[Sun Feb 12 11:22:02 2012] Detection parameters:
  Position = (118.7, 173.3) = 5 51 2.13 -62 14 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.3 +/- 9.6
  Background counts = 11.3
  Rate = 0.004 +/- 0.001

[Sun Feb 12 11:22:02 2012] Off-axis axis estimate = 15.88'
[Sun Feb 12 11:22:57 2012] Using EEF radius (= 14.37 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:22:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 11:22:57 2012] Initial guess for spatial extent in simple fitting = 14.37"
[Sun Feb 12 11:22:57 2012] source mask rpix=3.3, npix_max = 57, mask sum = 40, frac = 0.691
[Sun Feb 12 11:22:57 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 14.37"
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src33.ximg exists
[Sun Feb 12 12:28:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src33.csv
[Sun Feb 12 12:28:25 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Feb 12 12:28:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src33.csv
[Sun Feb 12 12:28:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:28:26 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Feb 12 12:28:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Feb 12 12:28:26 2012] fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Feb 12 12:28:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Feb 12 12:28:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:39:12 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 15.307468 pixels away
[Sun Feb 12 13:39:12 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 13:39:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 13:39:12 2012] Assessing source extent using major
[Sun Feb 12 13:39:12 2012] Source does appear to be extended
[Sun Feb 12 13:39:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 13:39:12 2012] Deleting source due to low Poisson probability 0.9