[Thu Nov 24 02:07:19 2011] Detection parameters:
  Position = (377.7, 345.9) = 19 13 43.24 -59 27 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.5 +/- 11.3
  Background counts = 8.6
  Rate = 0.006 +/- 0.0009

[Thu Nov 24 02:07:19 2011] Off-axis axis estimate = 6.69'
[Thu Nov 24 05:02:48 2011] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:02:48 2011] Initial guess for spatial extent in simple fitting = 9.78"
[Thu Nov 24 05:02:48 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Thu Nov 24 05:02:48 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 9.78"
[Thu Nov 24 06:10:43 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_src10.ximg exists
[Thu Nov 24 06:10:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_src10.csv
[Thu Nov 24 06:10:43 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Nov 24 06:10:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_src10.csv
[Thu Nov 24 06:10:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 06:10:44 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Nov 24 06:10:44 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Nov 24 06:10:44 2011] Fit fullrun_mos2_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Nov 24 06:11:07 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.988359 pixels away
[Thu Nov 24 06:11:07 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:11:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:11:07 2011] Assessing source extent using major
[Thu Nov 24 06:11:07 2011] Source does appear to be extended
[Thu Nov 24 06:11:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 09:08:31 2011] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 09:08:31 2011] Initial guess for spatial extent in simple fitting = 9.78"
[Thu Nov 24 09:08:31 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Thu Nov 24 09:08:31 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 9.78"
[Thu Nov 24 09:45:18 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_src9.ximg exists
[Thu Nov 24 09:45:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_src9.csv
[Thu Nov 24 09:45:18 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Nov 24 09:45:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_src9.csv
[Thu Nov 24 09:45:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 09:45:18 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Nov 24 09:45:18 2011] fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Nov 24 09:45:18 2011] Fit fullrun_mos2_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Nov 24 09:45:30 2011] Spatial fit model total counts = 160.000000, observed total counts = 160.000000
[Thu Nov 24 09:45:30 2011] Offset between fit and detection position for source 19 = 0.230701 pixels
[Thu Nov 24 09:45:30 2011] 161.767300 total counts/ 107.485000 bgd. counts: snr = 5.235815
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.230701 pixels
  Position = (377.5, 345.7) = 19 13 43.35 -59 27 7.4
  Extent = 5.0 (3.8-7.2)", rotation angle = 0
  Source counts = 54.3 +/- 12.7
  Background counts = 107.5
  Rate = 0.003 +/- 0.0007
[Thu Nov 24 09:45:30 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 09:45:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 09:45:30 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 09:45:30 2011] Source does appear to be extended
[Thu Nov 24 09:45:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 12:27:34 2011] XMMSAS src. selection expression = ellipse(32790.515800, 30031.258800, 299.718609, 299.718609, 0.000000, X, Y)
[Thu Nov 24 12:27:34 2011] Writing source region out to fullrun_mos2_xmm0656201701_pi300-10000_pass1_cl_src19_src.reg
[Thu Nov 24 12:27:34 2011] Extracting stamp from image fullrun_mos2_xmm0656201701_pi300-10000_cl_sm2.00.img.gz, (360, 329) - (395, 363)
[Thu Nov 24 12:27:34 2011] XMMSAS bgd. selection expression = annulus(32790.515800, 30031.258800, 499.531014, 999.062029, X, Y)
[Thu Nov 24 12:27:34 2011] Writing fullrun_mos2_xmm0656201701_pi300-10000_pass1_cl_src19.gif
[Thu Nov 24 12:35:38 2011] Mean detx,y = (-4134.76, 4345.87) 
[Thu Nov 24 12:35:39 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 12:35:46 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 12:35:46 2011] Setting source spectrum file to fullrun_mos2_xmm0656201701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Nov 24 12:35:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656201701_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Nov 24 12:48:57 2011] Not generating rmf since there are only 54 counts
[Thu Nov 24 12:48:57 2011] rmf not generated due to insufficient counts
[Thu Nov 24 13:02:12 2011] Updating aperture counts using extracted products
[Thu Nov 24 13:02:12 2011] Error reading totcts from fullrun_mos2_xmm0656201701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Nov 24 13:02:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 13:02:12 2011] Using photon index=1.80, rate=0.00308, arf fullrun_mos2_xmm0656201701_pi300-10000_pass1_cl_src19.arf
[Thu Nov 24 13:02:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 13:02:12 2011] Updating source flux to 5e-14
[Thu Nov 24 13:03:28 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting