[Tue Dec 20 22:35:45 2011] Detection parameters:
  Position = (279.8, 298.8) = 4 38 12.47 -54 19 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.2 +/- 16.1
  Background counts = 10.2
  Rate = 0.009 +/- 0.0009

[Tue Dec 20 22:35:45 2011] Off-axis axis estimate = 1.35'
[Wed Dec 21 01:35:44 2011] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:35:44 2011] Initial guess for spatial extent in simple fitting = 7.10"
[Wed Dec 21 01:35:44 2011] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.769
[Wed Dec 21 01:35:44 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.10"
[Wed Dec 21 04:10:59 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src10.ximg exists
[Wed Dec 21 04:10:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src10.csv
[Wed Dec 21 04:10:59 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Dec 21 04:10:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src10.csv
[Wed Dec 21 04:10:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Dec 21 04:11:00 2011] Fit fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Dec 21 04:11:31 2011] Source 28 is offset by 7.323417 and -4.332435 pixels which is larger than
2 X fitted extent = 4.799724 x 4.799724, not incorporating fit results
[Wed Dec 21 04:11:31 2011] Spatial fit model total counts = 470.556000, observed total counts = 469.000000
[Wed Dec 21 04:11:31 2011] Offset between fit and detection position for source 28 = 1.158491 pixels
[Wed Dec 21 04:11:31 2011] Warning, changing simple spatial fit ID from 10 to 24
[Wed Dec 21 04:11:31 2011] 417.716000 total counts/ 275.710000 bgd. counts: snr = 8.552251
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.158491 pixels
  Position = (280.3, 297.8) = 4 38 12.22 -54 19 54.0
  Extent = 14.0" x 12.1", rotation angle = 90
  Source counts = 142.0 +/- 20.4
  Background counts = 275.7
  Rate = 0.008 +/- 0.001
[Wed Dec 21 04:11:31 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:11:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:11:31 2011] Assessing source extent using major
[Wed Dec 21 04:11:31 2011] Source does appear to be extended
[Wed Dec 21 04:11:31 2011] Computing asymmetry using major and minor axis, asym = 1.16
[Wed Dec 21 04:11:31 2011] Source is confused with source 21
[Wed Dec 21 04:11:31 2011] Source is confused with source 27
[Wed Dec 21 07:09:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:09:52 2011] Initial guess for spatial extent in simple fitting = 13.03"
[Wed Dec 21 07:09:52 2011] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.880
[Wed Dec 21 07:09:52 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 13.03"
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src10.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src10.csv
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src10.csv
[Wed Dec 21 09:54:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Dec 21 09:54:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 09:55:14 2011] Warning, spatial fit 10 centroid is now closest to src. 19
[Wed Dec 21 09:55:14 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 09:55:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 09:55:14 2011] Assessing source extent using major
[Wed Dec 21 09:55:14 2011] Source does appear to be extended
[Wed Dec 21 09:55:14 2011] Computing asymmetry using major and minor axis, asym = 1.16
[Wed Dec 21 14:33:06 2011] XMMSAS src. selection expression = ellipse(24337.782048, 25858.065526, 839.802024, 723.484084, 90.000000, X, Y)
[Wed Dec 21 14:33:06 2011] Writing source region out to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src28_src.reg
[Wed Dec 21 14:33:06 2011] Extracting stamp from image fullrun_mos2_xmm0656201601_pi300-10000_cl_sm2.00.img.gz, (232, 250) - (329, 346)
[Wed Dec 21 14:33:06 2011] XMMSAS bgd. selection expression = annulus(24337.782048, 25858.065526, 1399.670040, 2799.340081, X, Y) && !ellipse(23480.627800, 26404.607600, 1196.608034, 1196.608034, 0.000000, X, Y) && !ellipse(24411.114300, 22746.878600, 327.182409, 327.182409, 0.000000, X, Y) && !ellipse(22943.570000, 26014.148000, 1910.208055, 1910.208055, 0.000000, X, Y) && !ellipse(23196.758000, 27663.952000, 1299.096037, 1299.096037, 0.000000, X, Y) && !ellipse(25134.520000, 26970.812000, 1122.824032, 1122.824032, 0.000000, X, Y) && !ellipse(22706.546000, 27226.528000, 1308.216038, 1308.216038, 0.000000, X, Y) && !ellipse(26969.754800, 25489.865400, 321.070409, 321.070409, 0.000000, X, Y) && !ellipse(25132.370000, 24969.630000, 1119.736032, 1119.736032, 0.000000, X, Y) && !ellipse(22393.088000, 28105.702000, 1335.808038, 1335.808038, 0.000000, X, Y) && !ellipse(23790.075600, 24370.566000, 1187.320034, 1187.320034, 0.000000, X, Y) && !ellipse(23596.440000, 27531.950000, 1215.104035, 1215.104035, 0.000000, X, Y) && !ellipse(22479.900000, 28931.246000, 2598.192075, 2598.192075, 0.000000, X, Y) && !ellipse(21731.990356, 27360.384308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21841.100000, 24723.824000, 1268.096036, 1268.096036, 0.000000, X, Y)
[Wed Dec 21 14:33:06 2011] Writing fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src28.gif
[Wed Dec 21 14:45:09 2011] Mean detx,y = (-448.94, -926.45) 
[Wed Dec 21 14:45:11 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 14:45:25 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 14:45:25 2011] Setting source spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Dec 21 14:45:25 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Dec 21 16:46:11 2011] Updating aperture counts using extracted products
[Wed Dec 21 16:46:11 2011] Error reading totcts from fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Dec 21 16:46:13 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:46:13 2011] Using photon index=1.80, rate=0.00765, arf fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src28.arf
[Wed Dec 21 16:46:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:46:13 2011] Updating source flux to 7.8e-14
[Wed Dec 21 16:47:04 2011] Flag b found in src. 28 procflags, skipping spectral fitting
[Wed Dec 21 16:47:04 2011] Flag c found in src. 28 procflags, skipping spectral fitting