[Sun Feb 12 11:22:01 2012] Detection parameters:
  Position = (188.1, 301.5) = 5 50 18.56 -62 4 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.6 +/- 17.0
  Background counts = 11.6
  Rate = 0.02 +/- 0.002

[Sun Feb 12 11:22:02 2012] Off-axis axis estimate = 8.00'
[Sun Feb 12 11:22:57 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:22:57 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Sun Feb 12 11:22:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.834
[Sun Feb 12 11:22:57 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.43"
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src6.ximg exists
[Sun Feb 12 12:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src6.csv
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Feb 12 12:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src6.csv
[Sun Feb 12 12:28:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Feb 12 12:28:25 2012] Fit fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Feb 12 13:39:12 2012] Spatial fit model total counts = 264.999000, observed total counts = 265.000000
[Sun Feb 12 13:39:12 2012] Offset between fit and detection position for source 6 = 2.098244 pixels
[Sun Feb 12 13:39:12 2012] 264.117000 total counts/ 142.202000 bgd. counts: snr = 10.223610
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.098244 pixels
  Position = (187.5, 303.5) = 5 50 18.96 -62 4 54.3
  Extent = 5.7 (5.0-6.7)", rotation angle = 0
  Source counts = 121.9 +/- 16.3
  Background counts = 142.2
  Rate = 0.01 +/- 0.002
[Sun Feb 12 13:39:12 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 13:39:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 13:39:12 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 13:39:12 2012] Source does appear to be extended
[Sun Feb 12 13:39:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 13:39:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 13:39:24 2012] Initial guess for spatial extent in simple fitting = 5.69"
[Sun Feb 12 13:39:24 2012] source mask rpix=1.3, npix_max = 13, mask sum = 6, frac = 0.459
[Sun Feb 12 13:39:24 2012] Skipping simple spatial due to low active detector fraction
[Sun Feb 12 15:36:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:36:16 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 15:36:16 2012] Source does appear to be extended
[Sun Feb 12 15:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:36:25 2012] XMMSAS src. selection expression = ellipse(16260.387800, 26355.489400, 341.323810, 341.323810, 0.000000, X, Y)
[Sun Feb 12 15:36:25 2012] Writing source region out to fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src6_src.reg
[Sun Feb 12 15:36:25 2012] Extracting stamp from image fullrun_pn_xmm0656201301_pi300-10000_cl_sm2.00.img.gz, (168, 284) - (207, 323)
[Sun Feb 12 15:36:25 2012] XMMSAS bgd. selection expression = annulus(16260.387800, 26355.489400, 568.873016, 1137.746033, X, Y)
[Sun Feb 12 15:36:25 2012] Writing fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src6.gif
[Sun Feb 12 15:43:36 2012] Mean detx,y = (8146.58, -1451.70) 
[Sun Feb 12 15:43:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 15:44:07 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 15:44:08 2012] Setting source spectrum file to fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 12 15:44:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Feb 12 17:14:55 2012] Updating aperture counts using extracted products
[Sun Feb 12 17:14:55 2012] Error reading totcts from fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 12 17:14:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 17:14:55 2012] Using photon index=1.80, rate=0.0121, arf fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src6.arf
[Sun Feb 12 17:14:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 17:14:55 2012] Updating source flux to 6.4e-14