[Fri Dec 16 22:21:55 2011] Detection parameters:
  Position = (315.3, 296.0) = 3 12 48.76 8 22 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.2 +/- 9.3
  Background counts = 10.6
  Rate = 0.003 +/- 0.0007

[Fri Dec 16 22:21:55 2011] Off-axis axis estimate = 1.23'
[Sat Dec 17 01:14:51 2011] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 01:14:51 2011] Initial guess for spatial extent in simple fitting = 7.05"
[Sat Dec 17 01:14:51 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Sat Dec 17 01:14:51 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 7.05"
[Sat Dec 17 03:38:46 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src34.ximg exists
[Sat Dec 17 03:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src34.csv
[Sat Dec 17 03:38:46 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src34_1.ximg exists
[Sat Dec 17 03:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src34.csv
[Sat Dec 17 03:38:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 03:38:47 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sat Dec 17 03:38:47 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sat Dec 17 03:38:47 2011] Fit fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sat Dec 17 03:39:21 2011] Spatial fit model total counts = 545.615000, observed total counts = 544.000000
[Sat Dec 17 03:39:21 2011] Offset between fit and detection position for source 34 = 0.312419 pixels
[Sat Dec 17 03:39:21 2011] Warning, changing simple spatial fit ID from 34 to 22
[Sat Dec 17 03:39:21 2011] 518.923440 total counts/ 513.055000 bgd. counts: snr = 0.259084
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.312419 pixels
  Position = (315.2, 296.3) = 3 12 48.78 8 22 20.5
  Extent = 1.7" x 1.7", rotation angle = 0
  Source counts = 5.9 +/- 22.8
  Background counts = 513.1
  Rate = 0.0004 +/- 0.002
  Deleting source due to low Poisson probability