[Sun Feb 12 11:22:04 2012] Detection parameters:
  Position = (263.6, 94.0) = 5 49 31.96 -62 20 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.8 +/- 7.3
  Background counts = 3.9
  Rate = 0.002 +/- 0.0005

[Sun Feb 12 11:22:04 2012] Off-axis axis estimate = 15.03'
[Sun Feb 12 12:28:26 2012] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:28:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 12:28:26 2012] Initial guess for spatial extent in simple fitting = 13.95"
[Sun Feb 12 12:28:26 2012] source mask rpix=3.2, npix_max = 54, mask sum = 46, frac = 0.837
[Sun Feb 12 12:28:26 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.95"
[Sun Feb 12 12:53:50 2012] fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_src16.ximg exists
[Sun Feb 12 12:53:50 2012] fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Feb 12 12:53:50 2012] Fit fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_src16 appears to have run properly
[Sun Feb 12 12:53:50 2012] fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Feb 12 12:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Feb 12 12:53:50 2012] fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Feb 12 12:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Feb 12 12:53:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:39:15 2012] Source 18 is offset by -1.913201 and -6.825566 pixels which is larger than
2 X fitted extent = 6.350759 x 6.350759, not incorporating fit results
[Sun Feb 12 13:39:15 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 13:39:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 13:39:15 2012] Assessing source extent using major
[Sun Feb 12 13:39:15 2012] Source does appear to be extended
[Sun Feb 12 13:39:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 13:39:15 2012] Deleting source due to low Poisson probability 0.9