Dec 19 05:40:20 2011] fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Dec 19 05:40:20 2011] Fit fullrun_pn_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Dec 19 07:21:07 2011] Spatial fit model total counts = 419.539000, observed total counts = 420.000000
[Mon Dec 19 07:21:07 2011] Offset between fit and detection position for source 19 = 5.465015 pixels
[Mon Dec 19 07:21:07 2011] 368.659100 total counts/ 309.071000 bgd. counts: snr = 3.389459
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.465015 pixels
  Position = (301.5, 320.1) = 5 42 51.25 -35 58 31.9
  Extent = 14.1 (14.0-28.1)", rotation angle = 0
  Source counts = 59.6 +/- 19.2
  Background counts = 309.1
  Rate = 0.006 +/- 0.002
[Mon Dec 19 07:21:07 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 07:21:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 07:21:07 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 07:21:07 2011] Source does appear to be extended
[Mon Dec 19 07:21:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 07:21:24 2011] XMMSAS src. selection expression = ellipse(26182.004000, 27801.734000, 843.690024, 843.690024, 0.000000, X, Y)
[Mon Dec 19 07:21:24 2011] Writing source region out to fullrun_pn_xmm0656202001_pi300-10000_pass1_cl_src19_src.reg
[Mon Dec 19 07:21:24 2011] Extracting stamp from image fullrun_pn_xmm0656202001_pi300-10000_cl_sm2.00.img.gz, (253, 272) - (350, 369)
[Mon Dec 19 07:21:24 2011] XMMSAS bgd. selection expression = annulus(26182.004000, 27801.734000, 1406.150040, 2812.300081, X, Y) && !ellipse(24810.589800, 26241.242600, 1109.264032, 1109.264032, 0.000000, X, Y) && !ellipse(23068.017029, 28224.872467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.794000, 27044.980000, 1092.584031, 1092.584031, 0.000000, X, Y) && !ellipse(23953.768000, 25939.718000, 1189.576034, 1189.576034, 0.000000, X, Y) && !ellipse(25873.735168, 25451.553650, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 07:21:24 2011] Writing fullrun_pn_xmm0656202001_pi300-10000_pass1_cl_src19.gif
[Mon Dec 19 07:28:24 2011] Mean detx,y = (-749.93, 3186.82) 
[Mon Dec 19 07:28:25 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 07:28:34 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 07:28:35 2011] Setting source spectrum file to fullrun_pn_xmm0656202001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Dec 19 07:28:35 2011] Setting bgd. spectrum file to fullrun_pn_xmm0656202001_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Dec 19 07:44:50 2011] Not generating rmf since there are only 59 counts
[Mon Dec 19 07:44:50 2011] rmf not generated due to insufficient counts
[Mon Dec 19 08:34:01 2011] Updating aperture counts using extracted products
[Mon Dec 19 08:34:01 2011] Error reading totcts from fullrun_pn_xmm0656202001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Dec 19 08:34:01 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 08:34:01 2011] Using photon index=1.80, rate=0.00594, arf fullrun_pn_xmm0656202001_pi300-10000_pass1_cl_src19.arf
[Mon Dec 19 08:34:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 08:34:01 2011] Updating source flux to 1.6e-14
[Mon Dec 19 08:34:40 2011] Flag b found in src. 19 procflags, skipping spectral fitting
[Mon Dec 19 08:34:40 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting