[Fri Dec 16 22:21:54 2011] Detection parameters:
  Position = (308.2, 295.9) = 3 12 50.84 8 22 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.4 +/- 12.5
  Background counts = 11.6
  Rate = 0.006 +/- 0.0009

[Fri Dec 16 22:21:55 2011] Off-axis axis estimate = 0.73'
[Sat Dec 17 01:14:51 2011] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 01:14:51 2011] Initial guess for spatial extent in simple fitting = 6.79"
[Sat Dec 17 01:14:51 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Sat Dec 17 01:14:51 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 6.79"
[Sat Dec 17 03:38:46 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src18.ximg exists
[Sat Dec 17 03:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src18.csv
[Sat Dec 17 03:38:46 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Dec 17 03:38:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src18.csv
[Sat Dec 17 03:38:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 03:38:47 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Dec 17 03:38:47 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Dec 17 03:38:47 2011] Fit fullrun_mos2_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Dec 17 03:39:21 2011] Warning, spatial fit 18 centroid is now closest to src. 26
[Sat Dec 17 03:39:21 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 03:39:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 03:39:21 2011] Assessing source extent using major
[Sat Dec 17 03:39:21 2011] Source does appear to be extended
[Sat Dec 17 03:39:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 03:39:21 2011] Source is confused with source 19
[Sat Dec 17 06:51:03 2011] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:51:03 2011] Initial guess for spatial extent in simple fitting = 6.79"
[Sat Dec 17 06:51:03 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Sat Dec 17 06:51:03 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 6.79"
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src16.ximg exists
[Sat Dec 17 08:35:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src16.csv
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Dec 17 08:35:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src16.csv
[Sat Dec 17 08:35:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Dec 17 08:35:31 2011] fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Dec 17 08:35:31 2011] Fit fullrun_mos2_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Dec 17 08:35:49 2011] Warning, spatial fit 16 centroid is now closest to src. 19
[Sat Dec 17 08:35:49 2011] Source 20 is offset by -2.472060 and -5.819885 pixels which is larger than
2 X fitted extent = 0.908805 x 0.908805, not incorporating fit results
[Sat Dec 17 08:35:49 2011] Source 20 is offset by 4.241549 and -1.074368 pixels which is larger than
2 X fitted extent = 0.790400 x 0.790400, not incorporating fit results
[Sat Dec 17 08:35:49 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 08:35:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 08:35:49 2011] Assessing source extent using major
[Sat Dec 17 08:35:49 2011] Source does appear to be extended
[Sat Dec 17 08:35:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 13:56:33 2011] XMMSAS src. selection expression = ellipse(26764.818756, 25694.071991, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 13:56:33 2011] Writing source region out to fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src20_src.reg
[Sat Dec 17 13:56:33 2011] Extracting stamp from image fullrun_mos2_xmm0656201101_pi300-10000_cl_sm2.00.img.gz, (271, 258) - (346, 333)
[Sat Dec 17 13:56:33 2011] XMMSAS bgd. selection expression = annulus(26764.818756, 25694.071991, 1087.500000, 2175.000000, X, Y) && !ellipse(24876.823600, 25460.939000, 1100.464032, 1100.464032, 0.000000, X, Y) && !ellipse(24802.056000, 25948.664000, 1387.280040, 1387.280040, 0.000000, X, Y) && !ellipse(25354.632000, 26519.560000, 1132.072033, 255.210407, 90.807000, X, Y) && !ellipse(24695.684000, 25387.120000, 1148.768033, 1148.768033, 0.000000, X, Y) && !ellipse(28527.799400, 27929.346800, 358.992810, 358.992810, 0.000000, X, Y) && !ellipse(23832.068085, 25975.444031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.116302, 25790.473450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25015.433280, 27412.376000, 762.806422, 762.806422, 0.000000, X, Y) && !ellipse(25831.599854, 26478.179138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26729.317200, 24858.009400, 816.792024, 816.792024, 0.000000, X, Y) && !ellipse(25871.727966, 24919.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26562.651550, 26657.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24354.012000, 24681.858000, 2212.440064, 2212.440064, 0.000000, X, Y) && !ellipse(26708.282400, 24875.190000, 815.304023, 815.304023, 0.000000, X, Y) && !ellipse(24162.420105, 27367.807770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.493530, 26943.098663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25674.315918, 27423.974915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.338000, 24459.998000, 1095.008032, 1095.008032, 0.000000, X, Y) && !ellipse(25707.113495, 23964.681488, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 13:56:33 2011] Writing fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src20.gif
[Sat Dec 17 13:59:49 2011] Mean detx,y = (1983.17, -1601.91) 
[Sat Dec 17 13:59:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 13:59:59 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 13:59:59 2011] Setting source spectrum file to fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Dec 17 13:59:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Dec 17 14:28:34 2011] Not generating rmf since there are only 76 counts
[Sat Dec 17 14:28:34 2011] rmf not generated due to insufficient counts
[Sat Dec 17 14:40:11 2011] Updating aperture counts using extracted products
[Sat Dec 17 14:40:11 2011] Error reading totcts from fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Dec 17 14:40:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 14:40:11 2011] Using photon index=1.80, rate=0.00576, arf fullrun_mos2_xmm0656201101_pi300-10000_pass1_cl_src20.arf
[Sat Dec 17 14:40:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 14:40:11 2011] Updating source flux to 5.5e-14
[Sat Dec 17 14:40:56 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting