[Thu Nov 24 02:06:51 2011] Detection parameters:
  Position = (265.5, 312.1) = 19 14 47.26 -59 29 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.2 +/- 11.9
  Background counts = 18.7
  Rate = 0.004 +/- 0.0008

[Thu Nov 24 02:06:51 2011] Off-axis axis estimate = 2.59'
[Thu Nov 24 03:47:21 2011] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:47:21 2011] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Nov 24 03:47:21 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.966
[Thu Nov 24 03:47:21 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 7.72"
[Thu Nov 24 05:02:47 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src17.ximg exists
[Thu Nov 24 05:02:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src17.csv
[Thu Nov 24 05:02:47 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Nov 24 05:02:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src17.csv
[Thu Nov 24 05:02:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 05:02:48 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Nov 24 05:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Nov 24 05:02:48 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Nov 24 05:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Nov 24 05:02:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 06:11:00 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.940706 pixels away
[Thu Nov 24 06:11:00 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:11:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:11:00 2011] Assessing source extent using major
[Thu Nov 24 06:11:00 2011] Source does appear to be extended
[Thu Nov 24 06:11:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 08:03:03 2011] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 08:03:03 2011] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Nov 24 08:03:03 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.966
[Thu Nov 24 08:03:03 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 7.72"
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src16.ximg exists
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Nov 24 09:08:31 2011] Fit fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src16 appears to have run properly
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Nov 24 09:08:31 2011] Fit fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Nov 24 09:45:27 2011] Spatial fit model total counts = 611.260000, observed total counts = 607.000000
[Thu Nov 24 09:45:27 2011] Offset between fit and detection position for source 26 = 7.817905 pixels
[Thu Nov 24 09:45:27 2011] 632.580000 total counts/ 517.782000 bgd. counts: snr = 5.044996
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 7.817905 pixels
  Position = (272.1, 316.3) = 19 14 43.48 -59 29 16.1
  Extent = 15.4 (15.4-15.4)", rotation angle = 0
  Source counts = 114.8 +/- 25.2
  Background counts = 517.8
  Rate = 0.007 +/- 0.001
[Thu Nov 24 09:45:27 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 09:45:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 09:45:27 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 09:45:27 2011] Source does appear to be extended
[Thu Nov 24 09:45:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 11:32:13 2011] XMMSAS src. selection expression = ellipse(23624.234000, 27465.572000, 925.854027, 925.854027, 0.000000, X, Y)
[Thu Nov 24 11:32:13 2011] Writing source region out to fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src26_src.reg
[Thu Nov 24 11:32:13 2011] Extracting stamp from image fullrun_mos1_xmm0656201701_pi300-10000_cl_sm2.00.img.gz, (219, 263) - (325, 369)
[Thu Nov 24 11:32:13 2011] XMMSAS bgd. selection expression = annulus(23624.234000, 27465.572000, 1543.090044, 3086.180089, X, Y) && !ellipse(24587.892281, 28671.365508, 1231.728035, 1029.193398, 305.899735, X, Y) && !ellipse(24360.845400, 29477.192000, 1326.616038, 1326.616038, 0.000000, X, Y) && !ellipse(25288.210938, 30316.902802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25800.658142, 28418.657745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.034000, 30697.424000, 2652.912076, 2652.912076, 0.000000, X, Y) && !ellipse(25893.257599, 29600.950256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23060.922000, 28592.782000, 1326.840038, 1326.840038, 0.000000, X, Y)
[Thu Nov 24 11:32:13 2011] Writing fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src26.gif
[Thu Nov 24 11:41:48 2011] Mean detx,y = (-370.45, -3928.93) 
[Thu Nov 24 11:41:49 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 11:42:09 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 11:42:09 2011] Setting source spectrum file to fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Nov 24 11:42:09 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Nov 24 13:02:11 2011] Updating aperture counts using extracted products
[Thu Nov 24 13:02:11 2011] Error reading totcts from fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Nov 24 13:02:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 13:02:12 2011] Using photon index=1.80, rate=0.00652, arf fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src26.arf
[Thu Nov 24 13:02:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 13:02:12 2011] Updating source flux to 6.7e-14