[Thu Nov 24 02:06:24 2011] Detection parameters:
  Position = (258.6, 334.7) = 19 14 51.15 -59 27 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.9 +/- 12.5
  Background counts = 45.0
  Rate = 0.005 +/- 0.001

[Thu Nov 24 02:06:25 2011] Off-axis axis estimate = 3.91'
[Thu Nov 24 02:08:28 2011] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:08:28 2011] Initial guess for spatial extent in simple fitting = 8.38"
[Thu Nov 24 02:08:28 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.061
[Thu Nov 24 02:08:28 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 8.38"
[Thu Nov 24 03:47:20 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass0_src24.ximg exists
[Thu Nov 24 03:47:20 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Nov 24 03:47:20 2011] Fit fullrun_pn_xmm0656201701_pi300-10000_cl_pass0_src24 appears to have run properly
[Thu Nov 24 03:47:21 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Nov 24 03:47:21 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Nov 24 03:47:21 2011] Fit fullrun_pn_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Nov 24 06:10:55 2011] Spatial fit model total counts = 700.850000, observed total counts = 713.000000
[Thu Nov 24 06:10:55 2011] Offset between fit and detection position for source 24 = 7.692303 pixels
[Thu Nov 24 06:10:55 2011] 666.875000 total counts/ 428.282000 bgd. counts: snr = 11.529030
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 7.692303 pixels
  Position = (252.0, 338.5) = 19 14 54.97 -59 27 39.1
  Extent = 16.8 (16.7-33.5)", rotation angle = 0
  Source counts = 238.6 +/- 25.8
  Background counts = 428.3
  Rate = 0.02 +/- 0.002
[Thu Nov 24 06:10:55 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:10:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:10:55 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:10:55 2011] Source does appear to be extended
[Thu Nov 24 06:10:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:11:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:11:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 06:11:18 2011] Initial guess for spatial extent in simple fitting = 16.76"
[Thu Nov 24 06:11:18 2011] source mask rpix=3.9, npix_max = 75, mask sum = 63, frac = 0.831
[Thu Nov 24 06:11:18 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 16.76"
[Thu Nov 24 08:03:02 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_src22.ximg exists
[Thu Nov 24 08:03:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_src22.csv
[Thu Nov 24 08:03:02 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Nov 24 08:03:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_src22.csv
[Thu Nov 24 08:03:02 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 08:03:03 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Nov 24 08:03:03 2011] fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Nov 24 08:03:03 2011] Fit fullrun_pn_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu Nov 24 09:45:24 2011] Spatial fit model total counts = 6318.240000, observed total counts = 6310.000000
[Thu Nov 24 09:45:24 2011] Offset between fit and detection position for source 24 = 6.148344 pixels
[Thu Nov 24 09:45:24 2011] Warning, changing simple spatial fit ID from 22 to 7
[Thu Nov 24 09:45:24 2011] 4844.090000 total counts/ 3268.710000 bgd. counts: snr = 27.554792
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 6.148344 pixels
  Position = (258.1, 337.9) = 19 14 51.47 -59 27 41.7
  Extent = 33.0 (33.0-33.0)", rotation angle = 0
  Source counts = 1575.4 +/- 69.6
  Background counts = 3268.7
  Rate = 0.1 +/- 0.005
[Thu Nov 24 09:45:24 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 09:45:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 09:45:24 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 09:45:24 2011] Source does appear to be extended
[Thu Nov 24 09:45:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 09:45:24 2011] Source is confused with source 7
[Thu Nov 24 09:45:24 2011] Source is confused with source 9
[Thu Nov 24 09:45:24 2011] Source is confused with source 23
[Thu Nov 24 09:45:24 2011] Source is confused with source 31
[Thu Nov 24 09:45:38 2011] Counts = 1575.380000, rescaling region sizes by 2.000000
[Thu Nov 24 09:45:38 2011] XMMSAS src. selection expression = ellipse(22404.170000, 29352.298000, 3957.408114, 3957.408114, 0.000000, X, Y)
[Thu Nov 24 09:45:38 2011] Writing source region out to fullrun_pn_xmm0656201701_pi300-10000_pass1_cl_src24_src.reg
[Thu Nov 24 09:45:38 2011] Extracting stamp from image fullrun_pn_xmm0656201701_pi300-10000_cl_sm2.00.img.gz, (31, 111) - (486, 565)
[Thu Nov 24 09:45:38 2011] XMMSAS bgd. selection expression = annulus(22404.170000, 29352.298000, 13191.360380, 26382.720759, X, Y) && !ellipse(31609.298000, 21960.784600, 976.712028, 976.712028, 0.000000, X, Y) && !ellipse(24502.929600, 28509.225000, 1060.112031, 1060.112031, 0.000000, X, Y) && !ellipse(13829.100800, 32878.650480, 622.762418, 622.762418, 0.000000, X, Y) && !ellipse(15194.015228, 41448.118439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17735.706000, 33020.661000, 324.655571, 324.655571, 0.000000, X, Y) && !ellipse(23579.112000, 28634.688000, 1319.224038, 1319.224038, 0.000000, X, Y) && !ellipse(37088.569800, 27990.162600, 463.145613, 463.145613, 0.000000, X, Y) && !ellipse(22930.060000, 28690.176000, 1800.016052, 1800.016052, 0.000000, X, Y) && !ellipse(35065.284637, 17513.123581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32022.363525, 41382.140961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26465.010193, 40331.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15813.263800, 37875.320600, 1065.216031, 1065.216031, 0.000000, X, Y) && !ellipse(32510.554382, 34566.794922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29026.123138, 32746.721893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24461.697662, 31694.122253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24542.853800, 30715.250000, 2566.704074, 2566.704074, 0.000000, X, Y) && !ellipse(24456.125000, 29873.526000, 1147.416033, 1147.416033, 0.000000, X, Y) && !ellipse(32749.057822, 30071.130000, 414.241612, 414.241612, 0.000000, X, Y) && !ellipse(22891.646000, 29112.612000, 1273.712037, 1273.712037, 0.000000, X, Y) && !ellipse(27208.330000, 28731.940000, 1239.448036, 1239.448036, 0.000000, X, Y) && !ellipse(26136.945000, 29142.265600, 972.088028, 972.088028, 0.000000, X, Y) && !ellipse(35889.793365, 28314.174377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.602000, 27814.324000, 1175.160034, 1175.160034, 0.000000, X, Y) && !ellipse(25517.993103, 27614.319275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23205.701400, 27740.624000, 1242.312036, 636.807218, 90.000000, X, Y) && !ellipse(37296.711975, 15339.003723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35295.168600, 25338.212900, 514.960015, 514.960015, 0.000000, X, Y) && !ellipse(29267.738460, 25051.008600, 407.416012, 407.416012, 0.000000, X, Y) && !ellipse(36600.258800, 24957.693800, 583.292817, 583.292817, 0.000000, X, Y) && !ellipse(32972.216187, 22654.249298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30736.710724, 22234.680328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30201.704000, 22732.818000, 1432.952041, 1432.952041, 0.000000, X, Y) && !ellipse(33102.616000, 20393.458000, 1500.832043, 1500.832043, 0.000000, X, Y) && !ellipse(31034.873169, 20563.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39634.518372, 19905.528000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.701400, 19260.808800, 425.852812, 425.852812, 0.000000, X, Y) && !ellipse(23516.156769, 14837.618698, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 09:45:38 2011] Writing fullrun_pn_xmm0656201701_pi300-10000_pass1_cl_src24.gif
[Thu Nov 24 10:08:23 2011] Mean detx,y = (-3916.64, -553.45) 
[Thu Nov 24 10:08:28 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 10:22:42 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 10:22:43 2011] Setting source spectrum file to fullrun_pn_xmm0656201701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Nov 24 10:22:43 2011] Setting bgd. spectrum file to fullrun_pn_xmm0656201701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Nov 24 13:02:10 2011] Updating aperture counts using extracted products
[Thu Nov 24 13:02:10 2011] Error reading totcts from fullrun_pn_xmm0656201701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Nov 24 13:02:11 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 13:02:11 2011] Using photon index=1.80, rate=0.115, arf fullrun_pn_xmm0656201701_pi300-10000_pass1_cl_src24.arf
[Thu Nov 24 13:02:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 13:02:11 2011] Updating source flux to 3.5e-13
[Thu Nov 24 13:04:08 2011] Flag c found in src. 24 procflags, skipping spectral fitting