[Thu Nov 24 02:06:51 2011] Detection parameters:
  Position = (258.6, 331.0) = 19 14 51.17 -59 28 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.3 +/- 10.5
  Background counts = 19.5
  Rate = 0.003 +/- 0.0008

[Thu Nov 24 02:06:51 2011] Off-axis axis estimate = 3.73'
[Thu Nov 24 03:47:21 2011] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:47:21 2011] Initial guess for spatial extent in simple fitting = 8.29"
[Thu Nov 24 03:47:21 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Thu Nov 24 03:47:21 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 8.29"
[Thu Nov 24 05:02:47 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src27.ximg exists
[Thu Nov 24 05:02:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src27.csv
[Thu Nov 24 05:02:47 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Nov 24 05:02:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src27.csv
[Thu Nov 24 05:02:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 05:02:48 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Nov 24 05:02:48 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Nov 24 05:02:48 2011] Fit fullrun_mos1_xmm0656201701_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Nov 24 06:11:00 2011] Spatial fit model total counts = 447.468000, observed total counts = 447.000000
[Thu Nov 24 06:11:00 2011] Offset between fit and detection position for source 22 = 7.230242 pixels
[Thu Nov 24 06:11:00 2011] 455.939500 total counts/ 376.859000 bgd. counts: snr = 4.073615
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 7.230242 pixels
  Position = (265.6, 329.2) = 19 14 47.17 -59 28 19.8
  Extent = 16.6 (16.5-33.2)", rotation angle = 0
  Source counts = 79.1 +/- 21.4
  Background counts = 376.9
  Rate = 0.004 +/- 0.001
[Thu Nov 24 06:11:00 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:11:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:11:00 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:11:00 2011] Source does appear to be extended
[Thu Nov 24 06:11:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:11:00 2011] Source is confused with source 25
[Thu Nov 24 08:03:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 08:03:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 08:03:03 2011] Initial guess for spatial extent in simple fitting = 16.59"
[Thu Nov 24 08:03:03 2011] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.089
[Thu Nov 24 08:03:03 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 16.59"
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src26.ximg exists
[Thu Nov 24 09:08:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src26.csv
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Nov 24 09:08:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src26.csv
[Thu Nov 24 09:08:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Nov 24 09:08:31 2011] fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Nov 24 09:08:31 2011] Fit fullrun_mos1_xmm0656201701_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Thu Nov 24 09:45:27 2011] Warning, spatial fit 26 centroid is now closest to src. 16
[Thu Nov 24 09:45:27 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 09:45:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 09:45:27 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 09:45:27 2011] Source does appear to be extended
[Thu Nov 24 09:45:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 11:32:13 2011] XMMSAS src. selection expression = ellipse(23060.922000, 28592.782000, 995.130029, 995.130029, 0.000000, X, Y)
[Thu Nov 24 11:32:13 2011] Writing source region out to fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src22_src.reg
[Thu Nov 24 11:32:13 2011] Extracting stamp from image fullrun_mos1_xmm0656201701_pi300-10000_cl_sm2.00.img.gz, (208, 272) - (323, 386)
[Thu Nov 24 11:32:13 2011] XMMSAS bgd. selection expression = annulus(23060.922000, 28592.782000, 1658.550048, 3317.100095, X, Y) && !ellipse(24587.892281, 28671.365508, 1231.728035, 1029.193398, 305.899735, X, Y) && !ellipse(23624.234000, 27465.572000, 1234.472036, 1234.472036, 0.000000, X, Y) && !ellipse(24360.845400, 29477.192000, 1326.616038, 1326.616038, 0.000000, X, Y) && !ellipse(25288.210938, 30316.902802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25800.658142, 28418.657745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23432.034000, 30697.424000, 2652.912076, 2652.912076, 0.000000, X, Y) && !ellipse(25893.257599, 29600.950256, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 11:32:13 2011] Writing fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src22.gif
[Thu Nov 24 11:54:32 2011] Mean detx,y = (322.52, -4607.35) 
[Thu Nov 24 11:54:33 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 11:55:03 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 11:55:03 2011] Setting source spectrum file to fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Nov 24 11:55:03 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Nov 24 12:23:45 2011] Not generating rmf since there are only 79 counts
[Thu Nov 24 12:23:45 2011] rmf not generated due to insufficient counts
[Thu Nov 24 13:02:11 2011] Updating aperture counts using extracted products
[Thu Nov 24 13:02:11 2011] Error reading totcts from fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Nov 24 13:02:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 13:02:12 2011] Using photon index=1.80, rate=0.00449, arf fullrun_mos1_xmm0656201701_pi300-10000_pass1_cl_src22.arf
[Thu Nov 24 13:02:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 13:02:12 2011] Updating source flux to 4.9e-14
[Thu Nov 24 13:02:13 2011] Flag c found in src. 22 procflags, skipping spectral fitting
[Thu Nov 24 13:02:13 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting