[Tue Dec 20 22:34:51 2011] Detection parameters:
  Position = (270.2, 304.9) = 4 38 17.23 -54 19 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1421.1 +/- 45.9
  Background counts = 13.8
  Rate = 0.08 +/- 0.003

[Tue Dec 20 22:34:52 2011] Off-axis axis estimate = 2.10'
[Wed Dec 21 00:17:54 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 00:17:54 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Dec 21 00:17:54 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Wed Dec 21 00:17:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.48"
[Wed Dec 21 01:35:43 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 21 01:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 01:35:43 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 21 01:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 01:35:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 01:35:44 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 21 01:35:44 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 21 01:35:44 2011] Fit fullrun_mos1_xmm0656201601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 21 04:11:21 2011] Spatial fit model total counts = 3490.500000, observed total counts = 3485.000000
[Wed Dec 21 04:11:21 2011] Offset between fit and detection position for source 2 = 0.517773 pixels
[Wed Dec 21 04:11:21 2011] 3505.180000 total counts/ 1463.330000 bgd. counts: snr = 53.376820
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.517773 pixels
  Position = (270.2, 304.4) = 4 38 17.25 -54 19 25.1
  Extent = 15.0 (14.9-29.9)", rotation angle = 0
  Source counts = 2041.8 +/- 59.2
  Background counts = 1463.3
  Rate = 0.1 +/- 0.003
[Wed Dec 21 04:11:21 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:11:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:11:21 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 04:11:21 2011] Source does appear to be extended
[Wed Dec 21 04:11:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 04:11:21 2011] Source is confused with source 26
[Wed Dec 21 05:40:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 05:40:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 05:40:12 2011] Initial guess for spatial extent in simple fitting = 14.96"
[Wed Dec 21 05:40:12 2011] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.032
[Wed Dec 21 05:40:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.96"
[Wed Dec 21 07:09:51 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 21 07:09:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 07:09:51 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 21 07:09:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 07:09:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 07:09:52 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 21 07:09:52 2011] fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 21 07:09:52 2011] Fit fullrun_mos1_xmm0656201601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 21 09:55:02 2011] Spatial fit model total counts = 5312.130000, observed total counts = 5318.000000
[Wed Dec 21 09:55:02 2011] Offset between fit and detection position for source 2 = 0.639361 pixels
[Wed Dec 21 09:55:02 2011] 5288.460000 total counts/ 1850.330000 bgd. counts: snr = 79.927770
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.639361 pixels
  Position = (269.9, 305.0) = 4 38 17.40 -54 19 22.6
  Extent = 20.1 (19.0-20.8)", rotation angle = 0
  Source counts = 3438.1 +/- 72.7
  Background counts = 1850.3
  Rate = 0.2 +/- 0.004
[Wed Dec 21 09:55:02 2011] Spatial fit model total counts = 2977.810000, observed total counts = 2974.000000
[Wed Dec 21 09:55:02 2011] Offset between fit and detection position for source 2 = 0.444440 pixels
[Wed Dec 21 09:55:02 2011] Warning, changing simple spatial fit ID from 1 to 7
[Wed Dec 21 09:55:02 2011] 3000.450000 total counts/ 1499.420000 bgd. counts: snr = 38.763923
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.444440 pixels
  Position = (270.3, 305.1) = 4 38 17.18 -54 19 22.2
  Extent = 21.3 (19.3-24.3)", rotation angle = 0
  Source counts = 1501.0 +/- 54.8
  Background counts = 1499.4
  Rate = 0.08 +/- 0.003
[Wed Dec 21 09:55:03 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 09:55:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 09:55:03 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 09:55:03 2011] Source does appear to be extended
[Wed Dec 21 09:55:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 12:11:48 2011] Counts = 1501.030000, rescaling region sizes by 2.000000
[Wed Dec 21 12:11:48 2011] XMMSAS src. selection expression = ellipse(23469.394000, 26493.238000, 2551.452073, 2551.452073, 0.000000, X, Y)
[Wed Dec 21 12:11:48 2011] Writing source region out to fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 21 12:11:48 2011] Extracting stamp from image fullrun_mos1_xmm0656201601_pi300-10000_cl_sm2.00.img.gz, (124, 158) - (417, 452)
[Wed Dec 21 12:11:48 2011] XMMSAS bgd. selection expression = annulus(23469.394000, 26493.238000, 8504.840245, 17009.680489, X, Y) && !ellipse(14854.744965, 28066.274292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12150.681259, 17676.674713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10923.121162, 34833.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13781.725494, 32559.746765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24399.128072, 22759.092000, 332.161610, 234.084807, 341.596621, X, Y) && !ellipse(22526.748000, 27081.161400, 1301.856037, 1301.856037, 0.000000, X, Y) && !ellipse(33969.408020, 28206.911194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21376.281200, 36578.020800, 382.351211, 382.351211, 0.000000, X, Y) && !ellipse(31794.519531, 19195.919647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.612793, 25486.886780, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28179.909600, 26105.495200, 1007.760029, 480.084014, 348.976781, X, Y) && !ellipse(26988.025000, 25505.818400, 352.153610, 352.153610, 0.000000, X, Y) && !ellipse(21913.435059, 26846.306915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18081.285000, 18878.839400, 831.120024, 831.120024, 0.000000, X, Y) && !ellipse(13815.237274, 37265.701233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20737.863754, 26765.262146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23348.135895, 24891.010590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9036.330566, 20640.768005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23037.008942, 14277.686295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20708.604000, 28085.684000, 1354.064039, 1354.064039, 0.000000, X, Y) && !ellipse(15518.431931, 36181.772247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19256.069336, 40123.431396, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 21 12:11:48 2011] Writing fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2.gif
[Wed Dec 21 12:11:54 2011] Mean detx,y = (-853.44, 1208.34) 
[Wed Dec 21 12:11:58 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 12:25:51 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 12:25:51 2011] Setting source spectrum file to fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 21 12:25:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 21 16:46:07 2011] Updating aperture counts using extracted products
[Wed Dec 21 16:46:07 2011] Error reading totcts from fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 21 16:46:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:46:09 2011] Using photon index=1.80, rate=0.0808, arf fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2.arf
[Wed Dec 21 16:46:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:46:09 2011] Updating source flux to 6.7e-13
[Wed Dec 21 16:46:16 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Dec 21 16:47:04 2011] Reading fit data from xmm0656201601/analysis//spectral/fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2_pl.csv
[Wed Dec 21 16:47:04 2011] Spectral fit parameter nH value = 6.70107e+20
[Wed Dec 21 16:47:04 2011] Spectral fit parameter PhoIndex value = 1.82229
[Wed Dec 21 16:47:04 2011] Failed to get F(0.3-8.0) from xmm0656201601/analysis//spectral/fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Dec 21 16:47:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 16:47:04 2011] Using Nh = 6.7e+20, photon index=1.82, rate=0.0808, arf fullrun_mos1_xmm0656201601_pi300-10000_pass1_cl_src2.arf
[Wed Dec 21 16:47:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 16:47:04 2011] Updating source flux to 7.1e-13