[Sun Feb 26 15:30:24 2012] Detection parameters:
  Position = (111.0, 329.0) = 12 2 19.33 -39 52 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.3 +/- 9.9
  Background counts = 6.9
  Rate = 0.003 +/- 0.0006

[Sun Feb 26 15:30:26 2012] Off-axis axis estimate = 13.77'
[Sun Feb 26 20:15:49 2012] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 20:15:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 20:15:49 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Sun Feb 26 20:15:49 2012] source mask rpix=3.1, npix_max = 50, mask sum = 64, frac = 1.262
[Sun Feb 26 20:15:49 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.31"
[Sun Feb 26 22:56:31 2012] fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_src18.ximg exists
[Sun Feb 26 22:56:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_src18.csv
[Sun Feb 26 22:56:31 2012] fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Feb 26 22:56:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_src18.csv
[Sun Feb 26 22:56:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 22:56:32 2012] fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Feb 26 22:56:32 2012] fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Feb 26 22:56:32 2012] Fit fullrun_mos2_xmm0656201801_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Feb 26 22:57:06 2012] Spatial fit model total counts = 136.719000, observed total counts = 137.000000
[Sun Feb 26 22:57:06 2012] Offset between fit and detection position for source 5 = 0.055073 pixels
[Sun Feb 26 22:57:06 2012] 139.322400 total counts/ 113.046000 bgd. counts: snr = 2.471373
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.055073 pixels
  Position = (111.1, 329.0) = 12 2 19.31 -39 52 42.7
  Extent = 4.3 (3.3-6.7)", rotation angle = 0
  Source counts = 26.3 +/- 11.8
  Background counts = 113.0
  Rate = 0.002 +/- 0.0007
[Sun Feb 26 22:57:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 22:57:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 22:57:06 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 22:57:06 2012] Source does appear to be extended
[Sun Feb 26 22:57:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 22:57:06 2012] Deleting source due to low Poisson probability 0.9