[Sun Feb 26 15:29:41 2012] Detection parameters:
  Position = (295.4, 359.1) = 12 1 9.66 -39 50 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 10.5
  Background counts = 17.1
  Rate = 0.003 +/- 0.0007

[Sun Feb 26 15:29:42 2012] Off-axis axis estimate = 4.40'
[Sun Feb 26 17:30:50 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 17:30:50 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Sun Feb 26 17:30:50 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.013
[Sun Feb 26 17:30:50 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.63"
[Sun Feb 26 20:15:49 2012] fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_src26.ximg exists
[Sun Feb 26 20:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_src26.csv
[Sun Feb 26 20:15:49 2012] fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Feb 26 20:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_src26.csv
[Sun Feb 26 20:15:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 20:15:49 2012] fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Feb 26 20:15:49 2012] fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Feb 26 20:15:49 2012] Fit fullrun_mos1_xmm0656201801_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Feb 26 22:56:54 2012] Source 11 is offset by -0.159342 and 1.458147 pixels which is larger than
2 X fitted extent = 1.062579 x 1.062579, not incorporating fit results
[Sun Feb 26 22:56:54 2012] Spatial fit model total counts = 320.756000, observed total counts = 320.000000
[Sun Feb 26 22:56:54 2012] Offset between fit and detection position for source 11 = 1.039291 pixels
[Sun Feb 26 22:56:54 2012] 306.137900 total counts/ 293.458000 bgd. counts: snr = 0.740189
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.039291 pixels
  Position = (295.1, 360.1) = 12 1 9.76 -39 50 28.8
  Extent = 3.8 (2.2-6.9)", rotation angle = 0
  Source counts = 12.7 +/- 17.5
  Background counts = 293.5
  Rate = 0.0007 +/- 0.001
  Deleting source due to low Poisson probability