[Tue Dec 20 22:35:44 2011] Detection parameters:
  Position = (270.2, 304.9) = 4 38 17.24 -54 19 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1411.4 +/- 45.3
  Background counts = 10.3
  Rate = 0.08 +/- 0.003

[Tue Dec 20 22:35:45 2011] Off-axis axis estimate = 2.10'
[Wed Dec 21 01:35:44 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:35:44 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Dec 21 01:35:44 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Wed Dec 21 01:35:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.48"
[Wed Dec 21 04:10:59 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 21 04:10:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 04:10:59 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 21 04:10:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 04:10:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 21 04:11:00 2011] Fit fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 21 04:11:31 2011] Spatial fit model total counts = 3492.790000, observed total counts = 3505.000000
[Wed Dec 21 04:11:31 2011] Offset between fit and detection position for source 2 = 0.900603 pixels
[Wed Dec 21 04:11:31 2011] 3487.620000 total counts/ 1268.360000 bgd. counts: snr = 62.314185
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.900603 pixels
  Position = (270.4, 304.1) = 4 38 17.12 -54 19 26.6
  Extent = 15.0 (14.9-29.9)", rotation angle = 0
  Source counts = 2219.3 +/- 59.1
  Background counts = 1268.4
  Rate = 0.1 +/- 0.003
[Wed Dec 21 04:11:31 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:11:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:11:31 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 04:11:31 2011] Source does appear to be extended
[Wed Dec 21 04:11:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 07:09:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:09:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 07:09:52 2011] Initial guess for spatial extent in simple fitting = 14.96"
[Wed Dec 21 07:09:52 2011] source mask rpix=3.4, npix_max = 62, mask sum = 56, frac = 0.903
[Wed Dec 21 07:09:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.96"
[Wed Dec 21 09:54:43 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 21 09:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 09:54:43 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 21 09:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 09:54:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 21 09:54:44 2011] Fit fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 21 09:55:14 2011] Warning, spatial fit 1 centroid is now closest to src. 26
[Wed Dec 21 09:55:14 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 09:55:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 09:55:14 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 09:55:14 2011] Source does appear to be extended
[Wed Dec 21 09:55:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 09:55:14 2011] Source is confused with source 26
[Wed Dec 21 14:33:06 2011] Counts = 2219.260000, rescaling region sizes by 2.000000
[Wed Dec 21 14:33:06 2011] XMMSAS src. selection expression = ellipse(23480.627800, 26404.607600, 1794.912052, 1794.912052, 0.000000, X, Y)
[Wed Dec 21 14:33:06 2011] Writing source region out to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 21 14:33:06 2011] Extracting stamp from image fullrun_mos2_xmm0656201601_pi300-10000_cl_sm2.00.img.gz, (167, 201) - (374, 407)
[Wed Dec 21 14:33:06 2011] XMMSAS bgd. selection expression = annulus(23480.627800, 26404.607600, 5983.040172, 11966.080344, X, Y) && !ellipse(14868.216583, 28068.698334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12153.321686, 17680.167404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13763.138962, 32498.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31008.723550, 29532.754200, 532.877493, 532.877493, 0.000000, X, Y) && !ellipse(33882.966210, 28208.509800, 410.631212, 410.631212, 0.000000, X, Y) && !ellipse(24411.114300, 22746.878600, 327.182409, 327.182409, 0.000000, X, Y) && !ellipse(22943.570000, 26014.148000, 1910.208055, 1910.208055, 0.000000, X, Y) && !ellipse(24337.782048, 25858.065526, 1119.736032, 964.645446, 90.000000, X, Y) && !ellipse(23196.758000, 27663.952000, 1299.096037, 1299.096037, 0.000000, X, Y) && !ellipse(28180.750200, 26150.239560, 797.142423, 797.142423, 0.000000, X, Y) && !ellipse(31902.212800, 19238.115000, 566.377809, 566.377809, 0.000000, X, Y) && !ellipse(25134.520000, 26970.812000, 1122.824032, 1122.824032, 0.000000, X, Y) && !ellipse(22706.546000, 27226.528000, 1308.216038, 1308.216038, 0.000000, X, Y) && !ellipse(26969.754800, 25489.865400, 321.070409, 321.070409, 0.000000, X, Y) && !ellipse(15512.741800, 36183.540600, 315.779209, 315.779209, 0.000000, X, Y) && !ellipse(13820.069600, 37223.467800, 472.064814, 472.064814, 0.000000, X, Y) && !ellipse(21353.253082, 36549.164581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.302000, 30633.322400, 959.834555, 959.834555, 0.000000, X, Y) && !ellipse(18207.149567, 18776.883011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25132.370000, 24969.630000, 1119.736032, 1119.736032, 0.000000, X, Y) && !ellipse(22393.088000, 28105.702000, 1335.808038, 1335.808038, 0.000000, X, Y) && !ellipse(23790.075600, 24370.566000, 1187.320034, 1187.320034, 0.000000, X, Y) && !ellipse(23596.440000, 27531.950000, 1215.104035, 1215.104035, 0.000000, X, Y) && !ellipse(22479.900000, 28931.246000, 2598.192075, 2598.192075, 0.000000, X, Y) && !ellipse(21731.990356, 27360.384308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21841.100000, 24723.824000, 1268.096036, 1268.096036, 0.000000, X, Y)
[Wed Dec 21 14:33:06 2011] Writing fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2.gif
[Wed Dec 21 14:33:13 2011] Mean detx,y = (-1380.57, -1047.19) 
[Wed Dec 21 14:33:17 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 14:41:09 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 14:41:10 2011] Setting source spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 21 14:41:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 21 16:46:11 2011] Updating aperture counts using extracted products
[Wed Dec 21 16:46:11 2011] Error reading totcts from fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 21 16:46:13 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:46:13 2011] Using photon index=1.80, rate=0.12, arf fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2.arf
[Wed Dec 21 16:46:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:46:13 2011] Updating source flux to 1e-12
[Wed Dec 21 16:47:04 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Dec 21 16:49:21 2011] Reading fit data from xmm0656201601/analysis//spectral/fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2_pl.csv
[Wed Dec 21 16:49:21 2011] Spectral fit parameter nH value = 6.73449e+20
[Wed Dec 21 16:49:21 2011] Spectral fit parameter PhoIndex value = 1.80574
[Wed Dec 21 16:49:21 2011] Failed to get F(0.3-8.0) from xmm0656201601/analysis//spectral/fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Dec 21 16:49:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:49:21 2011] Using Nh = 6.7e+20, photon index=1.81, rate=0.12, arf fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src2.arf
[Wed Dec 21 16:49:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:49:21 2011] Updating source flux to 1.1e-12