[Mon Dec 19 02:11:53 2011] Detection parameters:
  Position = (287.2, 300.9) = 5 42 56.39 -35 59 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.5 +/- 22.0
  Background counts = 8.6
  Rate = 0.02 +/- 0.002

[Mon Dec 19 02:11:54 2011] Off-axis axis estimate = 0.84'
[Mon Dec 19 03:05:49 2011] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 03:05:49 2011] Initial guess for spatial extent in simple fitting = 6.85"
[Mon Dec 19 03:05:49 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Mon Dec 19 03:05:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.85"
[Mon Dec 19 04:10:22 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 19 04:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 04:10:22 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 19 04:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 04:10:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 04:10:22 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 04:10:22 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 04:10:22 2011] Fit fullrun_mos1_xmm0656202001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 04:57:24 2011] Spatial fit model total counts = 1087.830000, observed total counts = 1089.000000
[Mon Dec 19 04:57:24 2011] Offset between fit and detection position for source 1 = 0.345360 pixels
[Mon Dec 19 04:57:24 2011] 1050.006000 total counts/ 757.968000 bgd. counts: snr = 10.607522
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.345360 pixels
  Position = (286.8, 301.1) = 5 42 56.51 -35 59 54.8
  Extent = 13.7 (13.7-27.4)", rotation angle = 0
  Source counts = 292.0 +/- 32.4
  Background counts = 758.0
  Rate = 0.02 +/- 0.002
[Mon Dec 19 04:57:24 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 04:57:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 04:57:24 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 04:57:24 2011] Source does appear to be extended
[Mon Dec 19 04:57:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 04:57:24 2011] Source is confused with source 2
[Mon Dec 19 05:40:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 05:40:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 05:40:21 2011] Initial guess for spatial extent in simple fitting = 13.69"
[Mon Dec 19 05:40:21 2011] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.052
[Mon Dec 19 05:40:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.69"
[Mon Dec 19 06:34:42 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 19 06:34:42 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 19 06:34:42 2011] Fit fullrun_mos1_xmm0656202001_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Dec 19 06:34:43 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 06:34:43 2011] fullrun_mos1_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 06:34:43 2011] Fit fullrun_mos1_xmm0656202001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 07:21:11 2011] Warning, spatial fit 1 centroid is now closest to src. 18
[Mon Dec 19 07:21:11 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 07:21:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 07:21:11 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 07:21:11 2011] Source does appear to be extended
[Mon Dec 19 07:21:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 07:52:25 2011] XMMSAS src. selection expression = ellipse(24906.499720, 26144.334600, 821.694024, 821.694024, 0.000000, X, Y)
[Mon Dec 19 07:52:25 2011] Writing source region out to fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 19 07:52:25 2011] Extracting stamp from image fullrun_mos1_xmm0656202001_pi300-10000_cl_sm2.00.img.gz, (240, 254) - (334, 348)
[Mon Dec 19 07:52:25 2011] XMMSAS bgd. selection expression = annulus(24906.499720, 26144.334600, 1369.490039, 2738.980079, X, Y) && !ellipse(24560.856000, 25958.920000, 1717.808049, 1717.808049, 0.000000, X, Y) && !ellipse(25046.494415, 27171.309052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24527.085724, 27093.583069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23166.942000, 27140.726000, 1160.752033, 1160.752033, 0.000000, X, Y) && !ellipse(23784.364000, 25612.546000, 1207.728035, 1207.728035, 0.000000, X, Y) && !ellipse(25816.381226, 25368.525574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26203.734070, 25987.864258, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 07:52:25 2011] Writing fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1.gif
[Mon Dec 19 07:52:27 2011] Mean detx,y = (-1267.83, -311.72) 
[Mon Dec 19 07:52:27 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 07:52:35 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 07:52:35 2011] Setting source spectrum file to fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 07:52:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 08:34:01 2011] Updating aperture counts using extracted products
[Mon Dec 19 08:34:01 2011] Error reading totcts from fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 08:34:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 08:34:02 2011] Using photon index=1.80, rate=0.021, arf fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 08:34:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 08:34:02 2011] Updating source flux to 2e-13
[Mon Dec 19 08:34:03 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Dec 19 08:34:21 2011] Reading fit data from xmm0656202001/analysis//spectral/fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 19 08:34:21 2011] Spectral fit parameter nH value = 6.83605e+20
[Mon Dec 19 08:34:21 2011] Spectral fit parameter PhoIndex value = 1.80482
[Mon Dec 19 08:34:21 2011] Failed to get F(0.3-8.0) from xmm0656202001/analysis//spectral/fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 08:34:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 08:34:21 2011] Using Nh = 6.8e+20, photon index=1.80, rate=0.021, arf fullrun_mos1_xmm0656202001_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 08:34:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 08:34:21 2011] Updating source flux to 2.1e-13