[Tue Dec 20 22:35:44 2011] Detection parameters:
  Position = (103.9, 357.8) = 4 39 39.78 -54 15 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.3 +/- 8.2
  Background counts = 5.0
  Rate = 0.002 +/- 0.0004

[Tue Dec 20 22:35:45 2011] Off-axis axis estimate = 14.75'
[Wed Dec 21 01:35:44 2011] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:35:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 01:35:44 2011] Initial guess for spatial extent in simple fitting = 13.80"
[Wed Dec 21 01:35:44 2011] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.038
[Wed Dec 21 01:35:44 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 13.80"
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src30.ximg exists
[Wed Dec 21 04:11:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src30.csv
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Dec 21 04:11:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src30.csv
[Wed Dec 21 04:11:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Dec 21 04:11:00 2011] fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Dec 21 04:11:00 2011] Fit fullrun_mos2_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Dec 21 04:11:31 2011] Spatial fit model total counts = 119.116000, observed total counts = 117.000000
[Wed Dec 21 04:11:31 2011] Offset between fit and detection position for source 13 = 0.549570 pixels
[Wed Dec 21 04:11:31 2011] 117.506500 total counts/ 100.928000 bgd. counts: snr = 1.650211
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.549570 pixels
  Position = (104.0, 358.3) = 4 39 39.72 -54 15 28.2
  Extent = 3.5" x 3.5", rotation angle = 0
  Source counts = 16.6 +/- 10.8
  Background counts = 100.9
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability