[Sun Feb 12 11:22:05 2012] Detection parameters:
  Position = (273.2, 298.3) = 5 49 25.83 -62 5 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.6 +/- 16.9
  Background counts = 10.2
  Rate = 0.01 +/- 0.001

[Sun Feb 12 11:22:05 2012] Off-axis axis estimate = 1.83'
[Sun Feb 12 12:53:50 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:53:50 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Feb 12 12:53:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sun Feb 12 12:53:50 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.34"
[Sun Feb 12 13:39:04 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src4.ximg exists
[Sun Feb 12 13:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src4.csv
[Sun Feb 12 13:39:04 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Feb 12 13:39:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src4.csv
[Sun Feb 12 13:39:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:39:05 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Feb 12 13:39:05 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Feb 12 13:39:05 2012] Fit fullrun_mos2_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Feb 12 13:39:18 2012] Source 11 is offset by -6.518172 and 3.190261 pixels which is larger than
2 X fitted extent = 2.941867 x 2.941867, not incorporating fit results
[Sun Feb 12 13:39:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 13:39:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 13:39:18 2012] Assessing source extent using major
[Sun Feb 12 13:39:18 2012] Source does appear to be extended
[Sun Feb 12 13:39:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 13:39:18 2012] Source is confused with source 4
[Sun Feb 12 14:30:39 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:30:39 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Feb 12 14:30:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sun Feb 12 14:30:39 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.34"
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src4.ximg exists
[Sun Feb 12 15:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src4.csv
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Feb 12 15:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src4.csv
[Sun Feb 12 15:36:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Feb 12 15:36:11 2012] fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Feb 12 15:36:11 2012] Fit fullrun_mos2_xmm0656201301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Feb 12 15:36:19 2012] Source 11 is offset by -6.518172 and 5.097755 pixels which is larger than
2 X fitted extent = 3.238478 x 3.238478, not incorporating fit results
[Sun Feb 12 15:36:19 2012] Spatial fit model total counts = 316.784000, observed total counts = 317.000000
[Sun Feb 12 15:36:19 2012] Offset between fit and detection position for source 11 = 2.278557 pixels
[Sun Feb 12 15:36:19 2012] Warning, changing simple spatial fit ID from 4 to 8
[Sun Feb 12 15:36:19 2012] 301.298600 total counts/ 98.628600 bgd. counts: snr = 20.407417
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.278557 pixels
  Position = (272.5, 296.2) = 5 49 26.31 -62 5 27.3
  Extent = 30.0 (27.6-60.0)", rotation angle = 0
  Source counts = 202.7 +/- 17.4
  Background counts = 98.6
  Rate = 0.01 +/- 0.001
[Sun Feb 12 15:36:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:36:19 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 15:36:19 2012] Source does appear to be extended
[Sun Feb 12 15:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 16:50:48 2012] XMMSAS src. selection expression = ellipse(23655.778000, 25716.946000, 1800.984052, 1800.984052, 0.000000, X, Y)
[Sun Feb 12 16:50:48 2012] Writing source region out to fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src11_src.reg
[Sun Feb 12 16:50:48 2012] Extracting stamp from image fullrun_mos2_xmm0656201301_pi300-10000_cl_sm2.00.img.gz, (169, 193) - (376, 400)
[Sun Feb 12 16:50:48 2012] XMMSAS bgd. selection expression = annulus(23655.778000, 25716.946000, 3001.640086, 6003.280173, X, Y) && !ellipse(24659.689000, 25915.951600, 1136.784033, 962.064028, 79.613840, X, Y) && !ellipse(23536.816000, 26389.088000, 1223.456035, 1223.456035, 0.000000, X, Y) && !ellipse(24189.384583, 27623.614532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22841.170000, 24695.470000, 1200.656035, 1200.656035, 0.000000, X, Y)
[Sun Feb 12 16:50:48 2012] Writing fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src11.gif
[Sun Feb 12 16:56:30 2012] Mean detx,y = (-142.86, -1146.14) 
[Sun Feb 12 16:56:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 16:57:04 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 16:57:04 2012] Setting source spectrum file to fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Feb 12 16:57:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Feb 12 17:14:56 2012] Updating aperture counts using extracted products
[Sun Feb 12 17:14:56 2012] Error reading totcts from fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Feb 12 17:14:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 17:14:56 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0656201301_pi300-10000_pass1_cl_src11.arf
[Sun Feb 12 17:14:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 17:14:56 2012] Updating source flux to 1.3e-13
[Sun Feb 12 17:15:21 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Sun Feb 12 17:15:21 2012] Flag c found in src. 11 procflags, skipping spectral fitting