[Fri Dec 16 22:21:15 2011] Detection parameters:
  Position = (300.2, 284.2) = 3 12 53.17 8 21 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.3 +/- 15.6
  Background counts = 24.6
  Rate = 0.01 +/- 0.002

[Fri Dec 16 22:21:15 2011] Off-axis axis estimate = 1.04'
[Fri Dec 16 22:22:49 2011] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:22:49 2011] Initial guess for spatial extent in simple fitting = 6.95"
[Fri Dec 16 22:22:49 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.909
[Fri Dec 16 22:22:49 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 6.95"
[Fri Dec 16 23:55:51 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_src29.ximg exists
[Fri Dec 16 23:55:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_src29.csv
[Fri Dec 16 23:55:51 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Dec 16 23:55:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_src29.csv
[Fri Dec 16 23:55:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:55:52 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Dec 16 23:55:52 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Dec 16 23:55:52 2011] Fit fullrun_pn_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Dec 17 03:38:57 2011] Warning, spatial fit 29 centroid is now closest to src. 25
[Sat Dec 17 03:38:57 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.811148 pixels away
[Sat Dec 17 03:38:58 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 03:38:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 03:38:58 2011] Assessing source extent using major
[Sat Dec 17 03:38:58 2011] Source does appear to be extended
[Sat Dec 17 03:38:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 03:38:58 2011] Source is confused with source 28
[Sat Dec 17 03:39:32 2011] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 03:39:32 2011] Initial guess for spatial extent in simple fitting = 6.95"
[Sat Dec 17 03:39:32 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.909
[Sat Dec 17 03:39:32 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 6.95"
[Sat Dec 17 05:46:37 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_src21.ximg exists
[Sat Dec 17 05:46:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_src21.csv
[Sat Dec 17 05:46:37 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Dec 17 05:46:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_src21.csv
[Sat Dec 17 05:46:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 05:46:37 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Dec 17 05:46:37 2011] fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Dec 17 05:46:37 2011] Fit fullrun_pn_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Dec 17 08:35:39 2011] Source 30 is offset by -4.659618 and 5.570383 pixels which is larger than
2 X fitted extent = 0.798786 x 0.798786, not incorporating fit results
[Sat Dec 17 08:35:39 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 08:35:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 08:35:39 2011] Assessing source extent using major
[Sat Dec 17 08:35:39 2011] Source does appear to be extended
[Sat Dec 17 08:35:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 08:35:57 2011] XMMSAS src. selection expression = ellipse(26071.439270, 24675.167328, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 08:35:57 2011] Writing source region out to fullrun_pn_xmm0656201101_pi300-10000_pass1_cl_src30_src.reg
[Sat Dec 17 08:35:57 2011] Extracting stamp from image fullrun_pn_xmm0656201101_pi300-10000_cl_sm2.00.img.gz, (263, 247) - (338, 322)
[Sat Dec 17 08:35:57 2011] XMMSAS bgd. selection expression = annulus(26071.439270, 24675.167328, 1087.500000, 2175.000000, X, Y) && !ellipse(24236.713135, 25962.668030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24700.970000, 25536.816000, 657.259219, 657.259219, 0.000000, X, Y) && !ellipse(25121.608000, 26122.508000, 1075.984031, 1075.984031, 0.000000, X, Y) && !ellipse(26597.242000, 27476.224000, 2228.480064, 2228.480064, 0.000000, X, Y) && !ellipse(25350.508000, 27298.892000, 1159.216033, 1159.216033, 0.000000, X, Y) && !ellipse(23654.232000, 26474.812000, 1140.536033, 1140.536033, 0.000000, X, Y) && !ellipse(26233.642000, 27126.254000, 1156.496033, 1156.496033, 0.000000, X, Y) && !ellipse(27475.280701, 26313.373505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25977.860107, 26137.249481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23052.230225, 26217.811035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27456.868073, 25864.269989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.986000, 25436.008020, 1125.032032, 450.770413, 100.839000, X, Y) && !ellipse(25622.708000, 24537.512000, 2294.032066, 2294.032066, 0.000000, X, Y) && !ellipse(27640.381200, 25311.806000, 1091.720031, 1091.720031, 0.000000, X, Y) && !ellipse(25987.586000, 24367.178000, 1106.648032, 1106.648032, 0.000000, X, Y) && !ellipse(26109.096000, 23651.772000, 1147.016033, 1147.016033, 0.000000, X, Y) && !ellipse(25123.981445, 24070.460510, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 08:35:57 2011] Writing fullrun_pn_xmm0656201101_pi300-10000_pass1_cl_src30.gif
[Sat Dec 17 08:46:55 2011] Mean detx,y = (-1430.77, 369.73) 
[Sat Dec 17 08:46:57 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 08:47:12 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 08:47:13 2011] Setting source spectrum file to fullrun_pn_xmm0656201101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Dec 17 08:47:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0656201101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Dec 17 13:04:20 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 13:04:20 2011] rmf not generated due to insufficient counts
[Sat Dec 17 14:40:09 2011] Updating aperture counts using extracted products
[Sat Dec 17 14:40:10 2011] Error reading totcts from fullrun_pn_xmm0656201101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Dec 17 14:40:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 14:40:10 2011] Using photon index=1.80, rate=0.0148, arf fullrun_pn_xmm0656201101_pi300-10000_pass1_cl_src30.arf
[Sat Dec 17 14:40:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 14:40:10 2011] Updating source flux to 4.1e-14
[Sat Dec 17 14:41:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting