[Tue Dec 20 22:34:51 2011] Detection parameters:
  Position = (263.2, 318.3) = 4 38 20.71 -54 18 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.2 +/- 16.8
  Background counts = 13.8
  Rate = 0.009 +/- 0.001

[Tue Dec 20 22:34:52 2011] Off-axis axis estimate = 2.93'
[Wed Dec 21 00:17:54 2011] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 00:17:54 2011] Initial guess for spatial extent in simple fitting = 7.90"
[Wed Dec 21 00:17:54 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.933
[Wed Dec 21 00:17:54 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.90"
[Wed Dec 21 01:35:44 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src7.ximg exists
[Wed Dec 21 01:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src7.csv
[Wed Dec 21 01:35:44 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Dec 21 01:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src7.csv
[Wed Dec 21 01:35:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 01:35:44 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Dec 21 01:35:44 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Dec 21 01:35:44 2011] Fit fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Dec 21 04:11:21 2011] Source 6 is offset by 3.477690 and -7.938336 pixels which is larger than
2 X fitted extent = 7.259862 x 7.259862, not incorporating fit results
[Wed Dec 21 04:11:21 2011] Spatial fit model total counts = 525.626000, observed total counts = 524.000000
[Wed Dec 21 04:11:21 2011] Offset between fit and detection position for source 6 = 7.477247 pixels
[Wed Dec 21 04:11:21 2011] Warning, changing simple spatial fit ID from 7 to 14
[Wed Dec 21 04:11:21 2011] 539.349000 total counts/ 435.772000 bgd. counts: snr = 4.961736
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 7.477247 pixels
  Position = (259.5, 311.8) = 4 38 22.56 -54 18 52.7
  Extent = 16.3 (16.3-16.3)", rotation angle = 0
  Source counts = 103.6 +/- 23.2
  Background counts = 435.8
  Rate = 0.006 +/- 0.001
[Wed Dec 21 04:11:21 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:11:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:11:21 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 04:11:21 2011] Source does appear to be extended
[Wed Dec 21 04:11:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 04:11:21 2011] Source is confused with source 18
[Wed Dec 21 05:40:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 05:40:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 05:40:12 2011] Initial guess for spatial extent in simple fitting = 16.27"
[Wed Dec 21 05:40:12 2011] source mask rpix=3.7, npix_max = 71, mask sum = 69, frac = 0.959
[Wed Dec 21 05:40:12 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 16.27"
[Wed Dec 21 07:09:51 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src7.ximg exists
[Wed Dec 21 07:09:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src7.csv
[Wed Dec 21 07:09:51 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Dec 21 07:09:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src7.csv
[Wed Dec 21 07:09:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 07:09:52 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Dec 21 07:09:52 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Dec 21 07:09:52 2011] Fit fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Dec 21 09:55:02 2011] Warning, spatial fit 7 centroid is now closest to src. 2
[Wed Dec 21 09:55:03 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 09:55:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 09:55:03 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 09:55:03 2011] Source does appear to be extended
[Wed Dec 21 09:55:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 12:11:48 2011] XMMSAS src. selection expression = ellipse(22526.748000, 27081.161400, 976.392028, 976.392028, 0.000000, X, Y)
[Wed Dec 21 12:11:48 2011] Writing source region out to fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src6_src.reg
[Wed Dec 21 12:11:48 2011] Extracting stamp from image fullrun_mos1_xmm0656201601_pi300-10000_cl_sm2.00.img.gz, (203, 256) - (316, 368)
[Wed Dec 21 12:11:48 2011] XMMSAS bgd. selection expression = annulus(22526.748000, 27081.161400, 1627.320047, 3254.640094, X, Y) && !ellipse(23469.394000, 26493.238000, 1700.968049, 1700.968049, 0.000000, X, Y) && !ellipse(22853.612793, 25486.886780, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(21913.435059, 26846.306915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20737.863754, 26765.262146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23348.135895, 24891.010590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20708.604000, 28085.684000, 1354.064039, 1354.064039, 0.000000, X, Y)
[Wed Dec 21 12:11:48 2011] Writing fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src6.gif
[Wed Dec 21 12:28:55 2011] Mean detx,y = (-942.92, 1838.62) 
[Wed Dec 21 12:28:57 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 12:29:14 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 12:29:15 2011] Setting source spectrum file to fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Dec 21 12:29:15 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Dec 21 16:46:08 2011] Updating aperture counts using extracted products
[Wed Dec 21 16:46:08 2011] Error reading totcts from fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Dec 21 16:46:10 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:46:10 2011] Using photon index=1.80, rate=0.00558, arf fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src6.arf
[Wed Dec 21 16:46:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:46:10 2011] Updating source flux to 5.1e-14
[Wed Dec 21 16:46:16 2011] Flag b found in src. 6 procflags, skipping spectral fitting
[Wed Dec 21 16:46:16 2011] Flag c found in src. 6 procflags, skipping spectral fitting