[Mon Dec 19 02:12:27 2011] Detection parameters:
  Position = (298.0, 300.0) = 5 42 52.51 -35 59 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.5 +/- 12.1
  Background counts = 8.2
  Rate = 0.006 +/- 0.0009

[Mon Dec 19 02:12:28 2011] Off-axis axis estimate = 0.12'
[Mon Dec 19 04:10:23 2011] Using EEF radius (= 6.49 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 04:10:23 2011] Initial guess for spatial extent in simple fitting = 6.49"
[Mon Dec 19 04:10:23 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009
[Mon Dec 19 04:10:23 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 6.49"
[Mon Dec 19 04:57:13 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src6.ximg exists
[Mon Dec 19 04:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src6.csv
[Mon Dec 19 04:57:13 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Dec 19 04:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src6.csv
[Mon Dec 19 04:57:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 04:57:14 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Dec 19 04:57:14 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Dec 19 04:57:14 2011] Fit fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Dec 19 04:57:29 2011] Spatial fit model total counts = 485.126000, observed total counts = 483.000000
[Mon Dec 19 04:57:29 2011] Offset between fit and detection position for source 21 = 6.127622 pixels
[Mon Dec 19 04:57:29 2011] 458.866000 total counts/ 366.126000 bgd. counts: snr = 4.846763
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 6.127622 pixels
  Position = (292.0, 298.5) = 5 42 54.65 -36 0 5.9
  Extent = 13.0 (10.4-26.0)", rotation angle = 0
  Source counts = 92.7 +/- 21.4
  Background counts = 366.1
  Rate = 0.007 +/- 0.002
[Mon Dec 19 04:57:29 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 04:57:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 04:57:29 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 04:57:29 2011] Source does appear to be extended
[Mon Dec 19 04:57:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 04:57:29 2011] Source is confused with source 1
[Mon Dec 19 06:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 06:34:43 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Mon Dec 19 06:34:43 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.010
[Mon Dec 19 06:34:43 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 12.98"
[Mon Dec 19 07:21:00 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src5.ximg exists
[Mon Dec 19 07:21:00 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 07:21:00 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Dec 19 07:21:00 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 07:21:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 07:21:01 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Dec 19 07:21:01 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Dec 19 07:21:01 2011] Fit fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Dec 19 07:21:15 2011] Warning, spatial fit 5 centroid is now closest to src. 17
[Mon Dec 19 07:21:16 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 07:21:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 07:21:16 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 07:21:16 2011] Source does appear to be extended
[Mon Dec 19 07:21:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 08:16:05 2011] XMMSAS src. selection expression = ellipse(25358.486000, 25922.026000, 778.524022, 778.524022, 0.000000, X, Y)
[Mon Dec 19 08:16:05 2011] Writing source region out to fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src21_src.reg
[Mon Dec 19 08:16:05 2011] Extracting stamp from image fullrun_mos2_xmm0656202001_pi300-10000_cl_sm2.00.img.gz, (247, 254) - (337, 343)
[Mon Dec 19 08:16:05 2011] XMMSAS bgd. selection expression = annulus(25358.486000, 25922.026000, 1297.540037, 2595.080075, X, Y) && !ellipse(24752.081200, 26143.602200, 1101.120032, 1101.120032, 0.000000, X, Y) && !ellipse(23738.404400, 25993.247200, 1168.376034, 490.168814, 107.803000, X, Y) && !ellipse(24354.795563, 27224.600800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.534200, 28223.016200, 416.512812, 416.512812, 0.000000, X, Y) && !ellipse(25787.929932, 27093.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.352264, 26325.777802, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 08:16:05 2011] Writing fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src21.gif
[Mon Dec 19 08:16:53 2011] Mean detx,y = (478.27, -1452.70) 
[Mon Dec 19 08:16:54 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 08:17:03 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 08:17:03 2011] Setting source spectrum file to fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Dec 19 08:17:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Dec 19 08:28:40 2011] Not generating rmf since there are only 92 counts
[Mon Dec 19 08:28:40 2011] rmf not generated due to insufficient counts
[Mon Dec 19 08:34:02 2011] Updating aperture counts using extracted products
[Mon Dec 19 08:34:02 2011] Error reading totcts from fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Dec 19 08:34:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 08:34:02 2011] Using photon index=1.80, rate=0.00666, arf fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src21.arf
[Mon Dec 19 08:34:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 08:34:02 2011] Updating source flux to 6.8e-14
[Mon Dec 19 08:34:21 2011] Flag c found in src. 21 procflags, skipping spectral fitting
[Mon Dec 19 08:34:21 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting