[Sun Feb 12 11:22:01 2012] Detection parameters:
  Position = (271.6, 94.1) = 5 49 26.98 -62 20 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.8 +/- 11.4
  Background counts = 8.0
  Rate = 0.006 +/- 0.001

[Sun Feb 12 11:22:02 2012] Off-axis axis estimate = 14.94'
[Sun Feb 12 11:22:57 2012] Using EEF radius (= 13.90 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:22:57 2012] Initial guess for spatial extent in simple fitting = 13.90"
[Sun Feb 12 11:22:57 2012] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.970
[Sun Feb 12 11:22:57 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.90"
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src5.ximg exists
[Sun Feb 12 12:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src5.csv
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Feb 12 12:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src5.csv
[Sun Feb 12 12:28:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Feb 12 12:28:25 2012] Fit fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Feb 12 13:39:12 2012] Warning, spatial fit 5 centroid is now closest to src. 9
[Sun Feb 12 13:39:12 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.021276 pixels away
[Sun Feb 12 13:39:12 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 13:39:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 13:39:12 2012] Assessing source extent using major
[Sun Feb 12 13:39:12 2012] Source does appear to be extended
[Sun Feb 12 13:39:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 13:39:24 2012] Using EEF radius (= 13.90 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 13:39:24 2012] Initial guess for spatial extent in simple fitting = 13.90"
[Sun Feb 12 13:39:24 2012] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.970
[Sun Feb 12 13:39:24 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.90"
[Sun Feb 12 14:19:34 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_src5.ximg exists
[Sun Feb 12 14:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_src5.csv
[Sun Feb 12 14:19:34 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Feb 12 14:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_src5.csv
[Sun Feb 12 14:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 14:19:34 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Feb 12 14:19:34 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Feb 12 14:19:34 2012] Fit fullrun_pn_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Feb 12 15:36:16 2012] Spatial fit model total counts = 268.283000, observed total counts = 275.000000
[Sun Feb 12 15:36:16 2012] Offset between fit and detection position for source 5 = 0.799596 pixels
[Sun Feb 12 15:36:16 2012] 119.373900 total counts/ 45.162500 bgd. counts: snr = 11.042862
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.799596 pixels
  Position = (271.8, 93.3) = 5 49 26.86 -62 20 9.5
  Extent = 10.7 (5.6-15.1)", rotation angle = 0
  Source counts = 74.2 +/- 10.9
  Background counts = 45.2
  Rate = 0.007 +/- 0.001
[Sun Feb 12 15:36:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:36:16 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 15:36:16 2012] Source does appear to be extended
[Sun Feb 12 15:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:36:25 2012] XMMSAS src. selection expression = ellipse(23597.077200, 8072.332000, 643.284019, 643.284019, 0.000000, X, Y)
[Sun Feb 12 15:36:25 2012] Writing source region out to fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src5_src.reg
[Sun Feb 12 15:36:25 2012] Extracting stamp from image fullrun_pn_xmm0656201301_pi300-10000_cl_sm2.00.img.gz, (235, 56) - (309, 130)
[Sun Feb 12 15:36:25 2012] XMMSAS bgd. selection expression = annulus(23597.077200, 8072.332000, 1072.140031, 2144.280062, X, Y) && !ellipse(25149.453796, 8723.874771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22916.749390, 8136.930763, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 15:36:25 2012] Writing fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src5.gif
[Sun Feb 12 15:43:04 2012] Mean detx,y = (-4943.92, -16079.51) 
[Sun Feb 12 15:43:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 15:43:30 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 15:43:30 2012] Setting source spectrum file to fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Feb 12 15:43:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Feb 12 16:07:40 2012] Not generating rmf since there are only 74 counts
[Sun Feb 12 16:07:40 2012] rmf not generated due to insufficient counts
[Sun Feb 12 17:14:55 2012] Updating aperture counts using extracted products
[Sun Feb 12 17:14:55 2012] Error reading totcts from fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Feb 12 17:14:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 17:14:55 2012] Using photon index=1.80, rate=0.00739, arf fullrun_pn_xmm0656201301_pi300-10000_pass1_cl_src5.arf
[Sun Feb 12 17:14:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 17:14:55 2012] Updating source flux to 5.9e-14
[Sun Feb 12 17:16:12 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting