[Sun Feb 12 11:22:05 2012] Detection parameters:
  Position = (264.3, 94.8) = 5 49 31.51 -62 20 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.6 +/- 8.4
  Background counts = 4.2
  Rate = 0.003 +/- 0.0006

[Sun Feb 12 11:22:05 2012] Off-axis axis estimate = 14.97'
[Sun Feb 12 12:53:50 2012] Using EEF radius (= 13.91 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:53:50 2012] Initial guess for spatial extent in simple fitting = 13.91"
[Sun Feb 12 12:53:50 2012] source mask rpix=3.2, npix_max = 54, mask sum = 35, frac = 0.640
[Sun Feb 12 12:53:50 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.91"
[Sun Feb 12 13:39:04 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 12 13:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 13:39:04 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 12 13:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 13:39:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:39:05 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 12 13:39:05 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 12 13:39:05 2012] Fit fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 12 13:39:18 2012] Spatial fit model total counts = 78.051300, observed total counts = 85.000000
[Sun Feb 12 13:39:18 2012] Offset between fit and detection position for source 19 = 2.288395 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.288395 pixels
  Position = (266.6, 95.2) = 5 49 30.11 -62 20 1.3
  Extent = 14.2 (9.6-17.1)", rotation angle = 0
  Source counts = 78.7 +/- 8.9
  Background counts = 0.0
  Rate = 0.006 +/- 0.0006
 Deleting source due to low signal-to-noise ratio