[Tue Dec 20 22:35:45 2011] Detection parameters:
  Position = (159.4, 428.5) = 4 39 12.09 -54 10 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.5 +/- 9.3
  Background counts = 6.9
  Rate = 0.003 +/- 0.0005

[Tue Dec 20 22:35:45 2011] Off-axis axis estimate = 13.81'
[Wed Dec 21 01:35:44 2011] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:35:44 2011] Initial guess for spatial extent in simple fitting = 13.33"
[Wed Dec 21 01:35:44 2011] source mask rpix=3.1, npix_max = 50, mask sum = 45, frac = 0.885
[Wed Dec 21 01:35:44 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 13.33"
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src20.ximg exists
[Wed Dec 21 04:11:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src20.csv
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Dec 21 04:11:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src20.csv
[Wed Dec 21 04:11:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Dec 21 04:11:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Dec 21 04:11:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Dec 21 04:11:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:11:31 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 11.350840 pixels away
[Wed Dec 21 04:11:31 2011] Spatial fit model total counts = 85.247400, observed total counts = 100.000000
[Wed Dec 21 04:11:31 2011] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Dec 21 04:11:31 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:11:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:11:31 2011] Assessing source extent using major
[Wed Dec 21 04:11:31 2011] Source does appear to be extended
[Wed Dec 21 04:11:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 07:09:52 2011] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:09:52 2011] Initial guess for spatial extent in simple fitting = 13.33"
[Wed Dec 21 07:09:52 2011] source mask rpix=3.1, npix_max = 50, mask sum = 45, frac = 0.885
[Wed Dec 21 07:09:52 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 13.33"
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src19.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src19.csv
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src19.csv
[Wed Dec 21 09:54:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Dec 21 09:54:44 2011] Fit fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Dec 21 09:55:14 2011] Spatial fit model total counts = 95.090500, observed total counts = 100.000000
[Wed Dec 21 09:55:14 2011] Offset between fit and detection position for source 36 = 0.113697 pixels
[Wed Dec 21 09:55:14 2011] 88.330800 total counts/ 39.090200 bgd. counts: snr = 7.875704
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.113697 pixels
  Position = (159.4, 428.4) = 4 39 12.08 -54 10 24.5
  Extent = 5.9 (4.8-7.4)", rotation angle = 0
  Source counts = 49.2 +/- 9.4
  Background counts = 39.1
  Rate = 0.003 +/- 0.0005
[Wed Dec 21 09:55:14 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 09:55:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 09:55:14 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 09:55:14 2011] Source does appear to be extended
[Wed Dec 21 09:55:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 14:33:06 2011] XMMSAS src. selection expression = ellipse(13820.069600, 37223.467800, 354.048610, 354.048610, 0.000000, X, Y)
[Wed Dec 21 14:33:06 2011] Writing source region out to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src36_src.reg
[Wed Dec 21 14:33:06 2011] Extracting stamp from image fullrun_mos2_xmm0656201601_pi300-10000_cl_sm2.00.img.gz, (139, 408) - (180, 449)
[Wed Dec 21 14:33:07 2011] XMMSAS bgd. selection expression = annulus(13820.069600, 37223.467800, 590.081017, 1180.162034, X, Y)
[Wed Dec 21 14:33:07 2011] Writing fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src36.gif
[Wed Dec 21 14:48:36 2011] Mean detx,y = (-14681.84, -6333.34) 
[Wed Dec 21 14:48:38 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 14:49:01 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 14:49:02 2011] Setting source spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Dec 21 14:49:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Dec 21 16:28:15 2011] Not generating rmf since there are only 49 counts
[Wed Dec 21 16:28:15 2011] rmf not generated due to insufficient counts
[Wed Dec 21 16:46:12 2011] Updating aperture counts using extracted products
[Wed Dec 21 16:46:12 2011] Error reading totcts from fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Dec 21 16:46:13 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:46:13 2011] Using photon index=1.80, rate=0.00265, arf fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src36.arf
[Wed Dec 21 16:46:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:46:13 2011] Updating source flux to 8.7e-14
[Wed Dec 21 16:47:04 2011] Flag p found in src. 36 procflags, skipping spectral fitting
[Wed Dec 21 16:47:04 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting