[Sun Feb 12 11:22:05 2012] Detection parameters:
  Position = (278.6, 318.1) = 5 49 22.50 -62 3 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.9 +/- 12.3
  Background counts = 10.2
  Rate = 0.006 +/- 0.0009

[Sun Feb 12 11:22:05 2012] Off-axis axis estimate = 2.02'
[Sun Feb 12 12:53:50 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:53:50 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Sun Feb 12 12:53:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Sun Feb 12 12:53:50 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.44"
[Sun Feb 12 13:39:04 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src7.ximg exists
[Sun Feb 12 13:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 13:39:04 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Feb 12 13:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 13:39:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:39:05 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Feb 12 13:39:05 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Feb 12 13:39:05 2012] Fit fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Feb 12 13:39:18 2012] Source 6 is offset by 1.581407 and 5.912029 pixels which is larger than
2 X fitted extent = 5.055586 x 5.055586, not incorporating fit results
[Sun Feb 12 13:39:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 13:39:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 13:39:18 2012] Assessing source extent using major
[Sun Feb 12 13:39:18 2012] Source does appear to be extended
[Sun Feb 12 13:39:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:30:39 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:30:39 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Sun Feb 12 14:30:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Sun Feb 12 14:30:39 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.44"
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Feb 12 15:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Feb 12 15:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 15:36:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Feb 12 15:36:11 2012] Fit fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Feb 12 15:36:19 2012] Source 6 is offset by 1.627443 and 5.912029 pixels which is larger than
2 X fitted extent = 5.053012 x 5.053012, not incorporating fit results
[Sun Feb 12 15:36:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:36:19 2012] Assessing source extent using major
[Sun Feb 12 15:36:19 2012] Source does appear to be extended
[Sun Feb 12 15:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 16:50:48 2012] XMMSAS src. selection expression = ellipse(24189.384583, 27623.614532, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 16:50:48 2012] Writing source region out to fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src6_src.reg
[Sun Feb 12 16:50:48 2012] Extracting stamp from image fullrun_mos2_xmm0656201301_pi300-10000_cl_sm2.00.img.gz, (241, 281) - (316, 356)
[Sun Feb 12 16:50:48 2012] XMMSAS bgd. selection expression = annulus(24189.384583, 27623.614532, 1087.500000, 2175.000000, X, Y) && !ellipse(24659.689000, 25915.951600, 1136.784033, 962.064028, 79.613840, X, Y) && !ellipse(23536.816000, 26389.088000, 1223.456035, 1223.456035, 0.000000, X, Y) && !ellipse(23655.778000, 25716.946000, 2401.312069, 2401.312069, 0.000000, X, Y) && !ellipse(22841.170000, 24695.470000, 1200.656035, 1200.656035, 0.000000, X, Y)
[Sun Feb 12 16:50:48 2012] Writing fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src6.gif
[Sun Feb 12 16:57:45 2012] Mean detx,y = (-997.48, -2463.47) 
[Sun Feb 12 16:57:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 16:57:54 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 16:57:54 2012] Setting source spectrum file to fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 12 16:57:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Feb 12 17:13:49 2012] Not generating rmf since there are only 76 counts
[Sun Feb 12 17:13:49 2012] rmf not generated due to insufficient counts
[Sun Feb 12 17:14:56 2012] Updating aperture counts using extracted products
[Sun Feb 12 17:14:56 2012] Error reading totcts from fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 12 17:14:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 17:14:56 2012] Using photon index=1.80, rate=0.00588, arf fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src6.arf
[Sun Feb 12 17:14:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 17:14:56 2012] Updating source flux to 5.6e-14
[Sun Feb 12 17:15:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting