[Fri Dec 16 22:21:54 2011] Detection parameters:
  Position = (271.1, 283.1) = 3 13 1.72 8 21 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.2 +/- 11.2
  Background counts = 12.6
  Rate = 0.005 +/- 0.0009

[Fri Dec 16 22:21:55 2011] Off-axis axis estimate = 2.27'
[Sat Dec 17 01:14:51 2011] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 01:14:51 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Sat Dec 17 01:14:51 2011] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.648
[Sat Dec 17 01:14:51 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 7.57"
[Sat Dec 17 03:38:46 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src21.ximg exists
[Sat Dec 17 03:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src21.csv
[Sat Dec 17 03:38:46 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Dec 17 03:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src21.csv
[Sat Dec 17 03:38:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 03:38:47 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Dec 17 03:38:47 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Dec 17 03:38:47 2011] Fit fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Dec 17 03:39:21 2011] Source 24 is offset by -6.286601 and -6.488672 pixels which is larger than
2 X fitted extent = 0.869641 x 0.869641, not incorporating fit results
[Sat Dec 17 03:39:21 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 03:39:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 03:39:21 2011] Assessing source extent using major
[Sat Dec 17 03:39:21 2011] Source does appear to be extended
[Sat Dec 17 03:39:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 03:39:21 2011] Source is confused with source 11
[Sat Dec 17 06:51:03 2011] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:51:03 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Sat Dec 17 06:51:03 2011] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.648
[Sat Dec 17 06:51:03 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 7.57"
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Dec 17 08:35:31 2011] Fit fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src19 appears to have run properly
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Dec 17 08:35:31 2011] Fit fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Dec 17 08:35:49 2011] Spatial fit model total counts = 2491.110000, observed total counts = 2490.000000
[Sat Dec 17 08:35:49 2011] Offset between fit and detection position for source 24 = 8.314204 pixels
[Sat Dec 17 08:35:49 2011] Warning, changing simple spatial fit ID from 19 to 2
[Sat Dec 17 08:35:49 2011] 1752.704000 total counts/ 1210.840000 bgd. counts: snr = 15.572090
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 8.314204 pixels
  Position = (279.2, 284.7) = 3 12 59.33 8 21 30.0
  Extent = 23.4 (17.1-27.5)", rotation angle = 0
  Source counts = 541.9 +/- 41.9
  Background counts = 1210.8
  Rate = 0.04 +/- 0.003
[Sat Dec 17 08:35:49 2011] Spatial fit model total counts = 2563.870000, observed total counts = 2566.000000
[Sat Dec 17 08:35:49 2011] Offset between fit and detection position for source 24 = 1.333501 pixels
[Sat Dec 17 08:35:49 2011] Warning, changing simple spatial fit ID from 2 to 5
[Sat Dec 17 08:35:49 2011] 2183.970000 total counts/ 1144.600000 bgd. counts: snr = 30.721563
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.333501 pixels
  Position = (280.5, 284.3) = 3 12 58.96 8 21 28.0
  Extent = 27.7 (25.5-28.7)", rotation angle = 0
  Source counts = 1039.4 +/- 46.7
  Background counts = 1144.6
  Rate = 0.07 +/- 0.003
[Sat Dec 17 08:35:49 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 08:35:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 08:35:49 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 08:35:49 2011] Source does appear to be extended
[Sat Dec 17 08:35:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 13:56:33 2011] Counts = 1039.370000, rescaling region sizes by 2.000000
[Sat Dec 17 13:56:33 2011] XMMSAS src. selection expression = ellipse(24354.012000, 24681.858000, 3318.660095, 3318.660095, 0.000000, X, Y)
[Sat Dec 17 13:56:33 2011] Writing source region out to fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src24_src.reg
[Sat Dec 17 13:56:33 2011] Extracting stamp from image fullrun_mos2_xmm0656201101_pi300-10000_cl_sm2.00.img.gz, (90, 94) - (471, 475)
[Sat Dec 17 13:56:33 2011] XMMSAS bgd. selection expression = annulus(24354.012000, 24681.858000, 11062.200318, 22124.400637, X, Y) && !ellipse(23079.364624, 27004.241333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24876.823600, 25460.939000, 1100.464032, 1100.464032, 0.000000, X, Y) && !ellipse(24802.056000, 25948.664000, 1387.280040, 1387.280040, 0.000000, X, Y) && !ellipse(25354.632000, 26519.560000, 1132.072033, 255.210407, 90.807000, X, Y) && !ellipse(24695.684000, 25387.120000, 1148.768033, 1148.768033, 0.000000, X, Y) && !ellipse(28527.799400, 27929.346800, 358.992810, 358.992810, 0.000000, X, Y) && !ellipse(23832.068085, 25975.444031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.116302, 25790.473450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25015.433280, 27412.376000, 762.806422, 762.806422, 0.000000, X, Y) && !ellipse(25831.599854, 26478.179138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25585.417572, 30341.132599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26729.317200, 24858.009400, 816.792024, 816.792024, 0.000000, X, Y) && !ellipse(25871.727966, 24919.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26764.818756, 25694.071991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22077.637800, 19924.694400, 441.497613, 441.497613, 0.000000, X, Y) && !ellipse(26562.651550, 26657.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26708.282400, 24875.190000, 815.304023, 815.304023, 0.000000, X, Y) && !ellipse(24162.420105, 27367.807770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.493530, 26943.098663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25674.315918, 27423.974915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.338000, 24459.998000, 1095.008032, 1095.008032, 0.000000, X, Y) && !ellipse(25707.113495, 23964.681488, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 13:56:33 2011] Writing fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src24.gif
[Sat Dec 17 14:00:31 2011] Mean detx,y = (71.64, -968.54) 
[Sat Dec 17 14:00:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 14:10:59 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 14:11:00 2011] Setting source spectrum file to fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Dec 17 14:11:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Dec 17 14:40:11 2011] Updating aperture counts using extracted products
[Sat Dec 17 14:40:11 2011] Error reading totcts from fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Dec 17 14:40:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 14:40:11 2011] Using photon index=1.80, rate=0.0747, arf fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src24.arf
[Sat Dec 17 14:40:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 14:40:11 2011] Updating source flux to 6e-13
[Sat Dec 17 14:40:56 2011] Flag b found in src. 24 procflags, skipping spectral fitting
[Sat Dec 17 14:40:56 2011] Flag c found in src. 24 procflags, skipping spectral fitting