[Tue Dec 20 22:35:44 2011] Detection parameters:
  Position = (267.9, 321.7) = 4 38 18.39 -54 18 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.9 +/- 16.0
  Background counts = 10.1
  Rate = 0.008 +/- 0.0009

[Tue Dec 20 22:35:45 2011] Off-axis axis estimate = 2.79'
[Wed Dec 21 01:35:44 2011] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:35:44 2011] Initial guess for spatial extent in simple fitting = 7.82"
[Wed Dec 21 01:35:44 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.947
[Wed Dec 21 01:35:44 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.82"
[Wed Dec 21 04:10:59 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src11.ximg exists
[Wed Dec 21 04:10:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src11.csv
[Wed Dec 21 04:10:59 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Dec 21 04:10:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src11.csv
[Wed Dec 21 04:10:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Dec 21 04:11:00 2011] Fit fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Dec 21 04:11:31 2011] Source 18 is offset by -0.592490 and -7.623210 pixels which is larger than
2 X fitted extent = 1.536193 x 1.536193, not incorporating fit results
[Wed Dec 21 04:11:31 2011] Spatial fit model total counts = 461.573000, observed total counts = 459.000000
[Wed Dec 21 04:11:31 2011] Offset between fit and detection position for source 18 = 3.241950 pixels
[Wed Dec 21 04:11:31 2011] Warning, changing simple spatial fit ID from 11 to 25
[Wed Dec 21 04:11:31 2011] 440.435700 total counts/ 377.765000 bgd. counts: snr = 3.224435
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.241950 pixels
  Position = (267.4, 318.5) = 4 38 18.64 -54 18 23.6
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 62.7 +/- 21.0
  Background counts = 377.8
  Rate = 0.003 +/- 0.001
[Wed Dec 21 04:11:31 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:11:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:11:31 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 04:11:31 2011] Source does appear to be extended
[Wed Dec 21 04:11:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 04:11:31 2011] Source is confused with source 19
[Wed Dec 21 04:11:31 2011] Source is confused with source 16
[Wed Dec 21 07:09:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:09:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 07:09:52 2011] Initial guess for spatial extent in simple fitting = 16.24"
[Wed Dec 21 07:09:52 2011] source mask rpix=3.7, npix_max = 71, mask sum = 81, frac = 1.130
[Wed Dec 21 07:09:52 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 16.24"
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src11.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src11.csv
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Dec 21 09:54:44 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src11.csv
[Wed Dec 21 09:54:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Dec 21 09:54:44 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Dec 21 09:54:44 2011] Fit fullrun_mos2_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Dec 21 09:55:14 2011] Warning, spatial fit 11 centroid is now closest to src. 15
[Wed Dec 21 09:55:14 2011] Spatial fit model total counts = 463.011000, observed total counts = 459.000000
[Wed Dec 21 09:55:14 2011] Offset between fit and detection position for source 18 = 0.189149 pixels
[Wed Dec 21 09:55:14 2011] Warning, changing simple spatial fit ID from 11 to 24
[Wed Dec 21 09:55:14 2011] 442.972500 total counts/ 368.115000 bgd. counts: snr = 3.901607
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.189149 pixels
  Position = (267.2, 318.5) = 4 38 18.73 -54 18 23.6
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 74.9 +/- 21.0
  Background counts = 368.1
  Rate = 0.004 +/- 0.001
[Wed Dec 21 09:55:14 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 09:55:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 09:55:14 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 09:55:14 2011] Source does appear to be extended
[Wed Dec 21 09:55:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 14:33:06 2011] XMMSAS src. selection expression = ellipse(23196.758000, 27663.952000, 974.322028, 974.322028, 0.000000, X, Y)
[Wed Dec 21 14:33:06 2011] Writing source region out to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src18_src.reg
[Wed Dec 21 14:33:06 2011] Extracting stamp from image fullrun_mos2_xmm0656201601_pi300-10000_cl_sm2.00.img.gz, (211, 263) - (323, 375)
[Wed Dec 21 14:33:06 2011] XMMSAS bgd. selection expression = annulus(23196.758000, 27663.952000, 1623.870047, 3247.740093, X, Y) && !ellipse(23480.627800, 26404.607600, 1196.608034, 1196.608034, 0.000000, X, Y) && !ellipse(22943.570000, 26014.148000, 1910.208055, 1910.208055, 0.000000, X, Y) && !ellipse(24337.782048, 25858.065526, 1119.736032, 964.645446, 90.000000, X, Y) && !ellipse(25134.520000, 26970.812000, 1122.824032, 1122.824032, 0.000000, X, Y) && !ellipse(22706.546000, 27226.528000, 1308.216038, 1308.216038, 0.000000, X, Y) && !ellipse(25132.370000, 24969.630000, 1119.736032, 1119.736032, 0.000000, X, Y) && !ellipse(22393.088000, 28105.702000, 1335.808038, 1335.808038, 0.000000, X, Y) && !ellipse(23790.075600, 24370.566000, 1187.320034, 1187.320034, 0.000000, X, Y) && !ellipse(23596.440000, 27531.950000, 1215.104035, 1215.104035, 0.000000, X, Y) && !ellipse(22479.900000, 28931.246000, 2598.192075, 2598.192075, 0.000000, X, Y) && !ellipse(21731.990356, 27360.384308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21841.100000, 24723.824000, 1268.096036, 1268.096036, 0.000000, X, Y)
[Wed Dec 21 14:33:06 2011] Writing fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src18.gif
[Wed Dec 21 14:45:30 2011] Mean detx,y = (-1874.47, -1662.39) 
[Wed Dec 21 14:45:32 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 14:45:52 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 14:45:52 2011] Setting source spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 21 14:45:52 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Dec 21 16:05:02 2011] Not generating rmf since there are only 74 counts
[Wed Dec 21 16:05:02 2011] rmf not generated due to insufficient counts
[Wed Dec 21 16:46:11 2011] Updating aperture counts using extracted products
[Wed Dec 21 16:46:11 2011] Error reading totcts from fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 21 16:46:13 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:46:13 2011] Using photon index=1.80, rate=0.00403, arf fullrun_mos2_xmm0656201601_pi300-10000_pass1_cl_src18.arf
[Wed Dec 21 16:46:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:46:13 2011] Updating source flux to 3.6e-14
[Wed Dec 21 16:47:04 2011] Flag b found in src. 18 procflags, skipping spectral fitting
[Wed Dec 21 16:47:04 2011] Flag c found in src. 18 procflags, skipping spectral fitting
[Wed Dec 21 16:47:04 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting