[Mon Dec 19 02:12:27 2011] Detection parameters:
  Position = (280.5, 313.5) = 5 42 58.78 -35 59 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.1 +/- 10.0
  Background counts = 8.4
  Rate = 0.005 +/- 0.001

[Mon Dec 19 02:12:28 2011] Off-axis axis estimate = 1.70'
[Mon Dec 19 04:10:23 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 04:10:23 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Dec 19 04:10:23 2011] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.635
[Mon Dec 19 04:10:23 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 7.28"
[Mon Dec 19 04:57:13 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src8.ximg exists
[Mon Dec 19 04:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src8.csv
[Mon Dec 19 04:57:13 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Dec 19 04:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src8.csv
[Mon Dec 19 04:57:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 04:57:14 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Dec 19 04:57:14 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Dec 19 04:57:14 2011] Fit fullrun_mos2_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Dec 19 04:57:29 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.918881 pixels away
[Mon Dec 19 04:57:29 2011] Source 16 is offset by -5.116741 and 6.175733 pixels which is larger than
2 X fitted extent = 4.030929 x 4.030929, not incorporating fit results
[Mon Dec 19 04:57:29 2011] Source 16 is offset by -7.296373 and 2.087274 pixels which is larger than
2 X fitted extent = 1.466267 x 1.466267, not incorporating fit results
[Mon Dec 19 04:57:29 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 04:57:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 04:57:29 2011] Assessing source extent using major
[Mon Dec 19 04:57:29 2011] Source does appear to be extended
[Mon Dec 19 04:57:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 06:34:43 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 06:34:43 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Dec 19 06:34:43 2011] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.635
[Mon Dec 19 06:34:43 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.28"
[Mon Dec 19 07:21:00 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src7.ximg exists
[Mon Dec 19 07:21:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src7.csv
[Mon Dec 19 07:21:00 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Dec 19 07:21:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src7.csv
[Mon Dec 19 07:21:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 07:21:01 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Dec 19 07:21:01 2011] fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Dec 19 07:21:01 2011] Fit fullrun_mos2_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Dec 19 07:21:15 2011] Source 16 is offset by -5.276718 and 6.175733 pixels which is larger than
2 X fitted extent = 4.218506 x 4.218506, not incorporating fit results
[Mon Dec 19 07:21:16 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 39.387251 pixels away
[Mon Dec 19 07:21:16 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 07:21:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 07:21:16 2011] Assessing source extent using major
[Mon Dec 19 07:21:16 2011] Source does appear to be extended
[Mon Dec 19 07:21:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 08:16:05 2011] XMMSAS src. selection expression = ellipse(24354.795563, 27224.600800, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 08:16:05 2011] Writing source region out to fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src16_src.reg
[Mon Dec 19 08:16:05 2011] Extracting stamp from image fullrun_mos2_xmm0656202001_pi300-10000_cl_sm2.00.img.gz, (243, 276) - (318, 351)
[Mon Dec 19 08:16:05 2011] XMMSAS bgd. selection expression = annulus(24354.795563, 27224.600800, 1087.500000, 2175.000000, X, Y) && !ellipse(24752.081200, 26143.602200, 1101.120032, 1101.120032, 0.000000, X, Y) && !ellipse(23738.404400, 25993.247200, 1168.376034, 490.168814, 107.803000, X, Y) && !ellipse(25358.486000, 25922.026000, 1038.032030, 1038.032030, 0.000000, X, Y) && !ellipse(19437.646000, 30590.820000, 2879.088083, 2879.088083, 0.000000, X, Y) && !ellipse(23116.534200, 28223.016200, 416.512812, 416.512812, 0.000000, X, Y) && !ellipse(25787.929932, 27093.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.352264, 26325.777802, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 08:16:05 2011] Writing fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src16.gif
[Mon Dec 19 08:17:16 2011] Mean detx,y = (-609.91, -2300.40) 
[Mon Dec 19 08:17:17 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 08:17:26 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 08:17:26 2011] Setting source spectrum file to fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Dec 19 08:17:26 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Dec 19 08:28:45 2011] Not generating rmf since there are only 46 counts
[Mon Dec 19 08:28:45 2011] rmf not generated due to insufficient counts
[Mon Dec 19 08:34:02 2011] Updating aperture counts using extracted products
[Mon Dec 19 08:34:02 2011] Error reading totcts from fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Dec 19 08:34:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 08:34:02 2011] Using photon index=1.80, rate=0.00453, arf fullrun_mos2_xmm0656202001_pi300-10000_pass1_cl_src16.arf
[Mon Dec 19 08:34:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 08:34:02 2011] Updating source flux to 4.2e-14
[Mon Dec 19 08:34:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting