[Tue Dec 20 22:34:01 2011] Detection parameters:
  Position = (267.4, 319.8) = 4 38 18.61 -54 18 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 360.7 +/- 25.3
  Background counts = 28.7
  Rate = 0.03 +/- 0.002

[Tue Dec 20 22:34:03 2011] Off-axis axis estimate = 2.73'
[Tue Dec 20 22:37:56 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 22:37:56 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Tue Dec 20 22:37:56 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.952
[Tue Dec 20 22:37:56 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.79"
[Wed Dec 21 00:17:53 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_src7.ximg exists
[Wed Dec 21 00:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_src7.csv
[Wed Dec 21 00:17:53 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Dec 21 00:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_src7.csv
[Wed Dec 21 00:17:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 00:17:53 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Dec 21 00:17:53 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Dec 21 00:17:53 2011] Fit fullrun_pn_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Dec 21 04:11:12 2011] Spatial fit model total counts = 2098.960000, observed total counts = 2097.000000
[Wed Dec 21 04:11:12 2011] Offset between fit and detection position for source 7 = 6.174306 pixels
[Wed Dec 21 04:11:12 2011] 2021.840000 total counts/ 1770.870000 bgd. counts: snr = 5.963874
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 6.174306 pixels
  Position = (266.0, 313.8) = 4 38 19.31 -54 18 44.1
  Extent = 13.6 (9.5-15.6)", rotation angle = 0
  Source counts = 251.0 +/- 45.0
  Background counts = 1770.9
  Rate = 0.02 +/- 0.003
[Wed Dec 21 04:11:12 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:11:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:11:12 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 04:11:12 2011] Source does appear to be extended
[Wed Dec 21 04:11:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 04:11:12 2011] Source is confused with source 2
[Wed Dec 21 04:11:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 04:11:48 2011] Initial guess for spatial extent in simple fitting = 13.56"
[Wed Dec 21 04:11:48 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.071
[Wed Dec 21 04:11:48 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 13.56"
[Wed Dec 21 05:40:11 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_src7.ximg exists
[Wed Dec 21 05:40:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_src7.csv
[Wed Dec 21 05:40:11 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Dec 21 05:40:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_src7.csv
[Wed Dec 21 05:40:11 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 05:40:12 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Dec 21 05:40:12 2011] fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Dec 21 05:40:12 2011] Fit fullrun_pn_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Dec 21 09:54:55 2011] Source 7 is offset by -3.132503 and 8.531632 pixels which is larger than
2 X fitted extent = 8.514345 x 8.514345, not incorporating fit results
[Wed Dec 21 09:54:55 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 09:54:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 09:54:55 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 09:54:55 2011] Source does appear to be extended
[Wed Dec 21 09:54:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 09:55:34 2011] XMMSAS src. selection expression = ellipse(23096.564200, 27254.958000, 813.354023, 813.354023, 0.000000, X, Y)
[Wed Dec 21 09:55:34 2011] Writing source region out to fullrun_pn_xmm0656201601_pi300-10000_pass1_cl_src7_src.reg
[Wed Dec 21 09:55:34 2011] Extracting stamp from image fullrun_pn_xmm0656201601_pi300-10000_cl_sm2.00.img.gz, (219, 267) - (313, 361)
[Wed Dec 21 09:55:34 2011] XMMSAS bgd. selection expression = annulus(23096.564200, 27254.958000, 1355.590039, 2711.180078, X, Y) && !ellipse(23442.223140, 26431.797800, 1195.416034, 1037.368030, 47.919739, X, Y) && !ellipse(24739.557098, 27019.698914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20747.208820, 26745.868800, 455.982413, 455.982413, 0.000000, X, Y) && !ellipse(22543.320000, 24302.216000, 1236.568036, 1236.568036, 0.000000, X, Y)
[Wed Dec 21 09:55:34 2011] Writing fullrun_pn_xmm0656201601_pi300-10000_pass1_cl_src7.gif
[Wed Dec 21 10:14:05 2011] Mean detx,y = (1901.00, 1266.06) 
[Wed Dec 21 10:14:11 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 10:15:10 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 10:15:12 2011] Setting source spectrum file to fullrun_pn_xmm0656201601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Dec 21 10:15:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0656201601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Dec 21 16:46:05 2011] Updating aperture counts using extracted products
[Wed Dec 21 16:46:05 2011] Error reading totcts from fullrun_pn_xmm0656201601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Dec 21 16:46:06 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:46:06 2011] Using photon index=1.80, rate=0.0171, arf fullrun_pn_xmm0656201601_pi300-10000_pass1_cl_src7.arf
[Wed Dec 21 16:46:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:46:06 2011] Updating source flux to 3.9e-14
[Wed Dec 21 16:49:21 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Wed Dec 21 16:49:21 2011] Flag c found in src. 7 procflags, skipping spectral fitting